Instrumentation Equipment Dealers in Waghodia Road, Vadodara

Programmable logic controller (PLC) control panels or also known as PLC Automation Panel are one of the most important and efficient kinds of control panels. Which are generally used in various kind of electronic and electrical circuit fittings. PLC Control Panels we manufacture are highly capable of giving higher output at less power consumption, Integrated with solid PLC logic and flawless PLC hardware programming. We are engaged in designing and manufacturing of PLC & Automation Panels that is widely appreciated for longer service life and high efficiency. All these panels are hard wired; PLC based and electrically controlled and are used for various machines. PLC-HMI/SCADA Development and Drive synchronization We are working as a freelancer for PLC-HMI Development and Drive.

In order to deliver consistent quality products, we keep our vigil eyes on product development, storage and final dispatch. With the aid of our updated transit facilities, we are capable of delivering the orders at requested destinations with ease.

• Accuracy: 0.5 %
• Feature: Commendable Sturdiness, High Resistance to Corrosion, Superior Capacity
• Power Supply: 24 VDC
• Input Pressure: 0.1 / 1.6 / 2.5 to 200 Bar
• Output Voltage: 4 to 20mA
• Quality: Optimum Quality
• MOQ: As per Requirment

• Insulation Material: XLPE
• Number of Cores: 3.5 & 4 Cores
• Jacket: PVC

The material that we make use for manufacturing the offered lot of products is of fine quality and tested prior to production of the offerings. Buyers can stay rest assured with us for their orders as we ensure zero damage to the products that we deliver. For this, we store the entire lot in a spacious warehouse till the final dispatch.

• Type: Outdoor/ Indoor
• Feature: Robust Design, Completely Tested
• Material: Metal
• General Use: Controlling of the incoming power supply voltage and its distribution among the other appliances
• Rating: 440V, MCCB/ACB
• Suitable for outdoor for HT: VCB/LBS. Transformer and LT Distribution

Approvals: ERDA Tested, Gujarat Electricity Board, Gujarat Electrical Inspector Approved. VCB 12KV 630/1250AMPS IEC -62271 – 100/200 The Insulation Level is 12/28/75 KVP Rated Short Time With Stand Current 26.3KA/3 Sec. Rated Making Capacity 66.75 KAP Vacuum Interrupter V G E 4 Type CT / PT Compartment with Trolly Provision Electronic Trivactor Meter fitting provision Bottom Cable Entry Tamper Proof

• Size: As per Design
• Type: Electrical Control Panel Board
• Application: Electrical Control
• Color: As per Specification
• Voltage: 110V, 220V, 380V, 440V
• Material: Mild Steel, G.I
• Power: As per Load Required
• Power Source: Electric
• Phase: Single Phase, Three Phase
• Warrenty: 1 Year
• Autoamatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Country of Origin: India

• Type: Motor Starters
• Material: Cermaic, China Clay, Plastic
• Application: Motor Switching
• Color: Available in Many Colors
• Voltage: 220V
• Frequency: 50Hz
• Tensile Strength: 0-25Mpa, 100-125Mpa
• Warranty: 1 Year
• Temperature: High Temperature
• Phase Type: Double Phase, Single Phase, Triple Phase

We are offering fully automatic plc control machine. Rotational moulding 4 arm biaxial machine for plastic hollow and big artical

The company is a Manufacturer, Supplier and Exporter of Metering Cubicle. The range of Metering Cubicle made available by us is manufactured using the best quality materials and production techniques. Metering Cubicle, up to 36kv Metering Cubicle is available at the best prices in the market.

• Material: Plastic
• Color: Black
• Usage: Industrial

• Type: Aluminium Busbar
• Material: Aluminium
• Thickness: 2-20mm
• Certification: ISO 9001:2008 Certified
• Length: 1000-2000mm
• Application: Industry, Electrical
• Feature: High Quality
• Width: 1-50mm, 100-150mm, 150-200mm
• Country of Origin: India
• Brand Name: VISION EXIM
• Grade: 6101 / 1050 / 1060
• Condition: Annealed / As Formed
• Conductor Material: Aluminium
• Machine Type: Extrusion
• Surface Treatment: Bare / Electro-plated
• Temper: Custom

In order to maintain high-quality standards in our offerings, we make use of the finest grade raw material. Also, we ensure that the material is sourced from the reliable places only. We keep the globally accepted packaging guidelines in consideration so that the products that we deliver are packed well and are safe from the external environmental factors such as shock, compression, temperature.

Analog pH sensor, specially designed for Arduino controllers is easy to use and can be used as a plug and play solution to measure pH value of a solution without any additional circuit required. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ?). For most hobbyist this great accuracy range and it’s low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. With a simple program to ready analog voltage, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage. Build your own PH meter gadget, or a water monitoring station for your water tanks. This and our other water sensor devices could make for the ultimate water control device. Use it for your aquaponics or fish tanks or other materials that need measurements. Applications: Water quality testing Aquaculture Specification: Module Power : 5.00V Module Size : 43 x 32mm(1.69×1.26″) Measuring Range :0 – 14PH Measuring Temperature: 0 – 60 ? Accuracy : ± 0.1pH (25 ?) Response Time : ? 1min pH Sensor with BNC Connector pH2.0 Interface ( 3 foot patch ) Gain Adjustment Potentiometer Power Indicator LED Need to measure water quality and other parameters but haven’t got any low cost pH meter? Find it difficult to use with Arduino? Our analog pH meter, specially designed for Arduino controllers and has convenient and practical connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ?). For most hobbyist this great accuracy range and it’s low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage.

• Brand: Zaral
• IP Rating: IP44
• Material: Mild Steel
• Voltage: 415 V
• Width: 750 mm
• Height: 1900 mm
• Depth: 500 mm

TBEA has ability design, manufacturing, sales and service of oil-immersed high-voltage current transformer, inductive voltage transformer, combination transformer, current transformer with SF6 gas insulation, and capacity voltage transformer. The voltage scope of products is from 35KV up to 765KV. The total annual production capacity of products of various voltage grades is up to 5,000 sets.

• Material: Metal
• Shape: Rectangle, Square
• Application: Industries, Power House
• Color: White
• Feature: Dust Proof, Excellent Reliabiale
• Condition: New

We are among the prominent Manufacturers and Suppliers of Metal Boxes. The Metal Boxes are available in various sizes. Metal Sheets of different thicknesses are used to manufacture Metal Boxes of different weights. These Metal Boxes are highly durable. They are corrosion-resistant and strong. Customers can avail the Metal Boxes from us at reasonable prices. Highlights Easy storage and carriage of materialsLight-weightDurableCost-effective. Sizes Available (In Inch) 19 X 19 X 3616 X 17 X 2515 X 15 X 1913 X 13 X 2112 X 12 X 18

• Material: GI
• GI Type: Hot Dip
• Height: Upto 5 Meter
• Sheet Thickness: 3.2 mm

"In the automotive sector, commitment to quality - On time production and delivery of injection molding plastic components and supply are key factors."We are one of the well-established and quality centric companyengaged in this sector for manufacturing & supplying unmatched quality Automotive Plastic Parts such as Plastic Cable Grip, fuel sensor housing, Plastic Knobs, Indicator Parts and other Vehicles Plastic Parts. Our range of Automotive Plastic Products are manufactured from superior raw materials using latest technology and modern machines. These products are also made as per specific needs of customers and demand forecasting market research.We are perfectly positioned to manufacture any high volume requirements. Over the years we have manufactured a variety of injection molds for leading names in automotive market.

Panel Accessories – Lugs, Channel, Cable Gland, Rubber Gasket Profile, Cable Tie, Door Lock, Handle, Busbar Support, Insulators, etc

Fresh Coconut, Disposable Gloves, disposable medical examination gloves

ALUMINIUM BUS BAR

Solar Panel, Monocrystalline Solar PV Panel, 375 Watt Loom Solar Panel

As a renowned manufacturer and supplier, we offer motor control center to our valued customers at reasonable prices.

electric motor drive, Hydraulic Cylinder, Hydraulic Power Packs, Jacks

wireless sensors, inclination sensor, Temperature Sensors, image sensors

electronic composite panel board, acrylic board, Number Plate, radium board