Gate & Sluice Valves Dealers in Danteshwar, Vadodara

• Material: Mild Steel
• Valve Size: 1/2 -5 inch
• End Connection Type: Flanged
• Surface Finished: Polished
• Technique: Hot Rolled
• Voltage: 220 V
• Frequency: 50 Hz

• Finishing: Polished
• Application: Water Fitting
• Specialities: Investment Casting, Heat Resistance, Durable
• Diametre (milimetre): 100 To 1000 Mm
• End Connection: Threaded
• Material: Brass/Bronze, Stainless Steel

• Application: Water/Oil/Steam
• Product Description: Union Bonnet, Inside Screw, Rising Stem
• Body Material: gm
• Type of Seat & Disc: Renewable
• Trim Material: SS 410
• End Details: Screwed Female BSP Parallel / Flange BS:10 Table F (Undrilled)
• Pressure/Class Rating: PN-25
• Test Pressure: BTP 37.5 Bar Hy/ STP 27.5 Bar Hy

Our Metal Clad Plugs & Sockets are designed for heavy duty industrial application. We do in-house painting and lacquering on all the Plugs and Sockets, thereby provide enclosure surface better finish and longer life. The Electrical Metal Clad is also provided with deeply recessed phosphor bronze contacts in sockets for complete safety. The Electrical Metal clad plugs are provided with a scrapping earth connection which makes before and breaks after the main live circuit connection. We ensure that all our offerings are duly tested and are of optimum quality due to which we are reckoned as one of the most well known Electric Sockets suppliers in India. Uses : For heavy load industrial applicationsFor domestic applications like geysers Features : Tensile StrengthAble to adjust high voltage loadEarth connection makes first and breaks last Technical Specifications : 10A, 20A for Single Phase (2P+E), 250V20A, 30A for Three phase (3P+E), 440V Outer casing of non corroding die-cast aluminum alloyInterior molded from superior quality phenolic compoundAvailable in 10A to 100AAvailable in 2 Pin, 3 Pin, 5 Pin & 15 Pin.

• CAST CARBON STEEL: CL-150 STEEL/ALLOY STEEL 1.1/2”(40mm)to 36”(900mm)
• CL-300 1.1/2”(40mm)to 16”(400mm): CL-600 1.1/2”(40mm)to 20”(500mm)
• CL-1500 1.1/2”(40mm)to 12” (300mm): CL-2500 2”(50mm)to12”(300mm)

Design, mfg. & tested as per api, 520, 521, 526, 527 standards models comply to "asme sec.viii" of boiler & pressure vessels code. Registered under indian boiler regulation (ibr). Also approved by chief controller of explosives department(ccoe) conventional balance bellows design. Complete teflon® (feppfa). Lining for highly corrosive services. Soft—seat arrangement for tight shut-off.

• Body: CF8 / CF8M
• Size Range: 1.1/2” To 4”
• Washer: Brass & CF8
• Diaphragm: Viton & NBR
• Sealing Spacer: Viton
• Plug Bolt: S.S.304
• Spring Cover: CF8 / CF8M
• Press Adj. Range: 1˜ 6 kg/ cm2  4 ˜ 10 kg / cm2  20 ˜ 35 kg / cm2
• Temprature: 85° C to 220° C
• Ends: Screwed / Flanged

• Pressure: Up To 40kg/cm2
• Valve Size: Up To 18 Inch
• Finishing: Polished
• Pack Type: Box
• Threaded: Yes

• Features: Optimum strength, Rust proof, High efficiency

Knife Gate Valves are specifically designed and manufactured according to MSS SP81 to meet the worst working conditions in Pulp & Paper, Mining & Steel, Power & Chemical Industries to handle Semi-Solids, Dry-Ash, Chips, Fiber contents Pulps etc. The compact design of the Valves facilitate light weight, minimum space for installing, easy operation and maintenance. The compact Knife edged Wedge is manufactured from Stainless Steel Plates of various grades irrespective of Body material.

   MOC : Gun Metal IS 318 LTB Gr. II .  Inlet : 3" Dia NB Flanged .  Outlet : 63mm Dia Female Instantaneous Oblique Type .  Spindle made of Brass and CI Hand Operated Wheel .  Complete with PVC / ABS Plastic Blank Cap with Chain .  Bearing IS 5290 Type - A with ISI Mark.

Gate Valve, Flush Bottom Valve, Check Valve, Diaphragm Valve

Gun Metal Valves, Gun Metal, PVC Pipes Fittings, Pipe Fittings

Fittings, Alloy Steel Pipe, Steel Flanges, Steel Elbows

Iso Pneumatic Cylinder Operated Knife Gate Valve

High Pressure Valve, Control Valves, customized valve, Industrial Valve

Safety Relief Valves, Brackets, Goods Lift, Hydraulic Power Packs

Gate Valve, Butterfly Valve, Industrial Valve, Material Handling Equipment

Pressure Reducing Valves, Pressure Regulator, High Pressure Regulator

Gate Valve, Bolts, Butterfly Valve, ms pipe fitting, Nuts