Sensors Dealers in Akota, Vadodara

• Brand Name: Sensinova
• Color: Withe
• Usage/Application: Energy Saving
• Min Time Delay: 10sec+-3sec To 12min+-1min (Adjustable)
• Power Consumption: 110-130v/Ac 220-240v/Ac
• Rated Load: 500w (110-130v/Ac) 800w (220-240v/Ac)
• Feature: Passive Infrared Senswitch

• Input Voltage: 120 to 260v AC
• Output: up to 100 Watt
• Detection Area: 180° / 360° Degree
• Delay Time: 30 to 50 sec

tiny 30 (economical series only on/off) low cost microwave motion sensor  can be easily connect to any led load up to 100 watt  turns off light if no mation detected after 30 sec,  can be connected to any light/ luminaire  slim design easy to fit in any light fixture / por  do not work during day time  installation height : wp to 3.5 mtr   .

We also Deal in Speed Breakers , Breath Alcohol Analyzer, Solar Blinkers, Delineator (With /Without Pole), Manhole/Jumbo/Median , Portable Barricade, Metal Delineator, Safety Cones, Safety Chain, Queue Manager Barricades, Modular Barrier, Spring Post, Flexi Post, Pillar Guards, Convex Mirrors, Bollards, Crash Barrier, Road /Park /Solar Stud, Traffic Baton, Reflective Jackets, Signage, Caution Sign ,Solar Traffic Signage, Solar Street Light, Speed Limit Indicator & Wheel Stopper & Wall Guard.

• Brand Name: Pantech
• Model Name/Number: 901
• Excitation Voltage: +5 V DC

• Power supply: 24 V DC ( 22.5 to 28 ) V DC from two wire loop

Pantech Instrument’s Model 902 is an extended version to its predecessor model 901. Model 902 is a Humidity Transmitter + RTD sensing element. The Sensing + Transmitter circuits not only senses the %RH value , but also does convert it into 2-wire 4-20 mA DC signal, for use of the higher instrumentation or controlling layers. The load capacity of this 4-20 mA DC signal is 600 ohms. Model 902 series is often ideally suited for low drain, battery operated systems. The basic HUMIDITY sensor inside the probe gives quality RH ( Relative humidity ) sensing performance in a competitively priced package. The RH sensor is a laser trimmed, thermoset polymer capacitive sensing element with on-chip integrated signal conditioning. The sensing element’s and transmitter PCB’s multilayer construction provides excellent resistance to most application hazards such as wetting, dust, dirt, oils and common environmental chemicals. For TEMPERATURE measurement, a miniature but high quality RTD is installed inside the basic sensor. The model is a fully configurable one, microprocessor based type. The model incorporates low drift operational amplifiers and industrial grade componenets. Burn in of each module ensures a long trouble free operation

• Weight: 6.6lb
• Packaging Type: Box
• Connector Distal: Medex Abbott Connector
• Hose Color: Hose Color
• Hose Length: 20 +130 + 150 cm

• Brand Name: Respironics
• Parameters: EtCO2
• Usage: Hospital
• Body Material: Plastic
• Model Name/Number: LoFlo
• Main stream or Side Stream: Side Stream LoFlo
• Interface: Multipara Monitor with EtCO2 compatibility

Measurement Methods:Semiconductor Sensor High Molecular Electrostatic Capacity Sensor. Measurement Ranges:0 to 90% RH (No Condensation)20 to 80oC - 4 to 176o F (with sensor Extension Cable) 0 to 100%RH(with Sensor Extension Cable, No Condensation)     

• Type: Photoelectric Sensor
• Brand Name: ABB
• Material: PVDF
• Voltage: 200VDC
• Application: Security And Protection
• Frequency: 50HZ, 60Hz
• Power: 0-5Amp
• Certificate: ISO 9001:2008 Certified
• Hole Diameter: 0-20mm

wireless motion detector, Access Control System, Biometric System

• Temperature Range: -200 to 600 deg C
• Cable Length: 3 M
• Application: Industrial
• Probe Material: Stainless Steel
•  :  
•  :  

Pressure Meters, Temperature Gauges, temperature meters, thermocouples gauges

Knock Sensor, Radiator, Mudguard, motor cycle, Axle, Handle bar

wireless motion detector, CCTV Camera, Access Control Reader

Light Data Logger, Acceleration Data Logger, Vibration Data Logger

motion detectors, access control card reader, attendance recorder