Measuring Instruments Dealers in Vadodara

• Size: Multisizes
• Output: 4-20mA/HART/Relay/Batching/GSM/Data Logging
• Cable length: Up to 50 m / 164 ft
• Size :: 1” to 10”
• Accuracy :: ±2.5% to 3% of actual reading
• Gas Temperature :: Up to 70°C
• Power Supply :: 85 to 265 VAC @ 50Hz

DescriptionAllegiance Digital  Electromagnetic Water  Flow Meter, 80 mm (3 Inch) simply known as mag flow meter is a volumetric flow meter which is ideally used for waste water applications and other applications that experience low pressure drop and with appropriate liquid conductivity required.The device doesn’t have any moving parts and cannot work with hydrocarbons and distilled water. Mag flow meters are also easy to maintain.Magnetic flow meters works based on Faraday’s Law of Electromagnetic Induction. According to this principle, when a conductive medium passes through a magnetic field B, a voltage E is generated which is proportional to the velocity v of the medium, the density of the magnetic field and the length of the conductor.In a magnetic flow meter, a current is applied to wire coils mounted within or outside the meter body to generate a magnetic field. The liquid flowing through the pipe acts as the conductor and this induces a voltage which is proportional to the average flow velocity.This voltage is detected by sensing electrodes mounted in the Magflow meter body and sent to a transmitter which calculates the volumetric flow rate based on the pipe dimensions.Mathematically, we can state Faraday’s law asE is proportional to V x B x L[E is the voltage generated in a conductor, V is the velocity of the conductor, B is the magnetic field strength and L is the length of the conductor].It is very important that the liquid flow that is to be measured using the magnetic flow meter must be electrically conductive. The Faraday’s Law indicates that the signal voltage (E) is dependent on the average liquid velocity (V), the length of the conductor (D) and the magnetic field strength (B). The magnetic field will thus be established in the cross-section of the tube.Basically when the conductive liquid flows through the magnetic field, voltage is induced. To measure this generated voltage (which is proportional to the velocity of the flowing liquid), two stainless steel electrodes are used which are mounted opposite each other.The two electrodes which are placed inside the flow meter are then connected to an advanced electronic circuit that has the ability to process the signal. The processed signal is fed into the microprocessor that calculates the volumetric flow of the liquidPrinciple of Magnetic Flow Meter Based on Faraday’s LawAllegiance Water Management Electromagnetic Flow Meter Clamp On Ultrasonic Flow Meter S.S Electromagnetic Flow Meter Open Chenal Ultrasonic Flow Meter Vortex Flow Meter Instrumentation Tools Turbine Flow Meter by Membrane Key Digital water Flowmeter Telemetry Digital water Flowmeter Non Telemetry Digital water Flowmeter as per CGWA   Digital water Flowmeter

• Brand Name: Flowtech Instruments Services

We are offering glass tube rotameter, gas flow meter description : flowtech glass tube variable area flow meters (rotameters) are intended for general in line and by-pass metering applications (i.e. For gas & liquid) where operating conditions are with the limitations of glass metering tubes. These are the principle of variable area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The vertical position of the float as indicated by scale is the measure of the instantaneous flow rate. simplified piping and reduced space requirements. Permanent magnetic link between metering float and motion position transmitter. Precision swaged metering tube. Heavy duty welded float and guide construction. Guide cartridges easily removable for cleaning provide with electrical transmitter, flow indicator or alarm. accuracy : +/- 2% f.s.d. Repeatability : 0.5 % rangebility : 10:1 scale length : 180 degree angular pressure ratings : 40 bar temperature ratings : - 20º c to 250º c connections : flanged or screwed enclosure \ : ip 55 or ip 65 on request tube : 316ss, 316lss, 304ss, hastelloy ‘c”, titanium float : 316ss, 316lss, 304ss, hastelloy ‘c”, titanium indicator box : abs, cast al., ss end fitting : 316ss, 316lss, 304ss, hastelloy ‘c”, titanium “ mainly used for measuring rated flow of liquid and gases. Available in c.s, ss-304, ss-316 poly propelene.p.t.f.e. Lined. Flanged, screwed or hose connections. Available from 15 nb to 100 nb pipe size and ranges between 30 to 20,000 lph of water at ambient temperature. Linear scale having accuracy of 2% fsd. High & low flow switches.

• Model Number: Distance Meter (DM 20A)
• Brand Name: Metrix
• Laser Distance Meter (DM 20A): 2300

Ultra sonic distance meter (dm 20a) dm 20a ultra sonic distance meter 0.3-20m laser class 2 5 group data store metricimperial conversion.

URABLE AND ERGONOMIC: Made of 5mm aluminum alloy with durable metal knobs and bolts, It`s more durable and quality than plastic one.Say goodbye to your fragile angularizer template tool. ACCURATE ANGLE MEASUREMENT TOOL: This AMENITEE Universal Opening Locator is Laser engraved markings(inches & centimeters) perfect for precise and accurate angle measurements.With 4 adjustable, 2-sided arms, you can create a custom stencil for every job. Use it to mark tile, flooring, bricks, lumber, laminate, metal & more! MULTIPLE APPLICATIONS: Set at 90-degree angles to space parallel pieces of wood, form into a T-Square to align your brick, even set your own distances for corbelling, any other project you can think of. EASY TO USE: Just place the template tool ruler onto your work area, slide the rulers into the shape needed, and tighten the screws.The innovative, four-sided template tool can be used as a stencil for cutting your work piece.

• Brand Name: KABIR
• Temperature: 0 to 65 deg C
• Country of Origin: VADODARA
• Electronics Housing: Stainless Steel or die cast aluminium, flame proof
• Applications: Liquids including hazardous but non-corrosive medium
• Input Supply: 12V/24 V DC
• Analog output (Programmable): 4 – 20mA 20 – 4 mA 3) 0 – 20mA 4) 20 – 0 mA
• Mode: Distance OR height measurement
• LCD Screen: 8 x 2 alphanumeric displya, green or blue screen
• Communcation: RS 485 – Modbus
• Measuring range: Up to 30 mtr
• Resolution: 5mm or 10 mm depending on models
• Accuracy: 0.5% of FSD
• Updation time: 150 mS max
• Minimum distance: 300 mm
• Display Filter: None / Low / Medium / High
• Temperature compensation: Inbuilt
• Voltage Variations: Internal calibration and automatic compensation
• Process connections: 3 inch flange Threaded lock nut – Customised
• Electrical connections: PG 9 one gland, 2 numbers
• Sensor face: Anodised aluminium
• Sensor body: PVC

• Brand Name: Optima
• Weight: 500gm
• Resolution: +/-0.01 pH
• Display Type: LCD
• pH Range: 0.00 to 14.00
• No of Digits: 3.5 digit
• Dimension: 78x105x40mm

TH measures minimum, maximum and real time values of room temperature and humidity. TH also displays time in hours and minutes in 12 and 24 hours formats.Facility of daily alarm, alarm off and memory daily reset on/off are provided.

• Inputs ( & Display range ): Current, 4 – 20 mA DC/ 0 – 20 mA DC ( -1999 to 9999)
• Output accuracy: +/- 0.1% of span
• Input impedance: 200 KΩ for Voltage, mV & T/C inputs upto 250 ohms for current inputs
• Display accuracy: +/- 0.1% of span
• Alarms: Maximum 4 nos. of potential free contacts.

Pantech's Programmable Microprocessor based Indicator cum Controller, model 803 is an ideal instrument for providing indication as well as controlling set points to various processes in JUMBO SIZE DISPLAYS. It is designed to accept various process inputs ( Current, Voltage, RTD, Thermocouples, Resistances ) simultaneously i.e in UNIVERSAL manner or any one of these in PREDEFINED manner. When UNIVERSAL manner, The user can configure from the front keys only to select any one of the input automatically. The user can also configure to set the range of linear inputs or calibrate the instrument without openint it. The model 803 can give maximum 4 relay outputs. All the contact output related specs like – SETPOINT, ALARM TYPE, HYSTERISIS – can be configured easily by the front panel keys itself. Retransmission facility is of course provided with all possible configurations allowed by front keys as usual. The instrument can be optionally equipped with serial communication facility to operate on MODBUS RTU protocols. Single level password is there to keep the settings and configurations intact for the right user only.

• Brand Name: National Instrument India
• Warranty: 1 Year
• Type: Digital Grain Moisture Meter
• Moisture Range: 0% to 40%
• Display Type: Digital
• Accuracy: 0.2 %
• Model: DMM8_Cottonseed

• Brand Name: PRIMA
• Color: White
• Condition: New
• Type: Ambient Air Quality Monitoring Equipment
• Weight: 5 Kgs
• Country of Origin: India
• Power: Stabilized, 1Ø phase, 230V AC, 5Amps
• Accuracy: +2% at constant temperature
• Display: 20x4 Alphanumeric LCD with backlight
• Operating temperature: 0°C to + 50°C
• Enclosure: FRP, Weatherproof IP 65 level protected & UL Certified.
• Data Output: RS485 MODBUS RTU (with PRIMA DAMS)

Its range of voltage from 8 KV to 30 KV in 12 steps, allows you to set the voltage exactly to the level you desire for the coating you are inspecting, any pipe size from 2" to 60" whatever the coating may be somatic, tar, asphalt extruded coats, tapes or thin film epoxy coating. You have at your control the voltage setting that you require. One batteries and a universal charger are part of the package. More efficient circuitry means reduced current drain and prolonged battery life and cost saving. * Input supply      :  Operated by built-in single 6 V, 4AH battery*  Output Voltage  :  8 KV to 30 KV pulse type*  Size                 :  (W) 7" (L) 8.5" (H) 2.5"*  Weight             :  2.00 Kgs. with battery, approximately