Safety Valve Dealers in Vadodara

• Country of Origin: India
• Size: 1/2inch
• Type: Safety Valves
• Material: Steel, Metal
• Application: Oil Fitting, Water Fitting, Steam
• Feature: Durable
• End Connection: Flanged, Screwed
• Brand Name: AIRA
• Condition: New
• Pressure: High, Low, Medium
• Media: Water, Oil, Steam
• Temperature Of Media: Upto 300degree C

• safety Valve: Pressure Safety Valve

• Material: Metal
• Size: 5inch, 7inch
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pattern: Plain
• Automatic Grade: Automatic, Manual
• Pressure: 3-30 Psig
• Feature: Casting Approved, Light Weight

One of the most critical automatic safety devices in a pressure system is the pressure safety valve. The primary purpose of a pressure safety valve is the protection of life, property and environment during an over-pressure event in a pressurized vessel or equipment. An over-pressure event refers to any condition which would cause pressure in a vessel or system to increase beyond the specified design pressure or maximum allowable working pressure. A pressure safety valve is designed to open and relieve excess pressure from vessels or equipment and to re-close and prevent the further release of fluid after normal conditions have been restored.

• Product Description:: Straight / Angle Type
• Body Material:: GM
• Type of Seat & Disc: Integrated Seat/ Renewable Disc
• Trim Material: CU Alloy
• End Details: Screwed Female BSP Parallel/ Flange BS:10 Table F (Undrilled)
• Application: Water/Oil/Steam/Air
• Working Pressure: Max. 150 PSIG

• Country of Origin: India
• Type: Gas Safety Valve
• Material: Metal
• Color: Available In Many Colors
• Feature: Durable
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Pattern: Plain

• Type: Open Discharge Type / Enclosed Discharge Type / Angle Type / Straight Type / POP Type
• End Connection: Screwed End / Flanged End
• Disc: Bronze / Renewable Disc
• Operator: Hand Lever Operated
• Body (MOC): Bronze (Gun Metal) / Cast Iron / Cast Carbon Steel / SG Iron / Stainless Steel (SS304, SS316)
• Pressure Rating: PN-16 / Class-150 / Class 300
• IBR / Non-IBR: IBR / Non-IBR

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve, which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

• Design Standard: : API 526 / ASME Section VIII
• Inspection & Testing Standard: : API 527
• Dimensions: : API 520 / 521
• End Connection: : Flanged End to ANSI B 16.5, Class 150 / 300 / 600
•  : : BS 10 Table D / E / F / H
•  : : PN 6 / PN 10 / PN 16 / PN 25 / PN 40 / PN 64
•  : : DIN Standard / JIS Standard / IS Standard
•  : : Screwed – Threaded End to ANSI B 1.20.1
• Manufacuring Size Range: : 1/2″ x 3/4″ (DN15 x DN20) to 6″ x 8″”(DN 150 x DN200)
• Pressure Rating of Valve: : 150# / 300# / 600#
•  : : PN 10 / PN 16 / PN 25 / PN 40 / PN 64
• Design: : Full Lift, Spring Loaded
• Discharge: : Angle Type
• Bonnet Type: : Open / Close
• Cap Type: : Close / Fork-Lever / Packed Lever

• Brand Name: HEROSE,
• Size: 1/2,

Design, mfg. & tested as per api, 520, 521, 526, 527 standards models comply to "asme sec.viii" of boiler & pressure vessels code. Registered under indian boiler regulation (ibr). Also approved by chief controller of explosives department(ccoe) conventional balance bellows design. Complete teflon® (feppfa). Lining for highly corrosive services. Soft—seat arrangement for tight shut-off.

• Body: CF8 / CF8M
• Size Range: 1.1/2” To 4”
• Washer: Brass & CF8
• Diaphragm: Viton & NBR
• Sealing Spacer: Viton
• Plug Bolt: S.S.304
• Spring Cover: CF8 / CF8M
• Press Adj. Range: 1˜ 6 kg/ cm2  4 ˜ 10 kg / cm2  20 ˜ 35 kg / cm2
• Temprature: 85° C to 220° C
• Ends: Screwed / Flanged

• Material: Cast Iron, Ductile Iron
• Size: 20 - 150 mm
• Connection: Flanged
• Max. Operating Temperature: 200/220/400 Degree C
• Max. Operating Pressure: 13/22/40 Barg

• Material: BRASS /SS
• Size: 2\" NPT, 1.5\" NPT
• Country of Origin: Made in India
• Features: Genuine material used,Better service life,Resistance against corrosion
• Usage/Application: FOR GAS TANKS FOR LPG, PROPANE, AMMONIA,EO, PROPYLELE AND OTHER SUCH GASES

With the assistance of skilled and dedicated professionals, we bring forth extensive range of Safety Valve. Wide ranges of corrosion resistant coils are available in various shapes, length and thickness. Our quality experts analyze the quality from the initial stage and continue the checking till the final delivery. Additionally, we also offer the customized products as per the requirement at specification given by the clients.   Features   Long service life Smooth surface Anti corrosion

• Brand Name: Safeal
• Valve Size: 2 Inch
• Material: Cast Iron
• Country of Origin: Made in India
• Usage/Application: Water
• Pressure: 15 Bar
• Temperature Range: Up to 450 Degree C

• Material: Stainless Steel
• Packaging Type: Box
• Country of Origin: Made in India
• Brand Name: A ONE
• Valve Size: 3/4x1 Inch
• Pressure: High Pressure
• Usage/Application: Air

By releasing the excess pressure Paarth Safety Valves act as best Safeguards against probable damages of equipments, vessels, pipelines and other pressure systems.   Paarth Safety Valves are useful in varieties of fluids viz. corrosive, flammable, hazardous, toxic and others   Paarth Safety Valves are designed for different pressure conditions from 1 kg/cm2 to 600 kg/cm2     Paarth Safety Valves are manufactured in many different combinations of materials like Brass, Stainless Steel, PTFE and others.

hose safety valves, Fire Extinguishers, Gun Metal, Safety Items

We are well known for manufacturing of good quality Safety Relief Valves.