Water Softening Plant Dealers in Vadodara

water softener plant , water softning systems, traditional resin base rechargeble system as well as non rechargable systems

• Capacity: 1-2 m3/hr
• Recover Rate: 60-75%
• Raw water pump: CNP
• Production Capacity: 2000L/h
• Power Supply: AC220V/50Hz

EWC ISO 9001 certified CE Certified Heating Power - 500 W Cooling Power - 90W75W Gas code - R134a Voltage - 220V - 240V frequency -50¬60 Hz Net weight - 16 kg, gross weight - 18 kg, Safety - class -1 CTN size - 340 X 330 x 980.

Softening is a widely used technology for reducing hardness forming ions (Ca & Mg) which precipitate and scale at very low temperatures and pressures. Softening is a reversible ion exchange process wherein the hardness forming ions are exchanged with sodium ions present in the resin group.   Unichem India offers a wide range of softening plants with versatility in flow, flexibility in resin quantities and ease in operation. Unichem India is one of the largest suppliers of the strong acid cation resin used in this process. Advantages Tulsion resins with high resistance to mechanical shock, longer life, high exchange capacity and low consumption of salt. The closely controlled resin bead size minimizes pressure loss. User-friendly, low maintenance & easy to install. Variety of cost effective standard models. Improved aesthetics & rugged design. Simpler distribution & collection systems. Easily up-gradable for higher output. Easy operation & maintenance. Quick availability.

Naturally occuring water can be regarded as a very dilute solution of various salts all water containing Calcium or Magnesium salts in considerable amount are called 'Hard' Water. Such Hard Water when heated the calcium & Magnesium will deposit a hard scale in pipes, heating coils, Boilers etc. With consequent loss in efficiency and a proprtionate waste of fuel and ultimately money.

Water softening is the removal of calcium, magnesium, and certain other metal cations in hard water. The resulting soft water requires less soap for the same cleaning effort as soap is not wasted mopping up calcium ions. Soft water also extends the lifetime of plumbing by reducing or eliminating scale build-up in pipes and fittings. Water softening is usually achieved using lime softening or ion-exchange resins. The Process: The heart of a water softener is a mineral tank. It’s Filled with small polystyrene beads, also known as resin or zeolite. The beads carry a negative charge. Calcium and magnesium in water both carry positive charges. This means that these minerals will cling to the beads as the hard water passes through the mineral tank. Sodium ions also have positive charges, albeit not as strong as the charge on the calcium and magnesium.When a very strong brine solution is flushed through a tank that has beads already saturated with calcium and magnesium, the sheer volume of the sodium ions is enough to drive the calcium and magnesium ions off the beads. Water softeners have a separate brine tank that uses common salt to create this brine solution. In normal operation, hard water moves into the mineral tank and the calcium and magnesium ions move to the beads, replacing sodium ions. The sodium ions go into the water. Once the beads are saturated with calcium and magnesium, the unit enters a 3-phase regenerating cycle. First, the backwash phase reverses water flow to flush dirt out of the tank. In the recharge phase, the concentrated sodium-rich salt solution is carried from the brine tank through the mineral tank. The sodium collects on the beads, replacing the calcium and magnesium, which go down the drain. Once this phase is over, the mineral tank is flushed of excess brine and the brine tank is refilled. CHEMICAL REACTION DURING SOFTENING PROCESS :- Ca (HCO3)2 + Na2 R = RCa + NaHCO3CaSO4 + Na2 R = RCa + Na2SO4MgCl2 + Na2R = RMg + NaCl  REGENERATION PROCESS :- Raw water will continue to get softened till the resin gets exhausted. Bringing back the resin to it original form is called regeneration. Softener resin is regenerated by sodium chloride- Nacl (Common salt) solution. The common salt solution is kept in the regeneration tank. During the regeneration process, salt solution is injected by the ejector tube into softener. The Nacl (salt solution) replaces ca, Mg (Hardness) from the resin, the regeneration is done every day or every few days or every week depending upon the usage and design of the water softener plant.  CHEMICAL REACTION DURING REGENERATION PROCESS :- RCa + NaCl = RNa + CaCl2RMg + NaCl = RNa + MgCl2  Application: Boiler Feed Cooling Tower Make-Up Air Conditioning Plant Textile Processing Beverage Production Hospitals, Hotels, Laundries etc. Product Details ES Treatment Plant Effuent Treatment Plant DM Water Treatment Plant Ceramic Membrane System Industrial RO Plant ETP Membrane System MBBR Sewage Treatment Plant Activated Carbon Filter Pressure Sand Filter Neno Filtration Ultra Filtration Water Softening Plant Our Document.PDF Get Touch With Us You can also send us an email and we’ll get in touch shortly, or Call our Number : - ( 0265)2417347/2426826. Locate Us  

Softening Plant, Activated Carbon Filter, Micron Filters, Ro Plant

Softening Plant, DM Plant, Water Treatment Plant, Water Heater, Stp Plant