Industrial Machine Dealers in Por, Vadodara

Netting India, specialists in the design and project management of extruded plastic net making technology and Agro shade net made out of PE monofilament/Flat Tape. Having many years’ experience in the design and production of plastic mesh and netting, our knowledge and experience places us at the forefront of the net making design market. Whether our clients are after a die head design, dies, extruders, winders, orientation technologies or full plastic net making lines we are able to offer a full design and project management service. We pride ourselves in being experts in Counter rotation die technology, counter rotating die heads (diamond mesh), Netlon die heads. Complete Manufacturing Lines : Netting India have designed and project managed a large variety of extruded plastic mesh and net making lines. From filtration mesh lines, packaging mesh lines, Agro Shade nets to large scale square mesh and diamond mesh lines for the Geo synthetic industries we have the capabilities and experience to deliver a first class project. Our Netlon and Rotating die technology lines can make following products.Product Size : 0.5 Meter to 2.0 Meter wide and   1.0 mm to 6 mm thicknessProduct Manufactured & Applications : Insect/Mosquito net - Machhar Jali / Nova Curtain/Shopping Bag mesh Garden Landscaping - Garden Fencing/Perimeter Fencing/Balcony net/ Pigeon net/Square mesh /cooler mesh/AC out door unit mesh Geo civil and infra Application - /Geo net Geo 121  / 131  153 /Erosion control net Plaster net Agricultural Application - /Tea weathering net Bird protection net Poultry mesh Industrial/Home and domestic Application - /Filtration Safety net Aquaculture net  

Micro Processor Based Auger Controller Dual Speed for Better Fill Accuracy Option of Time based filling in case of load cell failure VFD Controlled Auger Screw Adjustable Platform Easy Product Changeover Easy Size Changeover

• Material: Mild Steel (Body)
• Frequency: 50 Hz
• Voltage: 380V
• Weight: 310 Kg
• Motor Power: 2.25 kW
• Air Pressure: 0.5-0.8MPa
• Motor rotary speed: 12000 RPM
• Milling size: 100x300mm

Our firm specializes in providing a quality array of Shrink Packaging Machine to our valuable clients from all over the world in accordance with the international quality of standards. Any heat shrinkable materials like PVC, LDPE, CRYOVAC, POLYVOLY, etc. can be used. Due to its accurately controlled tunnel temperature, it can offer neat, clean & wrinkleless wrapping.

• Capacity: 80-100 (Pieces per hour)
• Voltage: 220-280 V
• Power: 5 kW
• Phase: Three Phase
• Material: Mild Steel
• Frequency: 50-60 Hz
• Brand: Yug Industries
• Usage/Application: Industrial
• Automation Grade: Semi Automatic
• Surface Treatment: Color Coated

• Automatic Grade: Automatic

Being a leading name of the industry, we are recognized for our ability of manufacturing, supplying and exporting a ruggedly constructed range of Thermocol Cutting Machine.

• Brand Name: Jay Engineering
• Weight: 650 kg approx.
• Model: Excel 20
• Counter: Digital Preset Counter
• Speed Max: Up to 120 blanks / minute (depends upon stock used)
• Paper Weight: 55 GSM to 350 GSM
• Window Size Max: 6'' x 10'' (150 mm x 254 mm)
• Machine Size: Height 61'', Length 42'', Width 47''
• Electrical: D.C. Motor 1 h.p. with thyristor control, A. C. Motor 1 h.p. with pump single phase
• Capacity: 6000 Paper of 150 GSM
• Film: 15 to 125 micron (Polyester, BOPP or PVC recommended)

• Frequency: 50/60 Hz
• Packaging Type: Bottle Capping
• Capacity (Pouch Per Hour): 40 to 50 Bottles Per Minute
• No. Of Heads: 1 Head
• Type: Cap Sealing Machine
• Brand Name: KASHYAP ENGINEERING
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1 Year

• Weight: 800 kg approx
• Blank size: 18 inch x 23 inch
• Speed: 150 blanks/min
• Paper Weight: 400 GSM
• Window Size Max: 11 inch x 10 inch (280 mm x 254 mm)
• Machine Size: H- 56 inch x L- 88 inch x W- 44 inch
• Electrical controls: D.C. Motor- 1HP
• Pumps: A.C Motor- 1HP With Single Phase Pump
• Film thickness: 125 micron (Polyester & PVC) and 125 micron (BOPP)
• Counter: Digital Preset Counter

• Automation Grade: Fully-automatic
• Voltage: 440 voltage
• Size: 3/4 inch
• Material: Stainless Steel

• Type: Tumbling Barrels
• Application: Industrial Use, Testing Purpose
• Condition: New
• Drive Type: Electric
• Material: M.S. Body and Structure Motor
• Motor Power: 0.5 HP
• Control Panel: Control Panel with Preset Digital Counter
• Features: Proximately Switch Indicator, Auto Stop Unit with Seimence Gray Powder Coating
• Quality: Optimum Quality

The Tumbling barrels simulates repeated falls which may occur to such devices as which operated by  electrical motor.

• temperature: 450 degree Celsius.

Breaking lumps into smaller pieces is not an easy job to do. You may have some myths that this can be done easily without putting any efforts but for précised action we must have to break lumps into required shape and size with proper dimensions at a fixed temperature of 450 degree Celsius. This task can be done precisely with our Lump breaker machines. Being reputed Industrial shredder manufacturers, our research and development team is putting maximum efforts in designing and manufacturing lump breaker machines for the purpose have been successfully operating at their optimum capacity & efficiency with Defense Establishments.

GMP Model Suitable for grinding ointment, paste, paints, and printer’s Ink etc Output 35 kegs. Approximately The roller size 86mm Dia. x 300 mm long. S.S.316 M.S. stand cladded by S.S. 304 sheet 1.5 HP 440 volts Motor  

Automatic Window Patching Machine. USEFUL FOR WINDOW ENVELOPE & PACKAGING PRODUCTS. FEATURES. FOR PACKAGING PRODUCTS PNEUMATICALLY OPERATED ON LINE V CUTTING ATTACHMENT ON LINE CREASING ATTACHMENT 0% FILM WASTAGE STURDY DESIGN QUALITY PASTING HIGH PRODUCTION EASY TO OPERATE

Fostered with vast industry experience and knowledge, we have emerged as the leading manufacturer and supplier of a Clip Assembly Making Machine. This machine is used to make plastic clips and highly appreciated owing to its high operational efficiency and excellent functionality by our patrons. Using optimum grade components and contemporary methodology, the offered machine is engineered by our deft workforce in adherence to set industry norms at our sound production unit. Salient Features: High performance Rugged Construction Requires less maintenance

• Laser: Lamp Pumped Nd:YAG Laser
• Wavelength: 1.064µm
• Transverse Mode: TEMoo
• Beam Diameter: 1.0 mm, nominal , M2 < 2.5

A photovoltaic cell (commonly called a solar cell) is a nonmechanical device usually made from silicon alloys. It converts sunlight into electricity. The PV cell was discovered in 1954 by Bell Telephone researchers. Late 1950s, PV cells were used to power U.S. space satellites.Individual cells can vary in size from about 1 cm (1/2 inch) to about 10 cm (4 inches). Most photovoltaic cells are about ten percent efficient in covering sunlight to electricity with further research being conducted to raise this efficiency to fifteen-twenty percent.Photovoltaic conversion is useful for several reasons. Conversion from sunlight to electricity is direct, so that bulky mechanical generator systems are unnecessary. The modular characteristic of photovoltaic energy allows arrays to be installed quickly and in any size required or allowed.Presently BCSC (Buried Contact Solar Cells) and Polycrystalline CdTe-baser Photovoltaic are the latest technology in the solar cells and having efficiency is around 15-20 % approx. and we can get stable power output and long life.   HOW DOES A SOLAR CELL WORK? Sunlight is composed of photons, or particles of solar energy. These photons contain various amounts of energy corresponding to the different wavelengths of the solar spectrum. When photons strike a photovoltaic cell, they may be reflected, pass right through, or be absorbed. Only the absorbed photons provide energy to generate electricity. When enough sunlight (energy) is absorbed by the material (semiconductor), electrons are dislodged from the material's atoms. Special treatment of the material surface during manufacturing makes the front surface of the cell more receptive to free electrons, so the electrons naturally migrate to the surface. When the electrons leave their position, holes are formed. When many electrons, each carrying a negative charge, travel toward the front surface of the cell, the resulting imbalance of charge between the cell's front and back surface creates a voltage potential like the negative and positive terminals of a battery. When the two surfaces are connected through an external load, electricity flows.   WHAT IS SCRIBING AND WHY SCRIBING IS NECESSARY? Scribing means, cutting of a grid pattern of grooves in a semiconductor material generally for the purpose of marking interconnections or to cut the solar cells into two parts.Laser scribing is done for the fabrication of monolithic cell interconnections. Scribing, either with a mechanical stylus or a laser is used for fabricating series interconnections allowing a large, thin-film photovoltaic panels to be made with, for example, 100 cells monolithically interconnected. The series interconnection allows the same electrical power to be produces from the panel with a voltage 100 times that of an individual cell and the current equal to that of one cell. For CdTe thin films, the individual cell voltage is about 0.8V

Capable of Welding 5000 lugs / 8 hr. shift

• Size: 150 mm x 65 mm.
• Degassing: Vacuum Degassing for Resin Tanks

Twin offers standalone, compact and automated Meter Mix Dispensing Systems for Cover Sealing Application in small battery covers. Twin’s Meter Mix Dispensing Systems can handle all varieties of Epoxy and PU glues used in lid sealing applications. Our extensive experience in automotive industry coupled with knowledge of lid sealing process requirements in battery manufacturing helps to drive easy and quick commissioning. Meter Mix Dispensing system with double metering and mixing heads for higher production rate.

We are Manufacturer of Heavy fabricationStructure work.

• Voltage: 220 - 240 V
• Brand Name: Arnav Impex
• Usage/Application: Hotel
• Automation Grade: Automatic

• Brand Name: PAL
• Country of Origin: Made in India
• Automation Grade: Fully Automatic
• Application: Adhesive bag making
• I Deal In: New Only

• Material: PVC, LD, PET shrinkable
• Gate Size: 250mm x 250mm or on demand change size
• Length of the passage: 680mm or on demand change size
• Width of the passage: 300mm or on demand change size
• Height of the passage: 225mm or on demand change size
• Standard size of the machine: Length 1275mm, Height 1150mm, Width 590mm
• Speed of the conveyor: Fixed or variable on demand
• Temperature: 70°C - 200°C
• Power Load: 6 KW or as per requirement
• Actual weight: 150kgs or as per machine on demand

• Brand Name: Innsale Taknik
• Type Of Bag: Garbage bag
• Bag Material: Plastic

Machine with Rotary or Vertical Attachment are fitted with 3 axis controller.   Standard Rotary small attachment is suitable for components upto 5 kg. weight.   Standard Rotary big attachment is suitable for weight upto 15 kg. Vertical attachment standard is 150mm adjustable. All these machines give true interpolated motion in all 3 axis.

• Type: CNC MACHINE
• Material: WOOD,MDF,THERMOCOL
• Function: CNC
• Model Number: 2614 HSR ( STALLION)
• Brand Name: SOLAR CNC
• Condition: NEW
• Place of Origin: VADODARA GUJARAT
• Rated Power: 12 KW
• Power: 12 KW
• After-sales Service Provided: YES

• Country of Origin: Made in India
• Capacity: 20-40 (Pieces Per Hour)
• Type Of Bag: Shopping Bag
• Brand: Ashok Industries
• Usage/Application: Carry bag making
• I Deal In: New Only
• Bag Material: Plastic
• Automation Grade: Semi Automatic
• Bag Bottom Shape: V Shape

Charging the battery in modern days is not a difficult job but to charge the battery as per battery requirement is very important which not only charge the battery but also increase the life span of Battery . “AQUILA” make battery Charger will get rid of all your charging related problems, even a lay man or naon techanical person can charge it as it si designed to charge it properly & person can charge is as it is designed to charge it properly & automatically with inbuilt protection with all possible faults. It is made user friendly by undertaking detailed study of individual requirement of every customer. Application of Battery Charger :        For DG set     For material handling equipment( fork lift,stacker & battery operated vehical)     auto mobile battery charging     industrial charging     For USP/ Inverter     For marine,railway & Defence application     Automation system     power generation systems.