Industrial Plastic Pipes Dealers in Lamdapura, Vadodara

• Shape: Round

• Application: Drinking Water, Utilities Water, Chemical Handling, Plumbing
• Single Piece Length: 3 meter, 6 meter, 18 meter
• Size: 1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch

• Tube Diameter: 26 Mm Od Min To 168.3 Mm Od Max.
• Tube Thickness: Minimum 2 Mm

High frequency welded spiral fin tubes this is important in maintaining negligible resistance to heat transfer between the fin and tube. Hf welded fins shows less extensive heat affected zone, the affected depth is minimal when compared to other types of welding.

• Thickness: 5mm
• Material: FRP
• Shape: Square
• Application: Construction

We are leading manufacturer of Project Piping Spools and Jacketed Piping Spools. MATERIAL: Carbon Steel, Stainless Steel & Alloy Steel etc. SIZE: Up to 36″ Pipe Size RATTING: Up to 900# SERVICE OFFERED: Drawing Preparation, Raw material Procurement, Fabrication work, Testing Performed as per QAP, Documentation etc.

• Material: Fiberglass
• Brand Name: FRP Solution
• Shape: Round
• Single Piece Length: 3 meter

Application :   Electrical & Industries as per client's requirements.   Availability : Cylinders & Pipes up to 3.5 M Ø x 8.0 M Length can be made.  

• Shape: Round
• Usage/Application: Chemical
• Diameter: 100 MM TO 4000 MM
• Length of Pipe: 12 m
• IS Code: 12709 / 14402
• Length: 12m
• Thickness: 3 TO 30 m

We are offering grp pipe. As we are a renowned grp pipe exporter and grp manufactuer based in india. Our grp pipe and grp pipe fittings have been widely appreciated throughout our esteemed clients. We proffer unmatched quality at very reasonable prices. We manufacture world best class grp pipe and grp fittings at reasonable prices. All pipes are designed as per the following procedure: selection of liner and resin system is based on corrosion data design of winding patterns laminate thickness is based on a) pressure b) stiffness design optimization using multifactor analysis finite element analysis using proprietary software for calculating stress windability check application: water transmission (transmission pipeline, intake pipeline , irrigation) effluent water sewer (gravity pipelines, pumping mains & outfall pipelines) industrial effluent industrial ducting well casting cooling water fire protection industrial wastes & effluents sea water food industries (refineries & breweries) chemical & petrochemical industries power plants oil & gas pulp refinery water desalination plants power plants pumping stations gas piping non corrosive piping jointing system of pipes & fittings restrained (tensil resistant) flanged joint butt and wrap joint non –restrained bell and spigot double bell coupling flanged joint to enable connections with steel & to allow for easy assembling & disassembling of process lines, grp pipes & fittings can be supplied with flanges, drilled in accordance with ansi, bs, din or other specification. Special requirement can be met upon request. Butt & wrap joint in general these joint will only be used for diameter over 100 mm. The preparation of this rigid joint requires good craftsmanship. Bell & spigot joint the socket end of this joint is an integral filament wound part of the pipe. The spigot end is a machined part on which o-ring seal is positioned. The flexible joint allows for axial movement of the spigot in the socket & some permissible angular deflection. Double bell coupling short pipes are joined using double bell coupling. The sealing of the joint is achieved by the compression of two elastomeric rubber gaskets when the joint is assembled. Testing procedures: we at balaji fiber reinforce pvt. Ltd. Imply internationally accepted procedures for testing pipes with latest technology and expertise. raw materials we purchase only from iso 9000 certified companies. The major raw materials are : chopped strand mat (csm): 225, 300 & 450 gsm e or c glass roving: 1200, 2400 and 4800 tex resin system: vinyl ester, super vinyl ester, isopthalic & orthophthalic polyester resin woven roving mat (wrm): 450 & 600 gsm product testing every pipe has been through following test: visual inspection (astm d2563) hydrostatic leak tightness test to 1.5 to 2 times rated pressure (awwa c 950) dimensional check for wall thickness, length & diameter (astm d3567) resin cure by barcol hardness batch testing: one pipe in every 100 pipes or lot size as specified by the customer is subjected to the following test: axial tensile strength (astm d2105/d638) hoop tensile strength (astm d2290) structural integrity at deflected condition (astm d2412) stiffness & flexural modulus (astm d2412) type testing: pipes manufactured with new resin systems or a new project is subjected to the following tests: impact resistance (bs 5480) ong term strength – hydrostatic design basis (astm d 2992) pipe joints using flexible elastomeric seals (astm d4161) strain corrosion (astm d3681)

• Type: PVC BRAIDED HOSE PIPE
• Brand Name: DISLON
• Material: PVC
• Diameter: 6 MM TO 50 MM
• Thickness: 2 TO 8 MM
• Length: 300 MTR
• PVC GREEN SUCTION HOSE: 100000

We are manufacturing pvc nylon braided hose and pvc garden braided pipe in our vadodada plant we are also manufacturing suction hose heavy duty.

Netpune industries is one of the leading manufacturing & supplying company of high quality pvc braided multipurpose water hose in india.

fiberglass reinforced plastic pipes

PVC Food Grade Braided Pipe, Abrasion Resistant Liners, workshop tools

cosmetic plastic tube, Hydrated Magnesium Aluminium Silicate

Piping System and Solutions, Cast Iron Light Pole, Thermosetting Resins

Piping, heat coil boiler, Air Coolers

mdpe hdpe pipes

FRP Duct Pipe, FRP Balusters, GRC Planters, GRC columns, GRC Balusters

Piping, Milk Storage Tanks, Vessels

electro fusion pipe