Rotameters Dealers in Vadodara

“kabir” manufactures variable area flowmeters (rotameters) which are mainly used for liquid & gas applications for measurement of rate of flow indication. The float moves up & down in the tapered borosilicate glass tube with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The vertical position of the float as indicated by scale is the measure of the instantaneous flow rate. :- end fittings : - ms, cs, ss304, ss316, cf8m, cf8, c.i. Ptfe lined, c.i. Ss lined, pvc and any other desired material subject to its availability. Tube :- borosilicate glass. Float :- ss 316, ptfe and other on request. Packing :- neoprene, ptfe, silicon, viton. Frame & cover :- ms, optionally ss. :- accuracy :- +- 2% f.s.d. temperature ratings: - maximum operating temperature rating is 121 o c for gas services and 93o c for liquid services. Repeatability : - 0.5 % rangebility : - 10:1 connections : - flanged or screwed or triclover joint or hose nipple. enclosure : - ip 55 or ip 65 on request. Scale length : - 220 mm. Pressure ratings :-

We are offering rotameter. the simplest & most common flow meter is a fixed orifice in a pipeline. This orifice creates a pressure differential (i.e. Pressure drop) which is proportional to flow. But the flow rate versus differential pressure is a square root function, thus at the high end of the scale the graduations are far apart and very easy to read. At the low end of the scale, the graduations are so close together that reading becomes impossible. The net result is a meter with only a 3 or 4 to 1 usable range. the limited rangeability of this type of meter can be overcome by adding a bypass leg around the orifice, which has a pressure drop equal to the drop across the orifice and bypassed flow is directly proportional to the mainline flow. This results in a meter, which has a linear function and not a square root. Since the flow meter has a 10 to 1 range, the orifice meter will now have a 10 to 1 linear flow range, which is as easy to read at the bottom as the top of the scale. This principle can be used virtually any pipeline size, handling almost any flow rate and metering either liquid or gas. It is one of the most versatile meters available. Its only limitation is that the solid particles or slurries can clog the orifice and prevent proper operation. design features : dowel pin, side plate construction detachable flow scales externally adjustable packing glands connections can be rotated 360 degree at 90 degree laminated safety glass shielding scale length of 180-200 mm by-pass rotameters suitable for larger pipeline of 50 nb to 450 nb. The flowrate through the rotameters is proportional to the pressure drop across the orifice plate. Available in ss-316/ ss-304/p.p material. Accuracy=2% fsd. High & low flow switches on request.

• Size: 25 NB
• Material: Stainless Steel
• Application: Measuring
• Application: Industrial
• Color: Metallic
• Feature: Easy To Maintain
• Finishing: Polished

A Flow Rotameter is a device that measures the flow rate of liquid or gas in a closed tube. It is fabricated with transparent and unbreakable plastic body and scales. Moreover, Flow Rotameters consist of a panel, a tapered glass tube, both end bases, and four holding studs. They are easy to install and use. Our Flow Rotameters give accurate and reliable results. They are offered at cost effective prices.

• Brand Name: NRG
• Material: Glass
• Finishing: Polished
• Color: Transparent
• Application: Industrial
• Size: 25 NB
• Grade: SS316
• Feature: Online Installation
• Country of Origin: India
• MOQ: 1

VEKSLER (ABR-19) LOW VOLUME ACRYLIC BODY ROTAMETER is designed for general non-corrosive applications and are more economical than the PR-19. The tapered metering tube is integrally machined in the solid acrylic block and the direct reading scale is engraved on the body. It incorporates all the features of PR-19 except that it cannot be used for corrosive application and for temperature above 60 Deg C. Flow range available is upto 2000 LPM for air gas and 2 LPM for water.

Acrylic Body Rotameter is essentially used in general in-line applications that involve gases and liquids. The design of the Acrylic Body Rotameter is made as per global standards and tested thoroughly to rule out any defects. Principle : Fluid flow takes place from bottom to top in the tapered Acrylic body Tube where the float moves up and down freely. The position where the float weight and buoyancy forces are balanced in proportion to flow rate is the place where the float positions itself. The instantaneous flow rate is measured by the Vertical position of the float, shown by the scale. Attributes : Tube made up of solid Acrylic blockPacking glands are externally adjustableResistant to abrasionRotated connections : 360o at 90oScale length : 180-200 mm Performance Accuracy +/- 2% F.S.D.Temperature Ratings Maximum Operating Temperature rating is 50 o CRepeatability0.5 %ConnectionsFlanged OR Screwed OR Triclover Joint OR Hose Nipple Rangebility 10:1Scale length180-200 mm

By Pass Rotameter suitable for the most economical provides a solution for measuring large rates of flow & suitable in pipelines from 40 NB to 350 NB. Available in variety of materials carrier ring impulse piping and the flow rate through the rotameter as a flow indicator with volumetric

Rotameters are general purpose, Direct reading, Relatively simple instruments, Recommended for universal use, where a reliable sensitive repeatable indication of instantaneous flow rate is required for process control, Or other purposes. This type of instrument consists of essentially a vertical mounted, tapered, calibrated glass tube with a float inside it. Sensewell make Rotameters are designed to meet the needs of modern chemical and allied industries, pilot plants & laboratories, where rate of flow of liquid or gas inside a pipe line or tubing is to be measured with a certain degree of accuracy. Suitable for inline installation with flanged or screwed connections with several options mounting of material for the Wetted parts. Available in line sizes from ½" to 3" NB

Flowtech manufacture IS standardized By-pass Rotameter in various sizes up to 24” and 1000M3/Hr range which are suitable for flow rate measurement in 2'' NB or for higher pipe sizes. The instrument is simple in construction and reliable for flow rate indication. Also flowtech has adopted best ERP solution to ensure flawless manufacturing and supplies to all major states of India and even overseas. The complete assembly consists of carrier rings/flanged taps, bypass line and a Rotameter as an indicator. The orifice plate dimension is based on BS/ISO- 5167 specification. Flowtech has Experienced R & D Department, Large Product Line and Good Financial Position & TQM along with ERP system to ensure best in class products and services to its not just domestic but International customers too. Flowtech manufacture most economical, low cost and easy to maintain rotameters engraved with all the standard features. We use various options for material of construction of wetted parts for tolerating extreme conditions. Two tone powders coated excellent finishing with thread less, leakage less, corrosion free heavy duty design.

• Connection: Flanged,Screwed
• Accuracy: -+2% F.S.D.
• Repeatability: 0.5 %
• Enclosure: IP 55,IP 65 on request
• Pipe Size: 15 NB to 100 NB
• Flow Range: 30 to 20,000 LPH
• Model Name/Number: ROTA-150
• Brand: Petrotech
• Usage/Application: Industrial
• Tube Body Construction: ABS, Cast Al, SS, Etc
• Float Material: Teflon
• Temperature Ratings: - 20 to 250 Deg C

• Brand Name: Flowtech
• Application: Industrial
• Float Material: SS / TEFLON
• Tube Body Construction: Glass
• Model Name/Number: FMIPL-GTRM-108
• Model: GTR-0825
• Scale Angel: 180 Deg Angular
• Pressure Ratings: 10 Bar
• Accuracy: - 2% F.S.D

Model no: ACRYLIC BODY ROTAMETER (SERIES-SF-ABR-206) Suitable for online installation with flanged or screwed connection with several option of material for the wetted part. Available Sizes : 15 NB to 100 NB Ranges : • 2.5 to 40,000 LPH of water at temperature upto 50 degree • 0.1 to 1000 Nm³hr of air.

Acrylic Body Rotameters, orifice flange assembly, Magnetic Level Switches

By pass rotameter suitable for the most economical provides a solution for measuring large rates of flow & suitable in pipelines from 40 NB to 350 NB.

Metal Tube Rotameter, oil meter, positive displacement flow meters

Rotameter, Water Meter, Ultrasonic Flowmeter, Oil Flowmeter

Rotameter, Industrial Valves Pipe Fittings, Pipe Clamp, Trolley Wheel

Rotameter, Pneumatic Differential Pressure Transmitters

Purge Rotameter, Float and Board Type Level Indicator, Orifice Plate Assembly

Glass Tube Rotameter, Tank Level Indicator, glass tube flow meters

Rotameters, magnetic type level gauge, flow transmitters

Rotameters, Digital Temperature Scanner, Reverse Osmosis Plant