Back Back
WB 14 Knife Gate Valve
160,000 Per Piece
1 Piece (MOQ)
Lug type knife gate valve for water applications.Full bore and excellent flow characteristic makes suitable for fluid,sludge and liquids with solids in suspension such as water, sewage and biomass.Size: DN 50 TO DN 600
High Pressure Valve
Get Price Quote
We manufacture High Pressure Valve for high pressure hyper compressors. Our manufactured High Pressure Valve works at pressures of 870 kg/cm. sq. High Pressure Valve manufactured using duplex stainless steels like 17-4-Ph, 15-4-Ph, Inconel and Alloy steels. We make High Pressure Valve available at the best prices in the market. Features : Dimensional accuracy Optimum quality Rust resistantÂÂ
Best Deals from Gate Valves
API526 Pressure Safety Valve
Get Price Quote
10 Piece (MOQ)
Glass Pressure Relief Valve
Get Price Quote
The Glass pressure relief valve is a simple valve used for controlling and limiting the level of pressure levied on the system or the vessel that can be built by a process, equipment or instrument failure, or the fire. In a Pressure Relief Valve, the pressurized gas is flown into the system to release the pressure. The glass pressure relief valve is outlined in such a way that it releases a prearranged set of pressure to keep the Glass vessels safe and also prevents other equipment from being harmed due to the intense pressure released exceeding the limit of their design. When the pressure exceeds its limits, the glass pressure relief valve opens up forcefully and releases a small portion of the gas or fluid that helps in maintaining the appropriate pressure in the system. The Safety Pressure Relief Valve is designed and made up of borosilicate glass and PTFE. The maximum suggested operating temperature of the system is 150°C as well as it works fine under a wide range of pressure. Working & Operation A simple connection is offered for the safety of the vent as well as after each operation; the valve tends to reset itself without any labor or the material cost of a split disk replacement. This freshly developed concept of glass pressure relief valve seat production caters to a pressure seal for the seat. The pressure on the seal will increase with the building up of the inlet pressure. The lip present can achieve this on the inner diameter of the seat that is pressing on the side of the plunger. The pressure of the seat never gets balanced with the weight load as it has in the traditional pressure relief valves as it is not dependent on the weight load for the pressure of the seal. The physical contact between the PTFE seat and the low Friction PTFE plunger allows an easy plunger eviction from the seat at the initial pre-set pressure. Due to a sharp increase in the seat pressure, the valve gets sealed and restricts the gases as well as liquids. The Glass Pressure Relief Valve is admirably suited to control different levels of pressure inside all types of reactors as well as the vessels where a relief valve Is needed to seal the system against both the gases as well as the liquids. It can withstand a maximum temperature of 300°F and can take a thermal shock up to 200°F. Pertinent Features High corrosion resistance qualities Manufactured with TFE construction and Borosilicate Glass High Heat resistance qualities Complete visibility Benefits of Glass pressure relief valves It is entirely corrosion-resistant. It is made up of TFE and Borosilicate Glass. It has high heat resistance qualities. It’s patented seal ensures a better seal functioning against all types of liquids and gases. It comes with clear transparency or visibility for you to inspect. It bears no replacement cost as the valve resets itself. It has no stuffing box to maintain. Final Thoughts The Ablaze Export PTFE pressure relief valves were manufactured to use on the systems that require the corrosion resistance ability possessed by PTFE. The operating principle remains constant as priorly used in the regular line of the Safety Pressure Relief Valves having corrosion resistance qualities made from the borosilicate glass. Ablaze Export glass pressure relief valves have the corrosion-resistant qualities against all liquids as well as gases other than the hydrofluoric acid and the hot concentrated caustics. The Ablaze Export Pvt. Ltd. assures a perfect seal against all our manufactured equipment, as well as liquids and gases.
Brass Plug
9 - 900 Per pieces
50 Piece (MOQ)
Brass Gate Valves
950 Per piece
10 piece (MOQ)
0.0
View Profile
Gate Valves
3,500 Per Piece
Pressure Relief Valves
5,000 - 25,000 Per Piece
10 Piece(s) (MOQ)
Features : Excellent performance Easy to install Sturdiness
GM RELIEF / SAFETY VALVE
Get Price Quote
0.0
View Profile
pressure safety valves
Get Price Quote
0.0
View Profile
Relief Valve
Get Price Quote
A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.
0.0
View Profile
Rod Gate Valve
Get Price Quote
Deep-rooted in Vadodara(India), we are a promising name presenting wide array of products. As we believe in client's supremacy, we decide the acceptable payment methods at the time of undertaking the agreement/contract. Moreover, our payment processing methods are secured.
Cast Iron Gate Valve
3,400 Per Unit
0.0
View Profile
Knife Edge Gate Valve, Wheel Operated for Fly Ash & Slurry, Model-FLY
18,900 - 21,000 Per Piece
1 piece (MOQ)
0.0
View Profile
Pressure Reducing Valve
1,800 Per Piece
0.0
View Profile
Pressure Reducing Station
Get Price Quote
Salient Features Immediately cracks the temperature as per process requirement. Increase latent heat of steam as steam at lower pressure has higher latent heat compare to steam at high pressure. If pressure requirement is less than 3.5 kg / cm², the PRS downstream pipe line will exempted from IBR. It allows lower mechanical strength of steam using equipment & there by reducing initial cost & radiation losses. Consist of :1. Moisture separator with trap assembly. 2. Strainer.3. Upstream, downstream & by-pass valves.4. Pressure reducing valve.5. Pressure gauge with siphon on Upstream & downstream.6.Safety valve. Salient Features Immediately cracks the temperature as per process requirement. Increase latent heat of steam as steam at lower pressure has higher latent heat compare to steam at high pressure. If pressure requirement is less than 3.5 kg / cm², the PRS downstream pipe line will exempted from IBR. It allows lower mechanical strength of steam using equipment & there by reducing initial cost & radiation losses. Â
0.0
View Profile
Gate Valves
Get Price Quote
2 way high pressure solenoid valve
1,300 - 6,000 Per piece
1 Piece (MOQ)
0.0
View Profile
gunmetal globe valve
Get Price Quote
0.0
View Profile
Gate Valves
Get Price Quote
We make available Gate Valves which are in demand owing to its features like controlled resistance to flow, compact design, precise dimension, zero leaks, minimum pressure drop and trouble free long life. The Gate Valve finds usage in industry where air, liquid & gas are used. Also the Gate Valves are available in various MOC and end connections. Clients are eased with the availability of the Gate Valves at economical prices. Manufactured With SS 304, SS 316, Brass & CS Specifications Rating : 800/1500/2500 in SW/SCRD Ends,150/300 in Flange EndMoc : A 105 /A 182 F 304/316/F-11/F-22Range : 1/8'' to 2''End Connection : NPT/BSP/BSPTMoc : SS 304, SS 316, Brass,& CS Packaging Available Standard Packaging or as Customer’s Requirement Minimum Quantity Order 10 piece
0.0
View Profile
CI Gate Valve
Get Price Quote
Metal Plugs
Get Price Quote
By employing impurities-free raw materials, our entire array of products is produced. We, as a trusted name, procure these raw materials only from reliable sources of the market. Far-famed for the excellent Metal Plugs, we are a notable supplier thriving on the customers' trust for a long time now.
Stainless Steel Gate Valve
Get Price Quote
0.0
View Profile
Pressure Regulating Valve
10,000 - 300,000 Per Piece
1 Set(s) (MOQ)
0.0
View Profile
Metal End Plugs
25 Per Piece
50 Kilogram (MOQ)
As we take complete care of the products that we offer, we make excellent arrangements for their storage as well. Thus, there are minimal chances of damage at buyer's end. We undertake online payment procedures which are completely safe and hassle free. The online transactions are supported by advanced security features.
Cast Steel Gate Valve
Get Price Quote
2 Piece (MOQ)
0.0
View Profile
Steel Hex Plugs
Get Price Quote
We are an eminent manufacturer, exporter and supplier of Steel Hex Plugs based in Vadodara, Gujarat. We guarantee that the plugs we offer are made from good quality steel making them strong and durable. The grooves and threading on this product makes it easy to use and screw on. We ensure good packaging, timely delivery and competitive prices on large orders.
0.0
View Profile
Pneumatic Gate Valve
12,000 Per Piece
0.0
View Profile
Bellow Seal Gate Valves
3,500 Per Piece
1 Piece(s) (MOQ)
Shrikar valves pvt ltd is one of the prominent manufacturer and supplier of industrial valves, which provides solutions to diverse industries like chemical, oil, textiles and what not! our commitment to deliver quality industrial valves has helped us make a mark in the global market. Our company is persistently transforming customers' needs into reality by using our latest technical knowhow. We are also on regularly upgrading our production system to adapt latest advancements in technology. Our technical engineers are rigorously engaged in developing new and innovative production techniques to meet the expectations of our clients in terms of quality, variety and cost efficiency. With an ultramodern infrastructure, which helps in delivering qualitative range of industrial valves. Our manufacturing unit is also helpful in product development and production. Our company is committed to offer new age concept-to-application solutions to our esteemed clients, with continuous upgrades in our design, prototypic, testing, quality assurance and foundry operations. Our manufacturing unit also has in-house latest equipment for manufacturing, measuring & testing in accordance to international standards. Further, our motivated team believes in teamwork and works on a singular goal of providing complete satisfaction to the customers. The team comprises experienced skilled & semi- skilled workers and other departmental employees. Their expertise in efficiently handling the varied involved processes ensures achievement of perfection in production.
0.0
View Profile
steel gate valve
Get Price Quote
0.0
View Profile
Filter by Localities
Post Free Ad
