Industrial Shafts Dealers in Vadodara

• Material: Cast Iron
• Brand Name: Nirala Engineers
• Color: Golden
• Country of Origin: Made in India
• Finishing Type: Polished
• Usage/Application: Industrial
• Surface Hardness: 165 HRC
• Tolerance: 0.02 mm
• Size: 150 mm
• Speed: 1200 Rpm

As a quality-conscious firm, we make sure that the offered lot is sternly packed using the best quality packaging material. However, we source the packaging material from the genuine vendors. We are Vadodara(India) based organization, involved in providing high quality array of products at competitively low prices.

• Brand Name: motor shaft
• Usage/Application: motor manufacturing
• Phase: Three Phase
• Motor Part Type: Motor Startor
• Power: 2hp-3hp
• Type Of Motor: AC Motor
• Material Type: Stainless Steel
• Phase Of Motor: Three Phase
• Minimum Order Quantity: 150 Piece

• Country of Origin: India
• Type: Metal Shaft
• Material: Metal
• Diameter: 20mm to 230mm
• Shape: Cylendrical
• Length: 100mm to 450mm
• Application: As per requirements
• Color: As per client requirement
• Feature: Fine Finishing
•  Finishing: As per client requirement
• CNC Machining or Not: CNC machined

We are the leading manufacturer and exporter of CNC Precision Shaft as we assure about our best quality .

• Material (Pipe): Steel or Aluminum
• Material (Luge): Steel, Rubber or Plastic

Grippers are slit through the metal pipe and pneumatic bladder is used for inflating. The grippers give positive holding of the core. These shafts are strong & ridged, Standardized design allow us to manufacture the shaft in any size diameter, The same design can be offered for heavy duty to light capability shaft, Simple design ensuring a long service, Staggered lug design makes it best in winding application. Each gripper offers a designed chamfer for easy core insertion, Dimensional tolerance of journal is very tight for better fitting & rigidity during operation.

Seal N Cut, Gujarat is highly acclaimed as the leading Jaw shaft manufacturers in India. We supply our customers and clients with a wide range of machines. One such product that you can get in our company is the machine jaw shaft. These are manufactured using good quality materials and under the strict observation of our experts. We strictly follow the industrial standards using the best quality materials procured from reputed vendors and dealers of the market. Before the final dispatch in the market, we check all our machines so that our customers get only quality products from our company. The packaging machine jaw shaft is tested on various standard quality parameters by experts. These machines have amazing features which makes them popular in the market. Some are as follows: Easy To Install The machines that we supply to our customers are easy to install and user-friendly. You can easily and without any trouble set the machine and use it for different purposes in your company. Wear And Abrasion Resistant The machines of our company are resistant to corrosion and don’t wear out easily. It can be used for years without any problem. Precise Dimensions We build our machines following precise dimensions and also according to the specifications given by our customers and clients. For more information call us and speak to our executive director. They will help you learn better about the machines and will also help you to choose better. We are the best packaging machine jaw shaft supplier.

we offer Screw Shaft. Screw shafts are designed to carry high torque load , spline and other locking system steel Microalloyed

• Material: Stainless steel
• Shaft Diameter: 5-10 mm
• Brand Name: Specific
• Technique: Vacuum heat treatment, Deep cryogenic treatment
• Surface treatment: Polished
• Shaft Length: 300-500 mm

• Material: M.S, S.S, CARBON STEEL
• Brand Name: BI
• Length: Up to 30 Inch
• Diameter: 12mm to 22mm Outer and Inner
• Hardness: Flexible

Air Shafts (expanding) Are Expanded Immediately Under Air Pressure For Instant Roll Mounting And Gripping Securely And Fast Without Damage To The Core Or Roll. Moreover, At The Touch Of The Fingers (keys, Lugs Etc.) Between Shaft And Core, They Collapse Positively For Quick Roll Removal. The Shafts Consist Of Three Basic Parts - A Metal Body Cast In Tough, Durable, Steel Or Aluminum Alloy, An Uniquely Elastomeric Air Expanding Element & Dimensional Tolerance Of Journal Is Very Tight For Better Fitting & Rigidity During Operation. Simplicity And High Reliability Of Shaft Design, And High Tension Strength-to- Weight Ratio Assure Rugged, Reliable Performance With Minimum Maintenance In Excellent Economy And Ease Of Operation. All Air (expanding) Customized (oem And Odm) Shafts (button, Key, Lug, Leaf Types) Are Our Custom Manufactured To Your Specifications. And Standardized Components Facilitate Quick, Cost-effective Construction And Replacement .

• Brand Name: MES
• Length: 3000 mm
• Coatings: Black Oxide
• Place of Origin: Gujarat, India

• Material: Metal
• Shape: Round
• Condition: New
• Application: Connecting Shafts And Pipes
• Size: Customised
• Feature: Corrosion Proof, Crack Proof, Durable, High Strength, Perfect Shape
• Type: Motor Shafts
• Country of Origin: India

An Automotive Spline Shaft is a drive shaft that consists of ridges or teeth. We manufacture and supply all types of Automotive Spline Shafts, which include parallel key, involute, crowned, serrations, helical and ball spline shafts. We use the best grade steel to manufacture Automotive Spline Shafts, and strictly follow the specified fabrication norms. The prices of our Automotive Spline Shafts are very reasonable.Specifications : Full flank fit Large contact area Equal size tooth to space ratio Same pressure angle as parallel sided spline 3x the work surface of parallel sided spline Mating sleeves or flanged bushings

• Material: Stainless Steel
• Technique: Hot Rolled
• Grade: SS 302
• Color: Silver
• Rust Proof: Yes

• Length: 50 TO 2000
• Material: 17CrNiMo6,EN 353,EN24,EN19,EN9
• Diameter: 20 TO 700
• Country of Origin: Made in India
• Hobbling Capacity: 0.5 MODULE TO 25 MODULE
• Surface Treatment: HARDENING
• I Deal In: New Only

Worm Shaft are cut on Thread Milling Machine with High speed steel Worm Cutters. Single or any multi Starts Worms are cut as per requirements. Pressure Angle of 20deg. as well as 14.5 deg. cutters used for Worm Cutting available. Worm Shafts are hardened and ground for long life. Minimum Module : 0.2 mm Maximum Module : 18 mm Worm Wheel Teeth are cut on Hobbing machine ( Generating Process ) by single & multi starts special worm Hub Cutter as per requirement. Pressure Angle of 20deg. as well as 14.5 deg. cutters used for teeth Cutting available. Hub Cutter available for any non standard Module or D.P. for worm wheel.

• Shape: Customised
• Material: Aluminium, SS
• Brand Name: Self
• Color: Any
• Features: Abrasion resistance,High tensile strength,Rugged design
• Usage/Application: Industrial
• Size: Customised
• I deal in: New Only

• Material: Strainless Steel
• Brand Name: AES Hydro
• Technique: Hot Rolled
• Weight: 60000 kg
• Use: Steam Turbine
• Finish Type: Chrome Finish

• Material: Alloy Steel, Cast Iron, Stainless Steel
• Diameter: 1.5mm, 1mm, 2.5mm, 2mm
• Shape: Cylendrical, Round
• Length: 1mtr, 2mtr, 3mtr, 4mtr, 5mtr
• Application: Automotive Use
• Color: Black, Metalic Silver, Shiny Silver, Silver
• Feature: Corrosion Resistance, Durable, Fine Finishing, Hard Structure, High Efficiency, Light Weight, Low Maintenance
•  Finishing: Coated, Non Coated

Our air shaft are made with high quality material & rubber we are provide different types & size of air shaft, leaf type air shaft button type air shaftleg type air shaft.

• Length: 6000 mm(240 Inch)
• Brand Name: Resource
• Pipe Material: Steel or Aluminum, Carbon Fiber
• Core ID Size: 3 Inch to 12 Inch
• Luge Material: Steel, Rubber or Plastic
• Available Options: Cantilever shaft Various size of lug (Gripper) available Rotary Union air supply possible

• Country of Origin: India
• Type: Metal Shaft
• Material: Metal
• Diameter: 125mm
• Shape: Round
• Length: 300mm
• Application: welding
• Color: copper red
• Feature: Corrosion Resistance, Durable, Fine Finishing, High Efficiency, Low Maintenance
•  Finishing: Non Coated
• CNC Machining or Not: yes
• Material Capabilities: excellent
• Micro Machining or Not: Yes
• Torque Capacity: Yes
• Color: Copper RED
• Usage: Welding machine

For conveyance of air and neutral gases. Available in 22 sizes. Patented 3-lobe positive displacement blowers with pulsation cancellation. 100% oil-free design using labyrinth, wear free seals. Gas tight designs are available. Vertical flow direction. Suitable for V-belt and direct drive configurations. Click Here To View More Details

• Material: Mild Steel
• Color: Brown (Base)
• Shape: Round
• Usage/Application: Rolling Shutter
• Size: 6 Inch (D)
• Size: 6 Feet (L)
• Weight: 200 Kg
• Mount Type: Wall Mount
• Surface Treatment: Color Coated

• Brand Name: SE
• Color: CHROME STEEL
• Shape: Cylindrial shaft
• Size: Ø500 X 1600
• barrel length: 1000MM
• Usage/Application: Industrial
• Dimension: 500
• Packaging Type: Special cage with brg. sheet resting and clamping
• Item Code: 7214

We are 20 years old leading steel forging company based in vadodara, india, manufacturing steel forged flanges. We have recently installed 4500 ton open die forging press along with 60 ton rail bound manipulator along with related heat treatment furnaces based on n gas, polymer and water quenching tanks in a new heavy steel forging plant located in baroda city of gujarat state of india. We can manufacture and supply following products upto 40 tons weight single piece. • forged steel flanges up to 72" • forged steel bars, rolls and shafts, step shafts from 160 to 1000 mm dia. • discs forgings up to 3000 mm dia. • valve body, hollow shell, rings, forgings etc. we can manufacture all above products in various types of steels like carbon steel, stainless steel, alloy steel, duplex stainless steel etc. We have our own heavy machining facility and in house test facility for quality control along with qualified and experienced manpower in the field of heavy forgings.

10mm Linear Rail Shaft Support made of Aluminium and  Anodized surface finish, Shaft Support suitable for 10mm Diameter Shaft used in CNC, 3D Printing applications