Swing Check Valve Dealers in Vadodara

• Material: Carbon Steel
• Size: All
• Brand Name: Shree Ambica
• Packaging Type: Box
• Media: Air
• End Connection: Butt Weld
• SKU: SKU16768

Conformity Codes to Standards : Design & face to face dimensions : API 6D / ANSI B16.10 Valve testing : API 598 Flange standard conformity : ANSI 150, DIN PN 10 & PN 16, BS 10 Table D & E   Technical Specification : Valve type : Self acting non-return valve. Description : Single plate wafer type swing check valve. Body type : Short pattern wafer type Disc type : With integral hinge pin Model nomenclature : IVC- check valve with rubber O-ring seat and face sealing IVCT- check valve with PTFE seat and serrated contact faces Size range : 25 NB to 600 NB Pressure rating : PN 16 (max) Operating temperature range : -250 C to 2000 C (depending on MOC) Seat leakage : Zero leak / tight shut off Standard Material of Construction (MOC) Body : SGI /WCB/ CF8/ CF8M/CS-IS 2062 Disc : SGI /WCB/CF8/CF8M Seat : EPDM / Viton/ Nitrile/ Neoprene / Hypalon - for IVC, PTFE or GFT -for IVCT   Key Features : Very low face to face dimensions hence space required for mounting is less than 10% of that conventional valves. Very low weight-total weight is only approximately 1/6 the weight of a conventional check valve. Short wafer body enables mounting the valve with shorter length fasteners of lesser number compared to flanged swing check valve. Approximately 50% saving in cost of fasteners. Considerable secondary advantages resulting in substantial savings in handling, packing, transportation, installation and maintenance. Saving in terms of overall length required for piping. Tightening torque to be applied on the companion flange bolting is lower due to face sealing O-rings. Practically maintenance free due to fewer number of parts and simple construction. Self centering in pipeline due to controlled outside diameter, enables easy installation.

• Design Standard: : BS 1868 / ASME B 16.34 / API 6D Standard
• Inspection & Testing Standard: : BS EN ISO 12266 – I (BS 6755 – I) / API 598 / ISO 5208
• Flange To Flange Distance: : As Per ANSI B 16.10 / API 6D
• End Connection: : Flanged End to ANSI B 16.5, Class 150 / 300 / 600
•  : : BS 10 Table D / E / F / H
•  : : PN 6 / PN 10 / PN 16 / PN 25 / PN 40 / PN 64
•  : : DIN Standard / JIS Standard / IS Standard
•  : : Butt Weld End to ANSI B 16.25
• Manufacuring Size Range: : 1/2″ (DN15) to 24″(DN 600)
• Pressure Rating of Valve: : 150# / 300# / 600#
•  : : PN 10 / PN 16 / PN 25 / PN 40 / PN 64 / PN 100

• Design Standard: MANUFACTURER'S STANDARD
• Shell Design: ANSI B 16.34
• Face To Face Dimensions: MFR'S STANDRAD
• Flange Connection Rating: ANSI B 16.5 150# / DIN PN 10
• Testing Standard: BS EN 12266-1
• Connection: WAFER, RF

• Material: CS / MS / SS
• Size: 80NB to 350NB
• Brand Name: NG
• Country of Origin: Made in India
• Media: Corrosive/non-corrosive
• End Connection: Flanged

  Body : CS (WCB) / SS-304 / SS-316 Trim    : 13% Cr / SS – 304 / SS -316 Design  : Bolted Bonnet Pressure Rating : Class # 150 / 300 /600 Manufacturing Std : BS : 1868 End Connection : Flanged Ends to ANSI B16.5 Size : 25 MM to 500 MM

Lined Swing Check Valve, PTFE LINED REDUCING FLANGE, Lined Blind Flange

The swing check variation is a low pressure drop unit based on a hinged disc. Swing Check Valves are suitable for low velocity applications with infrequent velocity reversals. The valve can be fitted with external weights to allow faster closure to reduce water hammer on flow reversal.

Super provides lined swing check valves from 80 nb to 300 nb lined ball check valves can be lined with pfa fep antistatic pfa pp hdpe pvdf. Moc of the body will be csss + min. 3mm thickness of pfa fep antistatic pfa pp hdpe pvdf lining. This valves are tested visually dimensionally hydro test (body test, sheet test) spark test at 15 kva.

Swing Check Valves, rubber lined globe valve, ptfe lined fittings

Swing Check Valves, Thermowells

Swing Check Valves, ball type flush bottom valves, Industrial Valve

pvdf lined swing check valves, PTFE Lined Pipes, teflon lined pipes