Liquid Level Indicator Dealers in Gidc Industrial Area, Vadodara

• Brand Name: NRG
• Material: Steel
• Color: Black
• Condition: New
• Automatic Grade: Automatic
• Certification: ISI Certified
• Display Type: Analog
• Guage Size: 2inch
• Type: Tank Level Indicators
• Accuracy: 2
• Country of Origin: India
• Measuring Range: 900-1000mm

• Level Indicator: Level Gauge
• Level Indicator: Level Gauge

We are offering tubular level indicator. Kabir” manufactures tubular level indicator (side mounted) with tie rod design, with scale or without scale, with or without inbuilt valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc. :- 1. the top & bottom liquid chamber of indicator is made of solid bar & glass tube (borosilicate) is fully protected by box section made out of 2 mm thick m.s. Channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. we are using 100% ptfe (teflon) rope as packing to ensure positive leak tightness for full vacuum as well as 6 kg cm² service pressure. 3. as compare to reflex & transparent type level gauge, this tubular level indicator is light in weight. 4. it is available in single length of 2000 mm cc distance. We can extend the length by coupling 2 or more through coupler. 5. we are providing air vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve on request. 6. it is simple and reliable device for direct reading in atmospheric or pressurized (below 5 kgcm2) tank application. 7. it eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous chemicals start leaking. 8. glass tube (borosilicate boiler quality) is fully protected by guard rods or box section made of 'c' – channel. 9. offset constructed isolation valve on request. 10. the connection provided will be flanged screwed tc joint.

• Brand Name: Flowtech Instruments Services

Float & board type level indicator, tank level indicator float type description : flowtech offer float & board type tank level gauge (indicator) suitable for large non – pressurized liquid storage tanks / vessels. The specific gravity of the fluid should be more than 0.6. Float is available in different material s.s.304/s.s.316/p.p./teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through rope via a sets of pulleys, the pointer slides over a cm marked board, installed parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted. design feature : “flowtech” also offers vapour seal type float & board type level gauge which is generally used for tanks having corrosive fumes / vapours or n­2 [nitrogen] purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed s.s. Pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level. performance : float inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position. material of construction : float : s.s.316 / s.s.304 / poly propylene float wire & float guide wire : s.s.316 / poly propylene pulley & pulley pin : m.s. / s.s.304 pulley housing : aluminium / s.s.304 / s.s.316 die cast weather proof enclosure of weather proof board (scale) : aluminium with powder coated having 150 mm width & white back ground & black writing at every 10cm and red marking at every meter. Anchor plate : m.s / s.s.304 / s.s.316 scale bracket (t) : m.s. / s.s.304 pointer : m.s / s.s.304 with pp roller for frictionless sliding on board. Available : from 1 metre to 20 metre

Measures minimum, maximum and real time values of sound levels (noise levels). Maximum hold updating and display facility is also provided. In maximum hold updating mode, previous maximum value of the sound is displayed and the same remains unchanged until a higher value is detected. Choice of A and C weighting modes is provided. In A weighting mode, -8928 response matches the frequency spectrum of the human ear. A weighting response is useful for OSHA regulatory testing, environmental measurements, work place design, low enforcements etc. In C weighting mode, -8928 response matches the flat frequency spectrum with no increase or decrease of amplitude over the frequency spectrum. C weighting response is useful for sound level analysis of engines and machinery. Fast and slow response modes are provided to suit different applications and standards. RANGE, RESOLUTION AND ACCURACY 40dB to 130dB in 4 ranges of 40dB to 70dB, 60dB to 90dB, 80dB to 110dB, 100dB to 130dB. Choice of manual or automatic range selection is available. Resolution of dB measurement is 0.1dB. Accuracy is within ± 2dB.

We provide specially designed Tubular Level Indicator, which is a simple and reliable devie for direct reading of pressure of atmospheric or pressurized tanks. Designed in such a way that it doesn’t have any problems associated with conventional gauge glass cock, our Tubular Level Indicator has been termed as the best available in the market. Design Features : Solid bar & Glass Tube (Borosilicate) construction top and bottom liquid chamberMild Steel protection box for the glass chamber100% PTFE (TEFLON) rope as packinglight in weight compared to other optionsAvailable in single length of 2000 mm C/C DistanceBest for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application. Material of Construction : Scale : Aluminum / Acrylic / SSLiquid Chamber (End Fitting) : P.P / C.S. / S.S.304 / S.S.316 / MS with PP or Teflon Lined.Protection Guard : MS, SS-304, SS-316, PP

product specification   water level audio indicator, level sensing by magnet sensor * pump man is a audio indicator of water level. It is used where only manual control of water pump is intended. Here level sensing is achieved by most advance magnet sensor. It gives led indication along with a buzzer sound when water tank gets empty and also when it gets full. * a switch is provided with which one can select "buzzer when tank is full" or "buzzer when tank is empty". * it informs you to turn the pump on (when empty) or turn the pump off (when full). magnet sensor means most advance technology : magnet sensors  used to check the level of water are shock proof, rust free & there is no possibility of salt deposition on  it.

Float devices use the buoyancy of a float to indicate the liquid level in the tank. The chain is attached to a counterweight which indicates the level as the float moves up and down. These types of devices are often found on atmospheric storage tanks in OEMS, Petroleum & Pharmacy Industry and the specific gravity of the fluid should be more than 0.6 like oil tanks, large Acid tanks and the storage tanks of storage tanks of Oil, Fire / DM water Alkalis, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc. Flowtech is the leading manufacturer of float & Board level indicators in India and supplies its products to not just all major states of India but many overseas countries as well. The float we design as per the specific gravity of the liquid, floating on the liquid levels. The float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 meter height of the tank, we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted. Salient Features Of The Float & Board Level Indicators By Flowtech Are: Flowtech float & Board level indicators are available in different materials S.S.304/S.S.316/P.P./Teflon etc. Flowtech offers vapor Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes/vapors OR N­2 [Nitrogen] Purging tanks. The float is connected to a magnetized counterweight moving in a sealed S.S. pipe & which drives a follower magnetized bicolor capsule inside a glass tube to indicate liquid level. The pointer of the level indicator moves on a 150 mm width aluminum powder coated scale. Vapors seals (Magnetic) for special applications like HCl, N2 purged tank, dilute alkalis, dilute HNO3, NH3 Methanol, Benzene, Toluene, IPA etc. In vapor seal, there are no sealing liquids so we get absolute vapor tightness.

• Country of Origin: Made in India
• Material: MS,SS 304,SS 316,PP,PVDF
• Item Code: TLG-15
• Construction: C- Channel,Tie Road
• Glass Material and Size: Borosilicate tube in OD of 12,16,19 and 25mm
• Maximum Pressure And Temp: 10 Kg/cm2 and 100 Deg C
• Wetted Part Material: CS,ASTM A 105,SS 304,SS 316L
• Model Name/Number: TLG-15
• Usage/Application: Industrial
• Brand: PETROTECH

The "KiT" make tubular Level Indicator (Side Mounted) .It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc.

It is a simple, accurate , maintenance free & reliable float operated technique adopted for tank gauging in large Non pressurized storage tank where to get a level within 1" or 2" of liquid level is satisfactory and provides the additional convenience of being able to read out at 100 or 200 ft. away from the tank.

Tank Level Indicator, Glass Tube Rotameter, glass tube flow meters

liquid level indicators, Acrylic Body Rotameters, orifice flange assembly

sound levelmeters, gas leak detectors, earthing relay units, Anemometers