Surgical Equipment Dealers in Makarpura, Vadodara

We are offering fiber laser marking machine laser marking machine is the third-generation laser marking system successfully researched and developed by employing cutting-edge laser technologies in the world. The optical fiber laser is employed for laser output, and super high-speed scanning system is employed to achieve laser marking. characteristics 1. High efficiency in electrical optical conversion, wind cooling ; 2. Small in size, with high beam output quality, high reliability; 3.the marking speed is 3~12 times of first and second generation of laser markers; 4.no consumable ,10 years service life of the laser source,energy saving. applicable materials and industries 1.used for fields with higher requirements in depth, smoothness and precision; 2.used to engrave metallic and non-metallic materials, for example, stainless steel decorating parts for handsets, clocks, watches, moulds, ics, handset buttons, bitmap marking etc

Led bulbs and lights sophisticated and eye catching devices super quality products with assured quality.

Turbine Roof Air Ventilator exhausts hot, stale air from buildings and allows them to be replaced at low level with fresh air at ambient temperature. It provides a much more pleasant and healthier working environment. We are named among the renowned Manufacturers, Exporters and Suppliers of Roof Turbine Air Ventilator from Gujarat, India. To ensure defect free delivery of our Roof Turbine Air Ventilator at the customers’ end, we conduct stringent test on it before its final dispatch.   Highlights : New Technology : Ventilator runs without Power.        No Electricity : No Operating cost.                        Runs on natural  wind  power, weather and  storm proof        Specially designed vanes to deflect rain water.            Bearing systems.                Remove stale, damp and hot air.                        Reduce condensation, mildew and heat damage to roof.       Easy to install on any type of roofing.                High temperature alloy material.                    Reduces the temperature 3 to 7oC of working area.                Good working atmosphere increases productivity.                FRP translucent hood base for ventilator, so more sunlight inside area. Maintenance free   CFM : 700 to 1800 Appx depend on wind and heat difference.

• Dial Size: 2inch, 4inch, 6inch, 8inch
• Material: Mild Steel, Stainless Steel
• Diameter in mm: 20-40mm, 60-80mm
• Application: Liquid Pressure, Measuring Gas
• Display Type: Analog
• Specialties: Accuracy, Measure Fast Reading, Robust Construction
• Pressure: 0-5000psi

• Size: 21
• Material: Aluminium or SS
• Color: Natural
• Place of Origin: India
• Installation: At extra cost by us

“breeze” wind driven turbo roof air ventilators are ready to fit in any roofing sheds without any structural modifications. It gives excellent ventilation to closed areas. It is economic, eco-friendly and maintenance free. No maintenance cost. removes hot air, gases, dust, fumes, and provides safer, healthier working environment to the occupants.

Avail from us the Rooftop Air Ventilator, which is manufactured using high quality raw material. The Rooftop Air Ventilator, we manufacture is used to soak the pollutants from the operational area of factories & throw it outside and saves the workers from the harmful effects of these gases. We offer the Rooftop Air Ventilators in varied specifications at the market leading price. Why Our Rooftop Air Ventilator? Easy to install Requires minimum maintenanceCorrosion resistant Highly efficient.

• Brand Name: KABIR
• Material: SS,MS
• Certification: ISO 9000-2001
• Place of Origin: VADODARA

We are one of the topmost manufacturer and supplier of Pressure Gauge situated in Vadodara, Gujarat, India. The Pressure Gauge has a stainless case and measuring system which has welded socket available in premium series where the system can be filled with liquid or kept dry. This gauge has protection of IP 65 and IP 66. Also, the system has an accuracy of 0.5%, 1% or 1.6%.

roof ventilator is a wind driven product.hvls(high volume low speed)all types of roof ventilator.frp ,polycarbonate products,louvers,wash basin.

Our company brings forth high grade Turbo Air Ventilators which are processes by engineering in order to draw hot air from industrial, Residential, and Commercial premises upwards. The Turbo Air Ventilators offered by us creates convection current and during the process, it also extracts hot toxic air to be released in the outside atmosphere. This air recycling in our Turbo Air Ventilators injects fresh air into the premises and makes it comfortable in terms of heat and pollution. The Bearing � Less Cylindrical Assembly ensures monitoring-free operations of these Turbo Air Ventilators. Product Details Aluminium Alloy 0.5 mm Fan S.S 304 Fan Powder Coated Fan Zinc Coated Fan FRP Coated Fan Epoxy Coated Fan General Description Basic Size Specifications Diameter : 21" x 28" & 24" x 32" Basic Material of Composition (MDC) Pavan Turbo Air Ventilators are manufactured out of 0.5 mm Alluminium Alloy (IS-31000). Vents made from 0.5 mm Alluminium Alloy Top made from S S 304. Collars made from 0.5 mm S S 304 Bearing less clindrical Assembly manufactured from M.S. Seamless Pipe with Zinc Coating.

• Material: BRASS
• Media: Gas
• Country of Origin: Made in India
• I Deal In: New Only

Product Details: Size 21 Material Cast Iron, Aluminum, Stainless Steel, Steel Automatic Grade Automatic Being a leading firm in this industry, we are deeply engaged in offering a high-quality range of SS Air Ventilator. Features: Easy to maintain Rust proof High strength

By offering two basic variants of Infrared Ceramic Heaters, we have been able to cement our place in the leading Infrared Heater Manufacturers based in Gujarat. The unique construction design of our Heater ensures that the resistance of the heaters is made to remain constant over the whole temperature range, which in turn offers long service life. Furthermore, we use glaze that offers excellent radiation properties providing high radiation efficiency to the product.

We are a well known Manufacturer, Exporter and Supplier of Air Ventilators. The Air Ventilators offered by us is manufactured using cutting-edge technology. The Air Ventilators comes with a MS galvanized frame with stainless steel top Cover, ring, and mounting. Durability, high strength, optimum functionality and smooth functioning are some of the prominent features of the Air Ventilators offered by us.

We are offering immersion heaters. • these heaters constructed in s.s., incoloy 800, inconel 600, copper, titanium, alkaline etc. • s.s, titanium, glass or silica cover used for immersion heater. • lead bonded pipe with clamp plate technical data: • made as per required size and shapes. Application: • in water, oil & chemical tank & vessels. • in anodizing and plating baths etc.

EXPORTERS, MANUFACTURERS, SUPPLIERS OF MOTORIZED AIR VENTILATORS FROM VADODARA, GUJARAT (INDIA)   Along with a 1440 RPM motor, our motorised ventilator systems are electrically powered by motors for areas where high pressures of air are necessitated. Sometimes, the wind velocity may not be enough for roof ventilators to perform at the optimum level. Motorised ventilators are manufactured with an on/off switch to facilitate efficient exhaustion of hot, humid, stale air whenever required.   Ambica’s motorised ventilators ensure a continuous supply of fresh air as they are manufactured using highly effective electric motors. They are environment-friendly and produce no noise with lower vibration levels. Our highly qualified engineers have designed them with precision for a longer lifespan.

By releasing the excess pressure Paarth Safety Valves act as best Safeguards against probable damages of equipments, vessels, pipelines and other pressure systems.   Paarth Safety Valves are useful in varieties of fluids viz. corrosive, flammable, hazardous, toxic and others   Paarth Safety Valves are designed for different pressure conditions from 1 kg/cm2 to 600 kg/cm2     Paarth Safety Valves are manufactured in many different combinations of materials like Brass, Stainless Steel, PTFE and others.

In addition to Textile Processing machineries, we also started our manufacturing operation of "Suprimo" Turbine air roof ventilators which is working with natural wind force. Electric Power Energy is not required for the working of the Ventilators. These Turbine air roof ventilators are with the latest technology ever invented the 'Energy saver' for various industrial purpose. Normally, this unit is installed at a distance 15ft x 15ft. on the roof of industrial sheds and a single unit will cover 225 Sq. ft. inside area and reduces 3 to 7 C the inside room / hall temperature. We enclose our catalogue, copy of News paper Press Notes, and performance certificate for ventilators from our valued clients, for your information and knowledge.   “SUPRIMO” Turbine Air Roof Ventilators New Technology - Ventilator runs without power No Electricity - No Operating cost Runs on natural wind power, weather and storm proof Specially designed vanes to deflect rain water Maintenance free Remove stale, damp and hot air Reduce condensation, mildew and heat damage to roof Easy to install on any type of roofing Reduces the temperature 3 to 7 0C of working area Good working atmosphere increases productivity FRP translucent hood base for ventilator, so more sunlight inside area Appx.CFM 700 in normal wind force Can be configured to meet required fresh Air changes Principally it works like convective Thermal currents, centrifugal force to exhaust, Turbo design creates suction Constructively it is strong, light weight, slight breeze enough to rotate the ventilator It is applicable to Factories, Warehouse, workshops, Industrial sheds, domestic applications etc.    

• Material: Stainless Steel, Brass
• Country of Origin: Made in India
• Water Capacity (Litres): B-Type(10 Litre)
• Working Pressure: 150 kgf/cm2
• Brand Name: Maa Tara Instruments
• Rated Flow: 100 M3/hr

• Diameter: 21" x 28"

We are a trusted source of Turbo Air Ventilators from Vadodara, Gujarat. The Turbo Air Ventilator offered by us is designed specially by our expert team of engineers keeping in mind the specific as well as the general requirements of our clients. Designed as per the international quality norms using the latest technology, these Turbo Air Ventilators have helped us to carve niche in markets across the globe. The glitch free operations of our Ventilators have popularized us as the prime Roof Top Turbo Ventilator Manufacturers and Wind Turbo Air Ventilator Exporter from Gujarat.

BPC Flow meter Brass Body is designed to delivers an accurate Gas Flow to patient from the gas outlets, flow meters are precisely calibrated for Oxygen and Medical Air and are offered with a variety of inlet connections

• Material: Stainless Steel
• Packaging Type: Box
• Country of Origin: Made in India
• Brand Name: A ONE
• Valve Size: 3/4x1 Inch
• Pressure: High Pressure
• Usage/Application: Air

Human Body Voltage Checker is a new and unique visual method of detecting how much static charge a person is carrying. The unit can be wall mounted outside the ESD protected area to avoid charged persons unknowingly entering, or used by operators to periodically check that they are not creating a charge within the protected area. It is very simple to use and only requires the personnel under test to touch the plate on the instrument and directly read the charge level on the meter. Apart from the measuring the charge, it can also be used to safely drain away the charges existing on the body.

• Laser Type: Sealed off CO2 glass laser tube
• Locating Precision: 0.05 mm
• Cutting Speed: 0-45000 mm / min / 0-40000 mm / min
• Cooling Type: Water Cooling
• Features: Adopts New type Materials belt modules, high precision and little wear, extend the life of the mecha

• Material: Stainless Steel , Aluminum
• Condition: New , Old
• Application: Industrial , Factories
• Features: Durable , High capacity
• Colour: Silver
• Shape: Round

Our Turbo Air Ventilator process engineering draws the hot air from industrial /Residential/Commercial premises upwards, creating convection and currant in process extracts the hot toxic air to be released in the outside atmosphere. This premise of air recycling injects fresh air into the premises and makes the premises comfortable in terms of heat and pollution. The Bearing �Less cylindrical assembly ensures monitoring free operation continuously. Turbo Air Ventilators are exactly as the name implies, powered by the wind to create effective ventilation for different industries. Our Turbo Air Ventilator works on wind assisted ventilation. Turbo Air Ventilators are round metal vents with fins in them. Even just a little bit of wind can be enough for rotating our Turbo Air Ventilator. The faster the wind, the faster the turbine will rotate and exhaust the heat, smoke, fumes, humidity, etc. The mechanics involved in the air movement is very simple. The hot air inside the shed tends to rise up. When the Turbo Air Ventilator rotates, it sucks the warm air out through the vent, thereby, bringing out a drop in temperature in the shed and allow supply of fresh air through doors and windows.

CNC CO2 LASER CUTTING MACHINE (AMADA) We have the capability of cutting preformed shapes, profile, angle and mor Power - 2000 Watts Steel Plates - 12 mm Stainless Steel Plates - 8 mm Aluminium – 4 mm Working Area – 2500 mm X 1250 mm.