Laboratory Glass Components Dealers in Vadodara

• PORE SIZE: 90-150 Microns
• POROSITY GRADE: G1

Goel introduce Sintered Glassware of a porous glass disc as a filter media mainly used for the filtration of liquids,gases,gas washing,dispersion and absorption.

• Size: 142 mm & 293 mm

The membrane holders in combination with membrane filters are used for sterile filtration of pharmaceutical and biological solutions. These holders are available in various sizes to hold different sizes of diameter membrane filters. All the holders are provided with air vent valves and the filter support screen is provided with Teflon Silicon ‘O’-ring. A flow deflector is provided under the top plate for even distribution of the liquid flow. A back, pressure support screen may also be supplied as on optional accessory to protect the filter against reverse accidental flows.

• Material: Borosilicate Glass

Over - GLR Glass Assemblies are used for a general purpose distillation process which is to be operated at atmospheric pressure or vacuum. Vapours from the Glass Lined Reactor (GLR) rise through the column and enter into condensers. Condensed Material then after gets either refluxed back or collected into a receiver flask. This type of unit is consisting of adaptor plate, bellow with flange, column sections, Heat Exchangers, Pipe line components, vent valves, reflux line, receiver flask and drain valve. This unit is available for GL Reactors of capacity 500Ltr. to 3000Ltr. These Glass Assemblies can be designed as per the Clients' requirements.

• Type: VIEW GLASS
• Brand Name: KABIR
• Certification: ISO 9000-2001
• Model Number: TMVG-09
• Place of Origin: VADODARA

We are a reputed manufacturer and supplier of Tank Mounted View Glass Assembly based in Vadodara, Gujarat, India. We supply a wide range of Tank Mounted View Glass Assembly as per the customers requirements. We supply high rated units of ANSI 150#, ANSI 300# and ANSI 600# where the material certification is furnished with all the units. The maximum operating temperature of the assembly is 200° C and the maximum pressure that it can sustain is 25Kg/cm.   Details : “Kabir”Manufactures Industrial Sight Glass Assembly for various mounting options such as Weld Pad type according to requirement, ANSI Flange OR Plain Pad type, Weld Neck Flange type. Other mounting options are available as per the requirement “Kabir”make Sight Glasses of Weld Pad types are designed to be welded on the Vessel or Tank. The lower weld pad flange is available in many alloys and is 150# rated standard, higher rated units are available. Cover plate flanges used in the manufacturing of our sight glasses are from ASME Section VIII acceptable materials. The lower weld pad can be provided with a cylindrical or spherical curve to match the vessel or tank, eliminating the need for special nozzles and expensive saddles. Special configurations are always available to meet customer requirements “Kabir”make Sight Glasses of ANSI Flanged type are Bolt-on units designed for attachment to ANSI flanged nozzles or vessel studding outlets. The lower flange is a standard ANSI 150# Raised Face flange. Higher rated units are also available. (300# and 600#). Material certification is furnished with all the units “Kabir” make Sight Glasses of Weld Neck Flange type are weld neck units designed to be welded on to pipe ends or into tanks or vessels. The lower flange is a standard ANSI 150# weld neck flange. Higher rated units are also available. (300# and 600#). Material certification is furnished with all the units.    Features : Temperature Ratings : Maximum Operating Temperature rating is 200oC Connections : Flanged OR Socket Weld OR Butt Weld OR Weld Pad OR Weld Neck Flanged End Connection Pressure Ratings : Maximum Pressure rating is 25 Kg / Cm2 Sizes : From 15 NB to 300 NB Pad Flange : M.S, C.S. (A–105), S.S.304, S.S.316, or any other alloy. Cover Flange : M.S, C.S. (A–105), S.S.304, S.S.316, or any other alloy. Window : Toughened Borosilicate Glass. Fasteners : SS316 or SS304 or SA 193 Gr.B7 Gasket : CAF or PTFE.

• Material: Borosilicate Glass
• Size: 24/1000
• Brand Name: Ablaze

All column sections are supplied complete with support. The packing must be ordered separately. On special request column sections can be supplied without the packing support. Column sections and pipe sections may be used for the construction of columns of all nominal bores provided that the weight of the packing and retained liquid does not exceed the load-bearing capacity of the support. Column section can also be provided with a thermometer branch below the packing support.

• Voltage: 220 V
• Material of Construction: Metal
• Power Source: Electric
• Automatic Grade: Semi Automatic
• Frequency: 50 Hz
• Max Pressure: 3-6 Kg

Glass Lined Reactors are used instead of glass reactors especially when the scale of operation is large and relatively high pressure steam is to be used as heating media. GLR is very common in API, Fine chemicals and chemical Industry Quite often assemblies like Simple Distillation Unit, Reaction Distillation Unit, and Fractional Distillation Unit etc. are installed above glass lined reactors. The basic features of these assemblies remain the same but glass shell and tube heat exchanger is preferred due to the large scale of operation   Glass Assembly Set up changes with process requirements like Batch /Continuous Size of GLR Requirement of Azeotropic distillation Site constraints Process Requirements Instrumentation and Automation requirements   You are requested to give following details to furnish you offer GLR Size Available total height area Operating Pressure

• Material: Glass
• Thickness: 10-20mm
• Pattern: Plain
• Width: 2-4M
• Feature: Excellent Finishing, Extra Stronger, Light Weight
• Ground Clearance: 20-40mm
• MOQ: As per requirement

Advantages : Fine finish Corrosion resistant Durable Wide choice of capacities Heat resistant Slip resistant   Applications: Pharmaceuticals Environmental Testing Contract Labs Forensics Chemical Petrochemical Process Clinical Research Bioanalysisv

We are efficiently meeting the requirements of various scientific experiments by offering a wide range of Laboratory Glass Components. These dimensionally accurate components are able to withstand extreme heat & harsh chemicals and do not break easily. We manufacture the following Glass Components : Pipeline Components :• Spacer• PTFE Spacer• Pipe Section• Equal Tee• Unequal Tee• Reducer• Bend Reducer• Bend• Bend with Thermometer Branch• U Bend with Bottom Outlet• U Bend• Y Piece• Unequal Cross• Cross• Hose Connector• Closure• Bend Hose Connector• Thermometer Pocket for Bend• Jacketed Pipe Sectiono Glass Jacketo Metal JacketColumn Components:• Column Section with Thermometer Branch• Column Section• Support Plate Assembly• Column Packing – Ranching Ring• Column Feed Pipe• Column Feed Sparger• Spray Feed Section• Spray Feed Pipe (Ting Type)• Packing Support• PTFE Perforated Plate• Column Adaptor (Flat Top)• Reflux Divider  

We are a renowned Manufacturer and Supplier of Borosilicate Glass Pipeline Components from India. Our range of Borosilicate Glass Pipeline Components is known for its qualitative features. These Borosilicate Glass Pipeline Components are used in the chemical, pharmaceutical and allied industries.Features : Resistant to corrosion Long service life Minimum maintenance Transparent design Easy to clean Range : Pipe Sections Spacers Concentric Reducers 10o Bends 45o Bends 80o Bends 90o Bends 90o Bends Reducers U Bends U Bends with Bottom Outlet 90o Bends with Thermometer Branch Y - Pieces Closures Equal Crosses Unequal Crosses Hose Connectors Equal Tee Unequal Tee

GMP Model S.S. 316 Quality suitable for filtration of sterile liquids TWO silicon gaskets & support screen Size: 142 & 293 model With bubble test arrangement

glass column components, Glass Pilot Plant, rotary evaporators, Bioreactor

• Color: Transparent
• Material: Borosilicate Glass
• Application: Chemical Laboratory
• Capacity: 1 KL to 5 KL
• Usage/Application: Chemical Industries

Glass Stirring Assembly, Borosilicate Glassware

In many operations like reaction, extraction & absorption, the transparency of glass is particular advantage. For such process a range of glass column components are available in Borosilicate glass

Column Glass Components, borosilicate glass, GLASS BELL JARS

Kjeldahl Glass Assembly, Glass Vessels with Flange

Glass Distillation Assembly, Lined Flush Bottom Valve, Lined Globe Valve

Column Glass Components, 90 MA Single-package Marine Cooling Units

glass components, Column Components, Cylindrical Vessels

glass assembly, lids

glass components, glass heat exchangers, Mobile Gas Absorbers

Sight Glass Assembly, bakelite, PTFE Gasket, Mechanical Seal

Column Glass Components, glass units, Glass Vessels and Stirrers

Laboratory Glass Component, Glass Heat Exchanger

glass column components, glass heat exchangers, Fluorescent Tube Light Tube