Liquid Level Indicator Dealers in Vadodara

• Application: LIQUID
• Material: SS304
• Country of Origin: India
• CC Distance: 300

NRG GLOBAL INSTRUMENTS MAKE TUBULAR LEVEL INDICATOR The Indicator is fitted between two end blocks through gland packings. The indicator is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of Tie-rods for 360 visibility or C- channels around the gauge to protect it from accidental blows. Glass removal for replacement possible w/o dismantling the gauge. 100% PTFE bush as packing to ensure positive leak tightness for full vacuum as well as 6 kg/cm service pressure. It is available in single length of 2000mm c/c distance. We can extend the length by coupling 2 or more through coupler. We are providing Air Vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve or offset constructed isolation valve on request. The connection provided will be Flanged/Screwed/TC joint.

• Brand Name: Flowtech Instruments Services

Flowtech make heavy duty tubular liquid level indicator, water tank level indicator is a simple & reliable device for direct reading in atmospheric or pressurized tank application. These indicators eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous damage surrounding equipments & also endanger human life. 1. the top & bottom liquid chamber of indicator is made of solid bar & glass tube (borosilicate) is fully protected by box section made out of 2 mm thick m.s. Channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. .we are using 100% ptfe (teflon) rope as packing to ensure positive leak tightness for full vacuum as well as 6 kg / cm service pressure. 3. as compare to reflex & transparent type level gauge, this tubular level indicator is light in weight. 4. it is available in single length of 2000 mm c/c distance. We can extend the length by coupling 2 or more through coupler. 5. we are providing air vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve on request. 6. it is simple and reliable device for direct reading in atmospheric or pressurized (below 5 kg/cm2) tank application. 7. it eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous chemicals start leaking. 8. glass tube (borosilicate boiler quality) is fully protected by guard rods or box section made of 'c' – channel. 9. offset constructed isolation valve on request. the connection provided will be flanged / screwed / tc joint.

• Level Indicator: Level Gauge
• Level Indicator: Level Gauge

We are offering tubular level indicator. Kabir” manufactures tubular level indicator (side mounted) with tie rod design, with scale or without scale, with or without inbuilt valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc. :- 1. the top & bottom liquid chamber of indicator is made of solid bar & glass tube (borosilicate) is fully protected by box section made out of 2 mm thick m.s. Channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. we are using 100% ptfe (teflon) rope as packing to ensure positive leak tightness for full vacuum as well as 6 kg cm² service pressure. 3. as compare to reflex & transparent type level gauge, this tubular level indicator is light in weight. 4. it is available in single length of 2000 mm cc distance. We can extend the length by coupling 2 or more through coupler. 5. we are providing air vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve on request. 6. it is simple and reliable device for direct reading in atmospheric or pressurized (below 5 kgcm2) tank application. 7. it eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous chemicals start leaking. 8. glass tube (borosilicate boiler quality) is fully protected by guard rods or box section made of 'c' – channel. 9. offset constructed isolation valve on request. 10. the connection provided will be flanged screwed tc joint.

• Accuracy: ±0.2%F.S.
• Output Units: MWCL, PSI, kPa
• Display: Measured Parameter – Date
• Real Time Clock: Provided.
• Data Storage: 512 K EEPROM.
• Power Supply: 12V SMF

DescriptionDigital Water Level Recorder (DWLR) which can be used in piezometer wells as well as tubewells for measurement of water level data. Non-contact devices in Water level measurement are the next generation products in the water sector. Statometer uses an indigenously designed patented signal processing algorithms of acoustic waves for accurate measurements.Ideal solution for Real-time measurement of fluctuations in water table Central Ground Water Board(CGWB) NOC compliances Determining efficiency of rain water harvesting systems Planning crops and drought forecasting in agriculture

• Material: SS
• Application: Industrial
• Country of Origin: Made in India
• Brand Name: Flowtech
• Item Code: FBLI-65
• Fluid Type: Liquid
• Model: FBLI-0913
• Material Grade: SS304

• Country of Origin: India
• Type: Dwlr telemetry
• Brand Name: Vishal krushi kendra
• Material: Cast Iron
• Color: Grey Blue
• Voltage: 220V
• Operating Type: Automatic
• Power: 12 To 24 VDC Or VAC
• Driven Type: Electric
• Display: Digital
• Warrenty: 1 Year
• Finishing: Powder Coated
• Corrosion Resistance: Yes
• Shape: Rectangular
• Phase: Single Phase
• Usage: Residential, Industrial, Laboratory, Chemical Flow Measurement, Water And Chemicals, Hospital, Clinic
• Specialities: Spiral Water Meter, Multi Jet, Lorawan Compatible, Digital Water Meter Display, Accuracy
• Line Size: 4-20mm, 20-50mm, 50-100mm, 100-150mm
• Packaging Type: Carton Box, Wooden Box, Metal Sheet Box
• Pressure: Low Pressure, Medium Pressure, High Pressure
• Weight: 50-100kg
• Dimension (LxWxH): 365x180x295mm

• Type: Floor Stone Tiles, Wall Stone Tiles
• Application: Flooring, Wall
• Feature: Attractive Look, Durable, Easy To Fit, Perfect Shape

MATERIAL--High-strength PP material and high-quality stainless steel, It is not easy to be damaged if stepped on by mistake. PRODUCT CONTAINS--1 forehand and backhand wrenches, 50 tile levelers, and 50 1.5mm steel pins. 50 0.9mm replacement spare needles! REMOVABLE ASSEMBLY-The steel needle can be disassembled, Which is convenient for replacement, No extra money is needed! Wrenches installed on both sides, Flexible use. ERGONMIC DESIGN--Break through the shortcomings of the traditional leveling device for one-time use, It can be reused, and there is no debris left in the tile gap! The tile leveling system can make your tile surface level, Even gaps, and higher efficiency!

Measures minimum, maximum and real time values of sound levels (noise levels). Maximum hold updating and display facility is also provided. In maximum hold updating mode, previous maximum value of the sound is displayed and the same remains unchanged until a higher value is detected. Choice of A and C weighting modes is provided. In A weighting mode, -8928 response matches the frequency spectrum of the human ear. A weighting response is useful for OSHA regulatory testing, environmental measurements, work place design, low enforcements etc. In C weighting mode, -8928 response matches the flat frequency spectrum with no increase or decrease of amplitude over the frequency spectrum. C weighting response is useful for sound level analysis of engines and machinery. Fast and slow response modes are provided to suit different applications and standards. RANGE, RESOLUTION AND ACCURACY 40dB to 130dB in 4 ranges of 40dB to 70dB, 60dB to 90dB, 80dB to 110dB, 100dB to 130dB. Choice of manual or automatic range selection is available. Resolution of dB measurement is 0.1dB. Accuracy is within ± 2dB.

We are offering a wide range of Leveling Staff which are made of durable and light extruded aluminium sections, silver anodized and then imprinted with special weather resistant inks . Front side has 5mm graduations throughout full length. Reverse side is graduated in1mm for short range accurate measurements. Our range of leveling staff is appreciated by our clients for its sturdy construction, wind resistance and fine coating. Our range of leveling staff is customized as per the specifications of our clients. We manufacture a precision engineered range while making use of high grade raw material  Our Leveling Staff Telescopic in canvas cover are available in various Lengths – 4mt, 5mt, 6mt, 7mt & 8mt. High Quality Robust Aluminium Sections High Precision Staff when high accuracy is needed

The  Andon  alert  system  is  a  singling  system  that  allows  production  line  staff  to  signal  for assistance without having to leave their work station.  Any of four departments may be selected at a terminal station, which will in turn trigger a visual and audible indication at the Display Panel Up to 20 stations can communicate with the Display panel.  The Display Panel can also send an acknowledgement signal back to the originating station to let the operator know that assistance is  on  its  way. These functions  are  achieved  wirelessly,  via  a  low-power  VHF  radio  signal,removing the need for installing cables over a wide area within an assembly plant.         Benefits   Makes the state and condition of manufacturing processes easily accessible and very clear – to everyone. It helps the industry guide, monitor and ensure productivity. Andon boards double as early warning devices Andon boards can be use in manufacturing, inventory management, storage, receiving, picking and shipping.

• Country of Origin: Made in India
• Material: MS,SS 304,SS 316,PP,PVDF
• Item Code: TLG-15
• Construction: C- Channel,Tie Road
• Glass Material and Size: Borosilicate tube in OD of 12,16,19 and 25mm
• Maximum Pressure And Temp: 10 Kg/cm2 and 100 Deg C
• Wetted Part Material: CS,ASTM A 105,SS 304,SS 316L
• Model Name/Number: TLG-15
• Usage/Application: Industrial
• Brand: PETROTECH

• Brand Name: Meco
• Accuracy: +- 1.5dB (under reference conditions)
• Dimension: 172 x 56 x 39 mm (approx.)
• Weight: 144gms Including Battery (approx.)
• Model Name/Number: Mece 970P
• Display: Digital
• Measuring Range: 35dB
• Power Supply: 9V Battery
• Calibration: Automatic
• Resolution: 0.1 dB
• Functions: MAX / MIN / HOLD,Auto Power Off
• Accessories: Carrying Case, Inst. Manual, 9V Battery (installed)

We provide specially designed Tubular Level Indicator, which is a simple and reliable devie for direct reading of pressure of atmospheric or pressurized tanks. Designed in such a way that it doesn’t have any problems associated with conventional gauge glass cock, our Tubular Level Indicator has been termed as the best available in the market. Design Features : Solid bar & Glass Tube (Borosilicate) construction top and bottom liquid chamberMild Steel protection box for the glass chamber100% PTFE (TEFLON) rope as packinglight in weight compared to other optionsAvailable in single length of 2000 mm C/C DistanceBest for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application. Material of Construction : Scale : Aluminum / Acrylic / SSLiquid Chamber (End Fitting) : P.P / C.S. / S.S.304 / S.S.316 / MS with PP or Teflon Lined.Protection Guard : MS, SS-304, SS-316, PP

Product Specification   FULLY AUTOMATIC WATER LEVEL INDICATOR USING MAGNET SENSORS. Indicates five levels of the tank. Each level can be indicated in percentage or can be re-callibrated in 'liters' or in 'feet'. MAGNET SENSOR MEANS MOST ADVANCE TECHNOLOGY : MAGNET SENSORS  USED TO CHECK THE LEVEL OF WATER ARE SHOCK PROOF, RUST FREE & THERE IS NO POSSIBILITY OF SALT DEPOSITION ON  IT. ............MOST USEFUL FOR LARGE TANKS OF TOWNSHIP OR SOCIETY OR MUNICIPAL CORPORATION........

• Brand Name: Metravi
• Accuracy: 1.5 dB
• Model No: SL 4005
• Display: Digital
• Calibration: Automatic
• Resolution: 0.1 dB
• Measurement Range: 30-130 dB

Float devices use the buoyancy of a float to indicate the liquid level in the tank. The chain is attached to a counterweight which indicates the level as the float moves up and down. These types of devices are often found on atmospheric storage tanks in OEMS, Petroleum & Pharmacy Industry and the specific gravity of the fluid should be more than 0.6 like oil tanks, large Acid tanks and the storage tanks of storage tanks of Oil, Fire / DM water Alkalis, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc. Flowtech is the leading manufacturer of float & Board level indicators in India and supplies its products to not just all major states of India but many overseas countries as well. The float we design as per the specific gravity of the liquid, floating on the liquid levels. The float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 meter height of the tank, we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted. Salient Features Of The Float & Board Level Indicators By Flowtech Are: Flowtech float & Board level indicators are available in different materials S.S.304/S.S.316/P.P./Teflon etc. Flowtech offers vapor Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes/vapors OR N­2 [Nitrogen] Purging tanks. The float is connected to a magnetized counterweight moving in a sealed S.S. pipe & which drives a follower magnetized bicolor capsule inside a glass tube to indicate liquid level. The pointer of the level indicator moves on a 150 mm width aluminum powder coated scale. Vapors seals (Magnetic) for special applications like HCl, N2 purged tank, dilute alkalis, dilute HNO3, NH3 Methanol, Benzene, Toluene, IPA etc. In vapor seal, there are no sealing liquids so we get absolute vapor tightness.

The "KiT" make tubular Level Indicator (Side Mounted) .It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc.

• Output Signal: 4-20mA
• Accuracy: 0.1 %
• Compensated Temperature Range:: 0 to +70 deg C
• Vibration: 10 g
• Storage Temperature Range: -40 to +125 deg C
• Shock: 100 g

Drilling of Piezometers with proper designing as per CGWB-Central Ground Water Board norms and guidelines to know ground water behavior & aquifer characteristic of an area for better design of hydrological structure so that ground water can be recharged or withdraw without disturbing aquifer system & hydrological balance. (Pore Pressure Meter) is extensively used in groundwater monitoring to determine the level and flow pattern of groundwater. As per customer requirements, We can extend it to telemetry and nontelemetry.