Testing Apparatus Dealers in Vadodara

• Type: Hot Press
• Application: BALL PRESS TEST
• Brand Name: CKE
• Ball Dia: 5mm ± 0.05mm
• Ball pressure: 20 N Including Load and Ball
• Test Stand: 100 mm height X 50 mm diameter
• Material: Stainless Steel

ball pressure apparatus is used for testing parts of non-metallic materials for resistance to heat. it is applicable to electrotechnical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics. ball pressure apparatus is the requirement ball(r2.5mm) and total test force 20n±0.2n ball pressure testing device , pressure level of the state and was placed in the heating chamber on the surface of the test.

• Color: White
• Brand Name: Kshitij
• Country of Origin: Made in India
• Temperature: Ambient to 80 Degree
• Type Of Testing Machines: Tablet Disintegration Testing
• Usage/Application: Tablet Testing
• Size: 370mmx340mmx530mm
• Power Supply: 220V +/- 10% 50hz
• Digital Timer And Counter: 100 Min
• Micro Controller Based: yes
• Resettable: yes
• Surface Finishing: Powder Coating
• RPM: 30 +/- 1 RPM
• Stage/Basket: Double Stage
• Heater: 500 watts
• Display: Alpha Numeric LCD
• Weight: 13.100 Kg
• Power Failure Protection: Yes, Available
• Sensor: Dual Temperature Sensor
• Basket Parking: Auto Basket Parking Assembly

The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.   The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight.   The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.   The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows.   The Cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle. 

Automatic execution of up to 6 independent triaxial tests from start to finish with only one PC, type of tests: total and effective stress, stress path, K0, permeability and unsaturated soil, -high-speed PC closed loop control for continuous monitoring and istantaneous reaction of systems components,user-friendly software for remote control and test procedure, automation components can be also applied to any existing manual system for automatic mode upgrade,space efficiency design, no need of air compressor (with exception of unsaturated soils tests,ideal solution for high demands laboratories which requires high productivity and reliability.

Microprocessor Dissolution Test Apparatus is a solid state instrument designed for the determination of active drug ingredinet in any pharmaceutical formulation tablet or capsule as per IP and USP specifications. This apparatus evaluates adequate bio-availability and provides necessary information to formulate in the development of therapeutically optimum dosage forms. The instrument is designed and manufatured for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the dissolution requirement of the Tablet and Capsule as per USPIP standards.

Tap Density Test Apparatus is designed for determination of the tapped density of powder samples by tapping the cylinder under specific conditions. It can also be used for Granules, Flakes etc.     

• Working temperature: 50 to 200° C
• Temperature Control: PID control
• Temperature Acuracy: ±0.2 °C
• Bath Stirring Motor: 40W
• Capacity: 26 ltr
• Heating Medium: Silicon Oil
• Rotor: 6 Units
• Stirring Motor: speed control motor , 15Wx6
• Stirring System: direct moor driven
• Rotating Speed/accuracy: Primary 1300 rpm ± 15 rpm

• Drum Diameter: : 285mm
• Tablet Fall Distance Tablet Fall Distance: : 140mm

The apparatus is designed to determine the abrasion rate and impact hardness of tablets. OneTwo transparent acrylic drums rotated by superior quality constant speed sturdy motor, mounted in painted sheet metal cabinet with chemical resistant epoxy coating. SPECIAL FEATURES: Realistic abrasion rate is obtained by pre-set revolutions through a pilot lamp as compared to time setting, where voltage fluctuation may change number of revolution in pre-set time.

• Country of Origin: India
• Type: Leak Test Apparatus
• Material: Stainless Steel
• Certification: ISO 9001:2008
• Application: Leak Testing, Lab Testing
• Voltage: 220V
• Condition: New
• Power: 1KV
• Driven Type: Electric
• Phase: Single Phase
• Warranty: 1yrs
• Temperature: 0-50°C
• Vacuum range: 300-600mm
• Brand Name: Optima
• Testing Range: 600 mmhg

Digital Dissolution Test Apparatus, laboratory scientific ftir spectrometer

Testing Apparatus, training bag gloves

Glow Wire Test Apparatus, ignition test apparatus, Humidity Test Chambers