Industrial Heaters Dealers in Por, Vadodara

The high temperature Thermic Fluid Heater is a forced Circulation water tube design in which thermic fluid under pressure circulate though a set of nested coils while draft combustion gases travel across the coils. The hot gases envelop the entire tube surface making maximum use of both Radiant & convective heat to achieve very high heat transfer rates. A circulating pump is selected to give the proper flow rate and pressure for each application to optimize motor horse power required while maintaining low film temp. to ensure long fluid life. Temperature controls monitor the output temperature and regulates the supply of fuel & air to the furnace to provide efficient combustion of the fuel.   Features   Excess Air Reduction: Radiant Heat Exchange above the furnace cooled. Hence, less excess air is required and ultimately increase efficiency. Air preheating: combustion air from FD fan passes through air preheater that absorbs the waste heat in the fuel gases. It ultimately results into efficiency increase. Balanced Draught System: It means reduction of infiltration of unwanted air though fire gates of minimum level. It results into maximum heat recovery from air preheater and assures greater efficiency. Multifuel Option: Energy Thermopak is most suitable for Coal, Wood Waste, Bagasse, Lignite etc. for optimum level output with some modification in combustion chamber. Service is extended on client's demand.

• Circulation: 3HP

The high temperature Thermic Fluid Heater is a forced Circulation water tube design in which thermic fluid under pressure circulate though a set of nested coils while draft combustion gases travel across the coils. The hot gases envelop the entire tube surface making maximum use of both Radiant & convective heat to achieve very high heat transfer rates.

• Type: U/Straight/Customized
• Brand Name: Heatbird
• Voltage: Customized
• Condition: New
• Power Source: Electric
• Warranty: 1 year Against Manufacturing defects
• Voltage: 230-440 V
• Place of Origin: Vadodara
• After-sales Service Provided: If Needed.
• Power(Watts): Customized
• Size: Customized
• Heater Material: SS 304/316/310/titanium/incolay/inconel

• Voltage: 110 V / 230 V / 440 V
• Condition: New
• Country of Origin: Made in India
• Brand Name: AMEE
• Terminal Thread Size: M4/M6

• Length: 20-30 Inch
• Finishing: Polished
• Frequency: 50/60 Hz
• Power: 0.3 Kw, 3 Kw, 4Kw
• Packaging Type: Packet, Carton Box
• Heating Capacity: 5.4 To 21.9 KW
• Usage: Industrial Use, Water Heating
• Weight in Kg: 100-200kg
• Size (mm): 32 Mm To 76.2 Mm
• Type: Industrial Heaters
• Brand Name: Deep Heater
• Material: Ceramic
• Shape: Round
• Voltage: 220V
• Automatic Grade: Semi Automatic
• Power Source: Electric
• Phase: Single Phase
• Warranty: 2 Year
• Country of Origin: India
• Diameter (mm): 350mm X100mm, 500 to 800
• Max Temperature: 150 To 250 Degree C, 650 Degree C, 700 Degree C
• Dimensions (mm): 10 Mm, 12.5 Mm, 16 Mm, 19 Mm
• Temperature Capacity: 25-50C, 50-100C, 100-150C
• Specialities: Vibration And Shock Resistance, Rugged Construction
• Condition: New

Features…….  Compact skid mounted system including tank, thermoject-steam injectors, all required inlet/outlet circulating nozzles and automated with complete steam control instrumentation.  Steam is injected using thermoject-steam injectors thereby ensuring zero steam losses, 100% energy utilisation and high energy efficiency due to utilisation of total heat of steam.  Temperature based PID controlled steam control valve ensures instantaneous and continous hot water generation and supply with accurate required temperatures.  Easy to install as system is supplied completely preassembled and skid mounted.  System custom desi   Indirect Heating As the name indicates, in this type of heating, the steam does not come in direct contact with the water to be heated. This type of heating prevents contamination of the water due to steam mixing as in case of direct heating and is used widely in industries where process does not permit such contamination. It is widely used in industry because it provides rapid, even heating. This method uses a heat exchanger, either PHE or shell & tube type, to heat the water   Features…….  Package consists of heat exchanger, interconnecting piping, control instrumentation, pumping traps & required valves and buffer tank.  Total system is skid mounted and compact thereby requiring significantly lesser space than traditional tank based hot water systems.  Buffer tank provided enables the system to be used online in recirculating type hot water circuits.  Efficiently designed heat exchangers and temperature based control instrumentation including control valves enable the availability of hot water instantenously, continuously and at accurate temperatures as required.  Temperature based PID control enables variable temperature settings and stability of settings at variable loads.  For non critical applications, economic versions with on/off control valves & thermodynamic steam trap at condensate outlet can also be provided.   MWHS can be provided with both plate heat exchangers or shell & tube type heat exchangers based on customer preference.  Package includes pumping trap provided at the condensate outlet of the heat exchanger thereby ensuring zero damage to the heat exchanger under stalling conditions and long working life of the heat exchangers.  MWHS is a High energy efficient solution for hot water generation. 100% energy utilisation takes place as system is provided complete with steam operated condensate return pump.  A consolidated experience of more than 30 years in the field of heat transfer technology provides you the MWHS- the modular hot water heating systems. 

We are amongst renowned manufacturers of Industrial Heaters, which are acknowledged for reliability, durability and higher efficiency. Further, these premium quality devices are hassle-free and maintenance free. These are manufactured using high-grade material under a quality bound process and are offered at market leading prices.  

Features Nickle Chrome resistance wire Ceramic fibre insulation Reduce power consumption by 20 to 30% Max 7 watt Cm (50 W SQ inch) Max operation Temp 700 C Specification Standard size for coil heaters Dia : 212” or 65 mm & up Width : 112” or 38 mm & up Voltage : upto 480 V (Single three phase) Terminals : Junction Box fitted with braided cable & post terminal Sneath : SS 304 Thickness : 12 mm Applications Plastic processing machinery Injection & Blow Moulding Extruders

• Features: Shock resistance,Low power consumption,Easy To operate

We are offering Cartridge Heaters

We are offering cartridge heaters. • constructed in brass & ss. • ss or brass sheath is used on all low-density cartridge heaters to provide the best combination of physical strength. • having variety of terminal types like leads, screw or pin type. • also available high density cartridge heater technical data: • helically wound 80/20 nickel chrome or kenthal resistance wire. • high purity magnesium oxide(mgo) is used to fill it. • can be fabricated as per requirement, in different diameters. application: • molds, dies,platens,hot plates,sealing,fluid heating, life sciences,aerospace,semiconductor,foodservice equipment.

• Round: 3,4,4.5,5 mm dia
• Square: 3x3, 3.2x3.2
• Flat: 2.2x4.3, 2.5x4.3, 2.5x4.5, 3x4.5, 3x5.2

Features Higher Watt density Built in type J or K thermocouple Max operation Temp 800 C Even Temp profile Max. heat transfer due to more contact area Max. total length upto 3000 mm Applications Moulds & Dies Nozzle heating Medical equipments Hot runner bushing

Oil Cooling Radiator

Forced hot air treatment plant or Phytosanitary Measures ISPM 15 has been introduced to reduce the global spread of plant diseases and pests associated with the international movement of wooden packaging.

With the help of our advanced engineering skills, we are able to provide a superior range of Electric Transformer Radiators. Our all-welded steel construction radiators are manufactured in compliance with the international standards for quality. The compact and sleek design of our range allows the clients to install it in limited floor space. Clients can avail our range in various 

With wood fired boilers, the pollution caused is high and also requires constant storing, cutting and burning of wood – i.e. additional labor requirements and maintenance. Secondly, the cost of LPG is rapidly increasing and there seems no indication of it even remaining stable. So it is going to be even more expensive to heat water tomorrow than it is today and hence the cost of providing hot water to inmates is going to increase day after day.

heat treatment equipment, punching dies

stainless steel tube heaters, Cooling Towers, cooling tower dg set

electric radiators, Copper Busbar, copper jumper, Industrial Springs

Solar Water Heater, Solar Street Light

Industrial Heater, Thermocouple, ceramic bend heater, mica bend heater

Heat Treatment Machine, metallurgical treatment machine

Infrared Radiant Heater

process heater

industrial electric furnace, castable ceramics, industrial elements heaters