Sensors Dealers in Makarpura, Vadodara

• Material: Stainless Steel
• Brand Name: Heatbird
• Power Source: Electric
• Application: Plastic Industry, Packaging Industry, Extrusion, Medical, Food Processing
• Conductor Type: Copper
• Color: Silver
• Thermocouple Type: J-Type

• Country of Origin: India
• Type: Print Mark Sensor
• Material: Metal
• Application: Print Marking
• Weight: 0-300gm

We are offering Outstanding color contrast sensitivity • 25 microsecond sensing response (20,000 operations per second) • Reliably detects the toughest color mark contrasts, including 20% yellow against white • Totally solid-state: no bulbs to replace and no need to switch between different colored light sources • Rugged aluminium-zinc alloy die-cast housing with high-quality glass lens suitable for food processing applications; rated • Fixed-convergent sensing at 10 ±3 mm (0.39 ±0.12 inch); rectangular sensing image measures 1.2 mm x 3.8 mm (0.05" x 0.15") at 10 mm from the lens • 10 to 30V dc operation; all models offer both NPN and PNP digital outputs • Choose models with either horizontal or vertical sensing image • 3 meter (6.5') connector cable Spec. : supply 10-30 VDC Out Put : NPN & PNP both Setting by teach switch, Press “B” fore background & “M” for mark

• Country of Origin: Made in India
• Brand Name: AMEE
• Application: Industrial
• Features: Robustness, Rust proof, High strength

• Model Number/Name: MM 70 / MMT 162
• Usage/Application: Measure Moisture in Transformer Oil
• Brand: Vaisala
• Measuring Range: 0 100 PPM
• Warranty: 1 Year

• Application: Industrial Use
• Certification: CE Certified
• Color: Black, Silver
• Voltage: 220V
• Power Source: Battery, Electric
• Feature: Light Weight

Types Pt10 / Pt46 / Pt50 / Pt100 / Pt 200 / Pt500 /pt1000, Cu- 53, Cu-2000 in Simplex / Duplex / Triplex  Version in  Wire Wounded or Film Type with 2/3/4 Wire  Configuration   Calibration As per Din / Jis / Gost/ American Standard in  Standard or Special Tolerances   Sheaths Copper / Ss304 / Ss316 / Ss321 Etc.   Sheath Dia From 1 Mm to 8 Mm.or Any other Diameter.open Elements with Extension Leads are also Offered.   Insulation Mineral Insulated (mi) or Beaded or with Teflon/fiber Glass / Silicon Rubber Insulation.   Termination Head – Weather Proof to Ip 65/ Flame Proof Suitable for Cable Groups I, Ii A, Ii B or Ii C with Single, Double Entry in Cast Aluminium/cast Iron /ss, with or Without Cabe Gland. Seal Pot with Flying Leads. Seal Pot with Male / Female Connectors. Ceramic Terminal Block with Ss Base Plate. SS Base Plate with Flying Leads for Mounting Temperature Transmitters   Specials Surface Rtds, Skin Rtds, Multipoint Rtds,Rtds, with Bayonet Lock, Type Fitting All Rtds are Subjected to Test as per Quality Control Plan and are Supplied with the Calibration Certificates. Special Tests like Self Heating Test, Response Time Test, Non – Seismic/seismic Vibration Tests and Test as per Customer’s Requirement Can Be Carried Out At Extra Cost. Custom Made Rtds for Special Application is Our Speciality

• Country of Origin: India
• Application: Industrial
• Feature: Long Life, High Quality, Compact Size
• Condition: New
• Packaging Type: Carton
• Warranty: 1 Yr

• Brand: Pepperl + Fuchs
• Part Number: NBB20-L2-A2-V1
• Sensing Distance: 20 mm
• Output Type: PNP
• Supply Voltage: 10 to 30 V DC
• Switching Frequency: 0- 440 Hz
• Hysteresis: Typ. 5 %
• Usage/Application: Industrial
• Connection Type: Connector M12
• Number of Wires: 4 Wire
• Body Material: Polyamide
• Body Style: Rectangular
• Installation: Flush
• Degree of Protection: IP69K
• Operating Temperature: -25 to 85 Deg C

• Intrinsically safe • Weather Proof enclosure, IP67 • P&F flat type inductive proximity Sensors (EEx ia) • Up to Maximum 2 Sensor Elements • Aluminium Diecast, with powder coating, for superior corrosion resistance • Shatterproof polycarbonate Dome • Easily settable colour coded cam • The locked serrated settings cams, ensures the secured setting against any vibration • Special PCB eliminates all wiring from the switch element to the terminals. Complete protection against short circuit. • Three cable entries provided as a standard • Cable entries M20 X 1.5, 1/2” NPT • Complies to NAMUR Mounting standards • Solenoid termination inside the switch box is possible • Proximity switches are available in NAMUR and NO/ NC type • The customer can choose any flat V3 proximity switch • Additional mounting hole is threaded as per the UNC series • Range of Mounting Accessories having compatibility with various Actuator manufactures available • Stainless Steel bracket available as an option • Switch box conforms to UL508, UL file no. E249752 • Temperature range -20 °C to +80 °C On request -40 °C to +120 °C, -60 °C to +80 °C • IP67 : Water, Rain and Dust Proof • IP68 : Upto 100m on request

• Aluminium Diecast, with powder coating for superior corrosion resistance • Shatterproof polycarbonate Dome • Easily settable colour coded cam • P&F cylindrical inductive proximity Sensors (EEx ia) • The proximity switches are available in NAMUR and NO/ NC type • Customer can choose proximity switch from wide choice • Three cable entries provided are standard • Cable entries M20X1.5, 1/2” NPT • Complies to NAMUR Mounting standards • Additional mounting Accessories have compatibility with various Actuator manufacturers available • Stainless Steel bracket available as an option • Switch box conforms to UL508, UL file no. E249752 • Temperature range -20 °C to +80 °C On request -40 °C to +120 °C, -60 °C to +80 °C • IP67 : Water, Rain and Dust Proof • IP68 : Upto 100m on request • Special proximity switch can be installed on request

Product Specification   MAGNET SENSOR USED TO CHECK THE LEVEL OF WATER ARE SHOCK PROOF, RUST FREE &  NO POSSIBILITY OF SALT DEPOSITION ON IT. Hence it gives extra ordinary high working life & that is why it is called most advanced level sensing technique. These sensors are expoxy moulded which makes them fully isolated electriclly from water which makes them shock proof. Moreover, electrical isolation will prevent any electrolysis of water. Hence there will be no salt deposition over them. Rust free property is acheived by plastic / stainless steel material used for it's contruction. Types of Magnet Sensors : 1. Single level Plastic : Made using PP plastic and PVC wires. Used for water or any kind of liquid which do not react with plastic. Works well up to 60 degree centigrade. Both NC and NO types (i.e. empty or full level) avilable. 2. Double level Plastic : Both NC and NO (i.e. empty and full level) in one single sensor. Made using PP plastic and PVC wires. Used for water or any kind of liquid which do not react with plastic. Works well up to 60 degree centigrade. 3. Single level Stainless Steel : Made using SS 316 Stainless Steel and teflon wires. Mainly used for acid, petrol, or any kind of liquid which may react with plastic but not with Stainless Steel. Works well up to 100 degree centigrade. 4. Two Way Magnet Sensor : This Magnet sensor has unique floty type design. It will turn around itself after reaching full level and then it will once again turn around only after going down to empty level. In othe words, it gives close contact when tank is empty....then stays close till it reaches full level and then gives open contact. After that it stays open till it reaches empty level and then gives close contact. So with this single sensor one get empty and full both signals as close and open contact.  

• Type: Photoelectric
• Application: Industrial
• Material: PVC
• Color: Black
• Model Number: PS-R / PS-F / PS-L / PS-M Series
• Brand Name: Delta
• Supply Voltage: 12
• Light Source: 4 element, Red LED (630 nm)
• Output Current: Max. durable pressure 30 V / 50 mA, residual voltage 1.5 V (Flat Type), Max. durable pressure 30 V /
• Dimension: 16 x 30 x 6.8 mm (Flat Type), 32.8 x 11.2 x 21.1 mm (Rectangular Type)
• Number of Outputs: NPN x 1 or PNP x 1 or Push-Pull x 1
• Response Time: OFF : 0.5 ms, OFF-ON 0.5 ms
• Protection Circuit: Protection against reverse power connection, output overcurrent, power supply surge, output surge
• Operation Temperature: -25 C
• Materials: Lens: PC ; Case: PBT ; Wire: PVC
• Cables: 3 Wire 2M PVC Cable Transmitter: 2 Wire 2M PVC Cable, M8 Connector with 200 mm Cable (Flat), M12 Con

• Type: Thermocouples
• Material: Plastic, Stainless Steel
• Length: 2.5mtr, 3.5mtr
• Color: Multi Colour
• Application: Industries
• Power Source: Electric
• Feature: Durable, Fine Finished, High Strength
• Measuring Temperature: Up to 1800oF
• Temperature Range of Cryogenic: 5,000oF

We source fully accessorized and specifically designed Temperature Thermocouples as per the specific need of the clients. These Temperature Thermocouples are known for measuring high temperatures accurately. The Temperature Thermocouples, which we provide, are rugged, dependable and low-cost. We are reliable Supplier of the Temperature Thermocouples from Vadodara. Attributes Suitable for all possible applications Provide accurate temperature rating Moisture proof Excellent thermal shock resistance Availability Thermocouple & thermo resistance M.I. with grounded  or ungrounded junctions Supplied with calibration certificates and accessories Available in Plain, Bayonet, Barr, Head, Washer, Leaf and Ring types Fiber coated, Teflon coated, Stainless Steel breaded, etc. wires are offered Offered in J, K, PT-PT-RH-10% / 13% RTD Resistor sensor Types Of Sensing Tips Band Type Compression Fitting Type Bayonet Type Plain Type Spring Adjustable Bayonet Type Bolt Type Washer type

Ultrasonic sensors present the ideal solution for non-contact position and distance measurement in all industrial areas where environmental conditions such as dust, smoke or steam may affect the sensors. Objects consisting of a variety of materials can be detected to within millimeters regardless of color or shape. The ultrasonic sensor produces a data carrier utilizing very high frequencies that are outside the human's audible range. The time it takes for that ultrasonic wave to pass between the sensor and the object is the value for the distance or the position. Ultrasonic sensors have proven their reliability and precision in many industries, including lumber and furniture, construction materials and equipment, farming equipment and in level control applications. Pepperl+Fuchs' ultrasonic sensors currently encompass twelve series of mechanical designs for through-beam, direct detection and retro-reflective operation. Customer and application specific custom solutions underscore our technological competence in this area of sensors. Product features: Devices with TEACH-IN functionality for fast and simple installation ULTRA 3000 software for improved adaptation of sensors to applications Adjustable sensitivity to the sound beam width for optimized adjustment of the sensor characteristics according to the application Temperature compensation - compensates for sound velocity due to varying air temperatures Synchronization input to prevent cross-talk interference when sensors are mounted within close proximity of eachother Sensors with digital and/ or analog outputs  

• Application: Industrial
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)
• Item Code: FMIPL-ABR-052
• Brand: Flowtech
• Media: Water
• Flow Rate: Max. 80,000 LPH
• Connections: Flanged, Screwed, Triclover Joint, Hose Nipple
• Temperature Range: 0 to 50 Deg C
• Accuracy: +/- 2% F.S.D
• Repeatability: 0.50%

• Type: Sensors
• Material: Plastic
• Application: Automobile Use
• Color: White, Grey
• Condition: New
• Alarm Range: 1-2 Mtr, 2-5Mtr

• Type: Bite Force Sensor
• Material: Plastic
• Condition: New
• Material: Stainless Steel
• Cable Length: 3 meter

• Features: Compact design, Easy to install, High sensitivity