Level Indicator Dealers in Gidc Industrial Area, Vadodara

• Application: LIQUID
• Material: SS304
• Country of Origin: India
• CC Distance: 300

NRG GLOBAL INSTRUMENTS MAKE TUBULAR LEVEL INDICATOR The Indicator is fitted between two end blocks through gland packings. The indicator is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of Tie-rods for 360 visibility or C- channels around the gauge to protect it from accidental blows. Glass removal for replacement possible w/o dismantling the gauge. 100% PTFE bush as packing to ensure positive leak tightness for full vacuum as well as 6 kg/cm service pressure. It is available in single length of 2000mm c/c distance. We can extend the length by coupling 2 or more through coupler. We are providing Air Vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve or offset constructed isolation valve on request. The connection provided will be Flanged/Screwed/TC joint.

• Brand Name: Kabir
• Material: MS/SS/PP
• Display: Analog
• Condition: New
• Pay Mode Terms: T/T (Bank Transfer)

• Brand Name: Flowtech Instruments Services

We are offering float & board type level indicator description : flowtech offer float & board type tank level gauge (indicator) suitable for large non – pressurized liquid storage tanks / vessels. The specific gravity of the fluid should be more than 0.6. Float is available in different material s.s.304/s.s.316/p.p./teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through rope via a sets of pulleys, the pointer slides over a cm marked board, installed parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted. design feature : “flowtech” also offers vapour seal type float & board type level gauge which is generally used for tanks having corrosive fumes / vapours or n­2 [nitrogen] purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed s.s. Pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level. performance : float inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position. material of construction : float : s.s.316 / s.s.304 / poly propylene float wire & float guide wire : s.s.316 / poly propylene pulley & pulley pin : m.s. / s.s.304 pulley housing : aluminium / s.s.304 / s.s.316 die cast weather proof enclosure of weather proof board (scale) : aluminium with powder coated having 150 mm width & white back ground & black writing at every 10cm and red marking at every meter. Anchor plate : m.s / s.s.304 / s.s.316 scale bracket (t) : m.s. / s.s.304 pointer : m.s / s.s.304 with pp roller for frictionless sliding on board. Available : from 1 metre to 20 metre

• Color: Yellow
• Item model number: 022A
• Dimensions: 9.25 x 2.63 x 5.06 inches; 15.52 Ounces

We offer the Level Indicator, which is a self-contained cage designed for use with our top mounting level transmitters or switches. The Level Indicator, which we offer, is constructed using high-grade material that adds and a wide selection of configurations make this cage an ideal means of utilizing the power of our many technologies without mounting directly into the process vessel. Technical Specifications : MOC : SS 316L / SS 316 / SS 304 / BrassProcess Connection : Flange End #150 / #300Vent / Drain : ½ NPT(F), ¾ NPT(F)Dish End : 2�,3� ,4�Gasket : As per RequirementCertification : Corrosion Test - ASTM A262, Prac E/ IBR

We offer our customers, Oil Level Indicators which is used in the greasing/ oil system and gear to see the lubricating oil levels in the concerned equipment. Magnetic gauge of these is made using quality raw material, ensuring accurate measurement of the oil level. With the help of our professionals, we are also able to custom design our range as per the specifications of our eminent customers. sigma constant oil lavel indicator consists of a borosilicate glass  dome with suitable alluminim alloy base /carbon steel/stain less steel and elbow to fit your equipment. borosilicate glass has the advantage of extraordinary impact strength,excellent clarity and good temperature range ie upto 250*c   moc : Alluminium /carbon steel/satin less steel (ss 304/316).conn : 1/4' bsp (m) with lock nut bowl : Boro silicatecapacity : 250 ml

Simple principle of mechanics and magnetism harnessed to offer an absolutely safe, reliable and trustworthy level indicator for dangerous and toxic liquids under high pressure and temperature. As the liquid level rises in the tank, the float is lifted up due to buoyancy. The float carries a stem attached to it and on the other side of the stem a magnet is fixed. The float stem moves inside an SS enclosure. External to this enclosure is a glass tube, which carries the magnetic Capsule Design (Red & Black Colour) OR Rotating Roller Design. Due to magnetic attraction, the magnet on the float stem and the magnetic follower are coupled and move in union. As the float moves along with the liquid, the Capsule also moves inside the glass tube, and the position of the follower can be read against the scale.

We are experienced Magnetic Level Indicator Manufacturer In India. We preffered as Magnetic Level Indicator manufacturer in India. These Level Indicators are flanged to the tank for indicating level of liquids and liquefied gases in open or closed tanks. These can be used in high temperature and pressure applications or if sight glasses and similar indicating glass parts cannot be used for safety reasons. This instrument is preferred because there is a safe pressure and gas tight separation between measuring and indicating parts. Thus the MAGNETIC LEVEL INDICATOR is suitable for a wide range of applications for the chemicals, pharmaceutical industries, petrochemical industries, refineries, oil and fuel tanks etc.The cage is flanged to the tank & the level is indicated on a Strip which consists of magnetic bi-colour rollers. The floats are available in various metallurgies like SS316, Titanium, PVDF, Polypropylene and PVC.   Used for high temp and pr applications or if glass parts cannot be used for safety reasons. Applications in Chemicals, Pharmaceutical, petrochemical, refineries, oil and fuel tanks etc. Available in side and top mounting versions Capsule Indicator in glass tube or magnetic bi-colour rollers SS 304, SS 316, PTFE, PP, PVC & PVDF Float & Cage Material Max. C.C. Distance: 5000 mm, greater lengths on request. Flanged connection drilled to ASA 150# or other on demand Pr 20 Kg/cm2 for SS & 3 Kg/cm2 for PP, PVC & PVDF, Higher Pr rating on demand Temp 450oC for SS, 80oC for PVDF, 60oC for PVC, 50oC (Max) for PP Specific Gravity : Min 0.5 AI/SS etched scale in cm +/- 5 mm accuracy These models consists of Red or Black/white magnetic rollers equipped with small rod magnets which are rotated one after another at an angle of 180º by the magnetic field of the permanent magnet put inside the float. The rollers change from white to red on rising level and red to white on falling level. Plastic rollers are suitable for liquid temperature upto 100ºC & Alluminium rollers for temperature upto 250ºC and ceramic rollers for temperature upto 450ºC.The level in a tank or agitating machine is permanently indicated as a Red or Black column even in the case of power failure.In addition, Level Sensing elements can be fixed directly to the float cage, so that-simultaneous, contact less sensing is measured electrically. Electronic Level Indicator with set point can be connected with the sensor to have reading in remote. Single or double set point relays can also be provided in the Electronic Indicatorfor control purposes.  

Product Specification   FULLY AUTOMATIC WATER LEVEL INDICATOR USING MAGNET SENSORS. Indicates five levels of the tank. Each level can be indicated in percentage or can be re-callibrated in 'liters' or in 'feet'. MAGNET SENSOR MEANS MOST ADVANCE TECHNOLOGY : MAGNET SENSORS  USED TO CHECK THE LEVEL OF WATER ARE SHOCK PROOF, RUST FREE & THERE IS NO POSSIBILITY OF SALT DEPOSITION ON  IT. ............MOST USEFUL FOR LARGE TANKS OF TOWNSHIP OR SOCIETY OR MUNICIPAL CORPORATION........

Our Float & Board Type Level Indicator, is listed among the must have Tank Level Indicators available in the market because of its unique construction designs. Ideally suited for fluid with specific gravity of 0.6, our Float & Board Type Level Indicator, has been very popular among our clients. Material of Construction : S.S.304S.S.316 P.P.Teflon Working : Works upon the specific gravity of the liquid principlePointer is connected to a pointer through Rope via a Sets of Pulleys Design Features : Offers vapor Seal Type float & Board type level GaugeThe float is connected to a magnetized counter weight moving in a sealed S.S. pipeMagnetized bi - colour capsule inside a glass tube to indicate liquid level Widely used for : Tanks having corrosive fumes / vapors OR N 2 [Nitrogen]Purging tanks Specifications FloatS.S.316 / S.S.304 / Poly PropyleneFloat Wire & Float Guide WireS.S.316 / Poly Propylene Pulley & Pulley Pin M.S. / S.S.304Pulley HousingAluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather ProofBoard (Scale)Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CMAnchor PlateM.S / S.S.304 / S.S.316Scale Bracket (T)M.S. / S.S.304PointerM.S / S.S.304 with PP Roller for Frictionless Sliding On Board.AvailableFrom 1 Metre to 20 Metre

• Country of Origin: Made in India
• Material: MS,SS 304,SS 316,PP,PVDF
• Item Code: TLG-15-01
• Phase: single
• I Deal In: New Only
• Construction: C- Channel,Tie Road
• Glass Material and Size: Borosilicate tube in OD of 12,16,19 and 25mm
• Maximum Pressure And Temp: 10 Kg/cm2 and 100 Deg C
• Wetted Part Material: CS,ASTM A 105,SS 304,SS 316L
• Usage/Application: Industrial
• Brand: PETROTECH
• Type: Glass

Float devices use the buoyancy of a float to indicate the liquid level in the tank. The chain is attached to a counterweight which indicates the level as the float moves up and down. These types of devices are often found on atmospheric storage tanks in OEMS, Petroleum & Pharmacy Industry and the specific gravity of the fluid should be more than 0.6 like oil tanks, large Acid tanks and the storage tanks of storage tanks of Oil, Fire / DM water Alkalis, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc. Flowtech is the leading manufacturer of float & Board level indicators in India and supplies its products to not just all major states of India but many overseas countries as well. The float we design as per the specific gravity of the liquid, floating on the liquid levels. The float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 meter height of the tank, we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted. Salient Features Of The Float & Board Level Indicators By Flowtech Are: Flowtech float & Board level indicators are available in different materials S.S.304/S.S.316/P.P./Teflon etc. Flowtech offers vapor Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes/vapors OR N­2 [Nitrogen] Purging tanks. The float is connected to a magnetized counterweight moving in a sealed S.S. pipe & which drives a follower magnetized bicolor capsule inside a glass tube to indicate liquid level. The pointer of the level indicator moves on a 150 mm width aluminum powder coated scale. Vapors seals (Magnetic) for special applications like HCl, N2 purged tank, dilute alkalis, dilute HNO3, NH3 Methanol, Benzene, Toluene, IPA etc. In vapor seal, there are no sealing liquids so we get absolute vapor tightness.

Tank Level Indicator, Glass Tube Rotameter, glass tube flow meters

liquid level indicators, Acrylic Body Rotameters, orifice flange assembly

Side mounted heavy duty tank level indicator are suitable for storage tanks, batch tank, day tank, receiver tank. It is simple & reliable devices for direct reading in atmospheric or pressurised tank application.

knob type level indicators, Ball Valves, Pneumatic Control Valves