Liquid Level Indicator Dealers in Makarpura, Vadodara

We are offering tubular level indicator. flowtech make heavy duty tubular liquid level indicator is a simple & reliable device for direct reading in atmospheric or pressurized tank application. These indicators eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous damage surrounding equipments & also endanger human life. 1. the top & bottom liquid chamber of indicator is made of solid bar & glass tube (borosilicate) is fully protected by box section made out of 2 mm thick m.s. Channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. .we are using 100% ptfe (teflon) rope as packing to ensure positive leak tightness for full vacuum as well as 6 kg / cm service pressure. 3. as compare to reflex & transparent type level gauge, this tubular level indicator is light in weight. 4. it is available in single length of 2000 mm c/c distance. We can extend the length by coupling 2 or more through coupler. 5. we are providing air vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve on request. 6. it is simple and reliable device for direct reading in atmospheric or pressurized (below 5 kg/cm2) tank application. 7. it eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous chemicals start leaking. 8. glass tube (borosilicate boiler quality) is fully protected by guard rods or box section made of 'c' – channel. 9. offset constructed isolation valve on request. 10. the connection provided will be flanged / screwed / tc joint.

Measures minimum, maximum and real time values of sound levels (noise levels). Maximum hold updating and display facility is also provided. In maximum hold updating mode, previous maximum value of the sound is displayed and the same remains unchanged until a higher value is detected. Choice of A and C weighting modes is provided. In A weighting mode, -8928 response matches the frequency spectrum of the human ear. A weighting response is useful for OSHA regulatory testing, environmental measurements, work place design, low enforcements etc. In C weighting mode, -8928 response matches the flat frequency spectrum with no increase or decrease of amplitude over the frequency spectrum. C weighting response is useful for sound level analysis of engines and machinery. Fast and slow response modes are provided to suit different applications and standards. RANGE, RESOLUTION AND ACCURACY 40dB to 130dB in 4 ranges of 40dB to 70dB, 60dB to 90dB, 80dB to 110dB, 100dB to 130dB. Choice of manual or automatic range selection is available. Resolution of dB measurement is 0.1dB. Accuracy is within ± 2dB.

• Application: LIQUID
• Material: SS304
• Country of Origin: India
• CC Distance: 300

NRG GLOBAL INSTRUMENTS MAKE TUBULAR LEVEL INDICATOR The Indicator is fitted between two end blocks through gland packings. The indicator is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of Tie-rods for 360 visibility or C- channels around the gauge to protect it from accidental blows. Glass removal for replacement possible w/o dismantling the gauge. 100% PTFE bush as packing to ensure positive leak tightness for full vacuum as well as 6 kg/cm service pressure. It is available in single length of 2000mm c/c distance. We can extend the length by coupling 2 or more through coupler. We are providing Air Vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve or offset constructed isolation valve on request. The connection provided will be Flanged/Screwed/TC joint.

• Application: Laboratory
• Item Code: SMLI
• Payment Terms: T/T (Bank Transfer)/Other
• Brand Name: Kabir
• Model: Side reflex
• Environmental temperature: -40
• Working temperature: -40-250 C

Heavy Duty Tubular Liquid Level Indicator is a simple & reliable device used for direct Reading in atmospheric or pressurized tank application. It has wide application for level measurement in process tanks, batching tanks, vessels etc. Flowtech is a Private Ltd. Co. Registered under Indian Companies Act 2013 with Experienced R & D Department, Large Product Line and Good Financial Position & TQM along with ERP system to ensure best in class products and services to it's not just domestic but International customers too. Flowtech Is A Leading Tubular Level Indicator Supplier Flowtech manufacture IS standardized tubular level indicator in all sizes from ½” to 3” and in the range of C/C 4 meters. Backed with expertise and profound knowledge in this field, we are counted among the foremost manufacturers, suppliers, and exporters of Tubular Level Indicator. We use PTFE (TEFLON) rope as packing to ensure full vacuum even at high pressure and Glass Tube (Borosilicate Boiler Quality) is fully protected with the box section or guard rods. We have also adopted ERP system for our Marketing, Stores & Purchase Department and Tally system for our Accounts & Finance Department.

We provide specially designed Tubular Level Indicator, which is a simple and reliable devie for direct reading of pressure of atmospheric or pressurized tanks. Designed in such a way that it doesn’t have any problems associated with conventional gauge glass cock, our Tubular Level Indicator has been termed as the best available in the market. Design Features : Solid bar & Glass Tube (Borosilicate) construction top and bottom liquid chamberMild Steel protection box for the glass chamber100% PTFE (TEFLON) rope as packinglight in weight compared to other optionsAvailable in single length of 2000 mm C/C DistanceBest for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application. Material of Construction : Scale : Aluminum / Acrylic / SSLiquid Chamber (End Fitting) : P.P / C.S. / S.S.304 / S.S.316 / MS with PP or Teflon Lined.Protection Guard : MS, SS-304, SS-316, PP

• Country of Origin: Made in India
• Material: MS,SS 304,SS 316,PP,PVDF
• Item Code: TLG-15-01
• Phase: single
• I Deal In: New Only
• Construction: C- Channel,Tie Road
• Glass Material and Size: Borosilicate tube in OD of 12,16,19 and 25mm
• Maximum Pressure And Temp: 10 Kg/cm2 and 100 Deg C
• Wetted Part Material: CS,ASTM A 105,SS 304,SS 316L
• Usage/Application: Industrial
• Brand: PETROTECH
• Type: Glass

product specification   water level audio indicator, level sensing by magnet sensor * pump man is a audio indicator of water level. It is used where only manual control of water pump is intended. Here level sensing is achieved by most advance magnet sensor. It gives led indication along with a buzzer sound when water tank gets empty and also when it gets full. * a switch is provided with which one can select "buzzer when tank is full" or "buzzer when tank is empty". * it informs you to turn the pump on (when empty) or turn the pump off (when full). magnet sensor means most advance technology : magnet sensors  used to check the level of water are shock proof, rust free & there is no possibility of salt deposition on  it.

The "KiT" make tubular Level Indicator (Side Mounted) .It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc.

It is a simple, accurate , maintenance free & reliable float operated technique adopted for tank gauging in large Non pressurized storage tank where to get a level within 1" or 2" of liquid level is satisfactory and provides the additional convenience of being able to read out at 100 or 200 ft. away from the tank.

liquid level indicators, Acrylic Body Rotameters, orifice flange assembly

Tank Level Indicator, Glass Tube Rotameter, glass tube flow meters

sound levelmeters, gas leak detectors, earthing relay units, Anemometers