Rotary Actuators Dealers in Vadodara

We are offering double acting rotary actuator features : - double rack & pinion construction - hard anodized body providing high corrosion resistance - the pinion is supported on a large area of ployacetal bearings - maximum working pressure 8 bar - additional lubrication is not required - life more than 1 million cycles - anti blow-out pinion.

Ideal for line size above 50 NBCompact and light constructionTight shut off available for longer seat life, with the end stroke adjustment of the ActuatorSuitable typically for 3 way valves, requiring ON-OFF operation. It is availablein both Single Acting (spring return) or Double Acting versionsThe Single Acting 180° Actuator can provide centre off for the 3 way ball valve,bottom entry by choosing theoption, of 3 positionIt can be converted to 3 position 0 – 90° – 180° Actuator for 3 way valves usingROTEX Limit Switch and NAMUR valve type 30138The end stop adjustment is provided for opening and closing direction as a standardActuator mounting is as per ISO 5211 and accessories to NAMUR180° Actuator has 50% of torque value, of that of 90°Actuator

‘Flowell’ offers complete range of Double Acting and fail safe Single Acting Spring Return Actuators. These can be used for automation of quarter turn valves such as Ball, Butterfly, Plug Valves, dampers and other parts requiring 90 Degree Actuation.   Rack & Pinion Design with Anti Blow out Proof Pinion Both Double Acting and Spring Return Fail Safe Actuator available. Hard Anodised Aluminum Body. Pinion Made of Nickle plated alloy steel. Trouble Free Life for more than 5,00,000 Operations Double acting can be converted to Single Acting by just adding Springs. Actuator Factory Lubricated for Normal Life. Actuator Sizing for Inlet Air Supply from 2.5 Bar to 8 Bar. Standard Temperature Range -20 oC to 80 oC. Can also be supplied with Viton Seals for temperature 150oC Namur Mountings for mounting of Solenoid Valve, Limit Switch ISO Drilling Suitable for Direct Mounting on ISO Pad CCW As shown in the Figure CCW the compressed air is given from the Port A, the left and right plungers move reversely, the output pinion rotates counter-clockwise, and the air at the sides of the both plungers exhausts from B.   CW As shown in the Figure CCW the compressed air is given from the Port B, the left and right plungers move to the center, the output pinion rotates clockwise, and the air between the two plungers exhausts from A.   2. Travel Adjustment Have adjustment range of ±5°for the rotation at 0°and 90°

• Type: Double Rack & Pinion
• Pressure: 5 to 10 BAR
• Model: ARM
• Design: ISO 5211
• Actuator: Single / Double Acting
• Mounting: Numur
• Rotation Angle: 90°
• Body: Aluminium Hard Anodized
• Seals: Nitrile / Buna - N
• Temprature: -20 °C & 90 °C
• Torque: Upto 160Nm at 6 kg/cm2 (Pneumetic pressure)

rotary actuator, Solenoid Valve, Pneumatic Actuator, Pulse jet valve

rotary actuator, Manual Lug Type Butterfly Valve, Solenoid Valve

Rotary Actuators, rubber lined globe valve, ptfe lined fittings