Special Purpose Paints Dealers in Makarpura, Vadodara

• Packaging Size: 40 Kg
• Packaging Type: Bag
• Country of Origin: Made in India
• Brand: Asian Wall Putty
• Usage/Application: Exterior
• Putty Form: Powder
• State: Power Coating

• Color: Blue, Copper, Gold, Orange, Pink, White
• State: Aerosol, Liquid, Paste, Powder
• Application: Painting
• Application: Brush, Roller, Spray Gun
• Finishing: High Gloss, High Sheen, Mild Sheen, Soft Sheen
• Packaging Type: Can, Plastic Bottle
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L, 200ml, 300ml, 400ml, 5-10 L, 500ml

• Features: Accurate results, Reliability, High effectiveness, Accurate composition

Premier EPOXY FINISH PAINT is a two component polyamide cured Epoxy coating. It forms a hard tough coating, resistant to abrasion and impact. TYPICAL USE : As an intermediate or finishing coat for protection of steel and concrete in moderate to corrosive environment. It can also be used for repair and maintenance work where performance of Epoxy coating is required. It can also be used as a Self priming , eg - in tanks.

• Finish: High Gloss
• Color: BLACK
• Form: Liquid
• Packaging Size (ex. 1L or 1Kg): 200 KG
•  :  

• Application: Spraying
• Color: Gold
• Condition: New
• Packaging Type:  Can,  Plastic Bottle
• State: Liquid
• Feature: Easy To Use,  Eco Friendly, Non Toxic, Protection Against Corrosion, Quick Drying
• Packaging Size: 200 ml – 500 ml
• Type: Gold Spray Paint
• Certification: ISI Certified,  ISO 9001:2008

• Brand Name: Asmi Chem
• Color: Red,Green,Blue etc
• Packaging Size: 5-15 liter
• Packaging Type: Plastic Container
• Paint Base Type: Water Based Paint
• Finish: High Sheen
• State/Form: Liquid

• Application: Epoxy
• Packaging Size: 5
• Brand Name: PCR 01
• Application: Industrial
• State: liquid
• Form: Liquid
• Packaging Type: HDPE CAN
• Color: REDISH,BROWN,WHITE
• Physical State: Liquid
• Grade Standard: Technical Grade
• Density: 1.25 to 1.3
• Flash Point: 25
• Material: Liquid state
• Weight: Minimum Size 25 kg
• Product Type: CHEMICAL
• Bottle Size: 5 KGS

• Color: Blue, Bronze, Copper, Gold, Orange, Pink, White
• State: Aerosol, Liquid, Paste, Powder
• Application: Interior Use, Painting Use
• Application: Brush, Roller, Spray Gun
• Finish: High Gloss, High Sheen, Mild Sheen, Soft Sheen
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L, 200ml, 300ml, 400ml, 5-10 L, 500ml
• Packaging Type: Plastic Bottles,Plastic Cans,Plastic Barrels,HDEP Drums

WATER BASED CEMENT PRIMER   RANGEELA (Acrylic Distemper)   ROLEX (Plastic paint)   ROUNAK (Plastic Emulsion)   ROSHAN (Acrylic Emulsion)   ROYAL-SUPER (Premium Luxury Emulsion

• Brand Name: Powerfix
• Packaging Size: 10 kg
• Shelf Life: 12 months under normal storage condition in original sealed containers at 30 deg C
• Surface Preparation: Primed surface must be clean, dry, free of moisture and other contaminants.
• Environmental Conditions: Surface temperature must be at least 3°C above Dew Point to prevent condensation.
• Temperature: 5 – 40°C, 5 – 50°C
• Applied Over: Epoxy primed surface
• Application Method: Trowel & Roller
• Volume Solids: 100%
• DFT or Coat: 0.8 - 1.20 mm
• Theoretical Coverage or Coat: 0.62 m2 / kg at 1000 microns DFT
• Application Instruction: Stir the component A and component B respectively. If settling observed in the component A, loosen the settled material and mix it with the help of pneumatic stirrer.
• Special Notes: Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition etc. FLOORA SHINE is subject to colour change upon ageing. There may be minor variation in shade from batch to batch.
• Type: Three Pack
• Mixing Ratio: By weight
• Component A: 40 parts
• Component B: 10 parts
• Component C: 50 parts (Sand)
• Colour: Desired
• Gloss: Semi-Glossy
• Pot Life: 30 mins. at 30°C
• Curing Mechanism: Chemical reaction between the components
• Flash Point: Above 25°C
• Recoating Time: Min. 16 Hrs at 30°C
• Topcoating Time: Max. 48 hours at 30°C
• Drying Time @ (30°C): ------
• (i) Surface Dry: Max. 4-5 Hrs.
• (ii) Hard Dry: 18 – 24 Hrs.

ceramic pigments, inglaze colours, glass colours pigments

Polyester Pigments, fibre glass, office printing ink, Resin

Fire Retardant Paints, Heat Resistant Paints, Road Marking Paints

insulation paint, coating powder, cold galvanizing spray, anti fungal powder

Organic Pigments, methyl tin stabilizer, zinc phosphating chemicals

Transpek-Silox’s Zinc Phosphate, manufactured from High Purity Zinc salts, offers a unique advantage of enhanced corrosion production in Zinc rich paint & anti-corrosive paint primer systems.Widely used in the manufacturing of Zinc-rich, anti-corrosive paint primer systems

Automotive Paints, industrial coating, paint coating, poly urethane paints

Transpek-Silox’s Zinc Phosphate, manufactured from High Purity Zinc salts, offers a unique advantage of enhanced corrosion production in Zinc rich paint & anti-corrosive paint primer systems.

Polyester Pigments, Frp Canopies, Woven Roving, Polyester Resins

alkyd paints, Automotive Paints, Epoxy Paints, Primer, paints for aluminum

We are offering epoxy paints , polyurethene paints, heat resisting paint. Specialty shades as per customer requirements

Wall Primer, cement wall putty, Exterior Emulsion Paints, interior emulsion

Paints, Spray Paint, Cement Paint, metallic paint

Automotive Paints, Car Paints, Industrial Paints

Car Paints, Automotive Paints, Industrial Paints

Paint, Allied Products

Paint, Iron

rust converter cum primer, Tin Lead Solder Stick, Paint