Oxygen Gas Plant Dealers in Manjalpur, Vadodara

• Certification: CE Certified
• Weight: 100-1000kg
• Automatic Grade: Automatic
• Driven Type: Hydraulic
• Warranty: 1year

Hydrogen chloride is produced as a by-product or waste gas by a variety of processes like chlorination of Organic chemicals within the process industries. In many countries there are strict maximum emission levels for hydrogen chloride which mean that it must be removed from waste gas streams. This may be done simply by scrubbing it out of the waste gas, or where the quantities are large enough, by absorbing it to produce a hydrochloric acid product.   Hydrogen chloride has a great affinity for water and the absorption can be easily accomplished as long as a suitable method is found to contact the gas and the water. The absorption of hydrogen chloride into water causes a great deal of heat to be evolved which has to be removed from the system. The theoretical maximum concentration achievable is dependent on the temperature and the partial pressure of HCI in the exhaust gas entering the plant. The most appropriate HCI absorption process for any particular application depends on the nature of the feedstock and on the product required. The three basic types are batch-wise operated HCI scrubbers or continuously operated adiabatic and isothermal absorbers.   Hydrogen chloride and hydrochloric acid are very corrosive materials and will attack many materials of construction commonly used in the chemical process industries. Borosilicate glass is the ideal material of construction, being suitable for handling hydrogen chloride gas, hydrochloric acid, and any impurities present with the exception of hydrofluoric acid Hydrogen chloride eventually generated in reaction along with SO2, Unreacted chlorine or organic vapors.T o absorb Hydrogen chloride with such additional chemicals, need s different designs and required expertise   The Adiabatic absorber is the simplest form of HCl absorber, which can be operated continuously. Under the normal operating procedure, Adiabatic Hydrogen Chloride Absorber produces 30 % HCl. Adiabatic Absorber is a vertically mounted Packed Column. The standard configuration of the adiabatic absorber consists of a suitable Glass Packed Column with internals, coil type condenser & cooler with the necessary drain outlet for the acid. The Hydrogen Chloride Gas enters at the bottom of the column & Water flows from the top of the column & flows down through the column.   Heat generated by the dilution of Hydrochloric acid gas with water. It vaporizes @30% water and other non-soluble components of the gas stream. Condensed stream together with make up water is returned to the packed tower and discharged from the bottom of the column after cooling by cooling water.   Falling Film Absorber Capacity:10 Kg/hr to 900 Kg/Hr –Incoming 100%HCl gas Process Description Hydrogen Chloride gas is produced from the variety of process industries & mainly from chlorination operation. This must be scrubbed before venting to the atmosphere. Hydrogen chloride has a great affinity of water and easily absorbed in water. The absorption of Hydrogen Chloride gas in to water cause large amount of heat, due to exothermicity which has to be removed by means of suitable device. The remaining un-absorbed gas along with other inserts from the bottom of the absorber is entering in to Secondary Process water is circulated through Secondary Scrubber to absorb the HCl gas and form dilute acid. The advantage of providing Tail Scrubber is to get scrubbed Unscubbed 5% gases.. This dilute acid is circulated through Falling Film Absorber to absorb HCl gas as explained above.   Salient Features : High absorption efficiency. High acid concentration achievable. Safe Operation due to low isothermal temperature. Handle a wide range of gas loading with minimum liquid flow rates to maintain full tube wetting. Variation in Hydrogen Chloride Gas flow rates or Composition causes no operation problem.

Specification: • Gas Manifold for cylinder with M.S. Powder coated wall mounted bracket brass chrome plated block, 1 inlet and 2 outlets. Working  pressure 150kg. • Working pressure 225kg.  

• Range: 50 to 6000 NM3/hr
• Pressure: Upto 70 Bar

All the Vaporizers from 20 Nm3Hr to 6000 Nm3Hr as Single module are manufactured using aluminum material of different grades for different parts.For Structural Sections; Cryogas employs high strength Aluminum Alloys.

• Automation Grade: Automatic
• Voltage: 230V
• Normal operating temperature: 0-55°C
• Warm up time: 30 minutes

Vaporizer Air Heated Vaporizer Ambient air Vaporizer diesel Fired Vaporizer

ambient air atmospheric vaporizers, Herose GMBH Cryogenic Valves

Cryogenic Valves, liquid nitrogen storage tank, Safety Relief Valves

gas filling station, oil field equipment

Medical Gas Pipeline, Chamber Kilns, Epoxy Curing Oven, Diffusion furnaces

Aluminum Cryogenic Vaporizers, Single Stage Gas Regulator, Calibration Gases