Zoloto Valves Dealers in Vadodara

• Country of Origin: India
• Certification: ISO 9001:2008 Certified
• Weight: 10-15kg
• Feature: Blow-Out-Proof, Casting Approved, Good Quality, Investment Casting
• Color: Grey, Silver
• Condition: New

• End Connection: Forged – SW / Screwed & Cast – Flanged / RTJ – Flanged / BW Ends
• MOC: Forged – A105, F304, F304L, F316L, F11, F22, F5,F9
• Cast: WCB, CF8,CF8M, CF3, LCB, LCC, WC6, WC9, C-12
• Construction: PTFE Sleeved, Inverted Plug Pressure Balanced.
• Pressure Class: Forged – 800#, 1500#, 2500# & Cast – 150#, 300#, 600#, 900#, 1500#, 2500#
• Sizes: Forged - 0.5 Inch TO 2 Inch & Cast – 1.5 Inch TO 16 Inch
• Design Std.: Forged – BS5353 & CAST – BS 5353 / API 599

We offer following types of Lubricated Plug Valve, Non-Lubricated Plug Valve, Eccentric Plug Valve, Expanding Plug Valve, Sleeved Plug Valves, PTFE Lined Plug Valves, Double Block & Bleed Plug Valves.

• Brand Name: SG
• Material: A 105, WCB, CF8, CF8M
• Media: Hot Oil, Chlorine, Critical Gas/liquid, Steam.
• Application: No return flow, reliable
• Place of Origin: Ankleshwar, Gujarat
• Pressure: 800#, 150/300#
• Port Size: 15mm to 300mm
• Temperature of Media: 400 deg C

Manufacturers of forged lift check valves in a 105, f 304, f 316, f 11, f22 etc. And cast swing check valves in wcb, cf8, cf8m in 150300#.

• Valve Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5
• Type: Industrial Air Valves, Industrial Gas Valves, Industrial Liquid Valves, Industrial Valves
• Material: Brass, Carbon Steeel, Carbon Steel, Cast Iron, Cast Steel, Gun Metal
• Usage: Air Fitting, Gas Fitting, Oil Fitting, Water Fitting
• Certification: ISI Certified, ISO 9001:2015
• Power: Hydraulic, Manual, Solenoid, Gear
• Temperature Pressure: High, Low, Medium
• Specialities: Casting Approved, Durable, Heat Resistance, Investment Casting

we are the exporter of industrial valves, mechanical anchors, chemical anchors, rebar chemical, pipes fittings, gi and ms pipes etc..

• Country of Origin: India
• Size: Standard
• Feature: Durable
• Condition: New
• Pressure: High, Low, Medium
• Application: Industrial
• Automation Grade: Manual

• Center disc Butterfly valve: Double offset butterfly valve
• triple offset butterfly valve: Lined Butterfly valve

• Material: Stainless Steel
• Application: Water Fitting
• Weight: 10-15kg
• Feature: Durable
• Color: Silver
• Pressure: Medium

We supply Industrial Valves, which are manufactured using top-grade metals like, stainless steel, galvanized iron, etc. and are acclaimed for their high tensile strength. Owing to our well-maintained and organized inventory system, we deliver the same in the committed time. We are offering our entire range of products in excellent quality packaging to guarantee zero damage during transit. For this, we have hired only professional packing personnel to ensure the same.

• Usage: Water Fitting

Reckoned as leaders in this industry, we are providing our esteemed clients with excellent quality Inline check valve. The offered fitting is manufactured using high quality raw material and advanced technology. We assure our clients that our range is quality examined on predefined parameters, in order to meet industry standards. Apart from this our prominent clients can avail these systems, as per their requirements at highly competitive price.

We are offering fire hydrant valve isi marked.

We are the Supplier of Industrial Valves (metallic & non metallic valve) Industrial Metallic as well as Non-Metallic (PP/HDPE) Valves viz. Ball Valve, Gate Valve, Globe Valve, Check Valve, NRV, Butterfly Valve & Strainers, which is recognized in the market for its high level of efficiency. Our Valves are undergo rigorous quality testing processes. We offer TPI. We can handle the Project Orders of Valve as per the requirement of the clients.

• Valve Size: 25mm (1 Inch)
• Specialities: Casting Approved, Blow-Out-Proof
• Material: Stainless Steel
• Color: Silver
• Finishing: Polished
• Corrosion Resistance: Yes
• SKU: SKU17115

• Application: Industrial
• Pressure: Medium
• Feature: Blow-Out-Proof, Corrosion Proof
• Flange End: 1" to 12"
• Screwed End: 1" to 4"
• Available M.O.C: PP (Polypropylene)

• Material: Metal
• Finishing: Coated
• Automatic Grade: Manual
• Packaging Type: Carton
• Valve Size: 1/2inch, 1.1/4inch, 3/4inch
• Specialities: Durable, Casting Approved
• Brand Name: ZAC

Product Types Bolted Bonnet Pressure Seal Bonnet Knife Edge Gate Valve Sluice Valve Conduit Gate Valve Double-Disc Type Wedge Type

Butterfly Valve | Ball Valve | Check Valve | Globe Valve | Non Return Valve | Foot Valve | Air Release valve | Plug Valve | Sight Glass Valve | Pressure Reducing Valve | Steam Stop Valve | Gate Valve / Sluice Valve | Safety Relief Valve

We are engaged in making available Ball Valves that are durable and usually work to achieve perfect shutoff even after years of disuse. Hence, our Ball Valve is an excellent choice for shutoff applications. This Ball Valve, which we offer, does not offer the fine control that may be necessary in throttling applications but are sometimes used for this purpose. Construction : Our Ball Valve is has a spherical disc, which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be in line with the port position letting you "see" the valve's position Technical Specifications : MOC : SS 304 / SS 316 / SS 202Pressure Rating : #150 / #300Size Range : ¼� To 6�Design Option : Lever OperatedEnd Connection :Flanged / Screwed / Socketweld / Tri CloverDesign Std : BS 5351 / BS 6755 / API 598

We manufacture spring operated check valves for dn 15 to dn 100 sizes.the valve material is ss304 ss 316 bronze brass cast iron this valves are manufactured on precise cnc machine for dimensional accuracy finished parts are tested for leakages as per din standards.

• Material: Stainless Steel
• Brand Name: AIRA AND MARCK
• Pressure: High Pressure, Low Pressure, Medium Pressure, Vacuum
• Media: Air, Water, Gas, Fuel, Powder/Solids
• Temperature Of Media: High Temperature, Low Temperature, Medium Temperature, Normal Temperature
• Valve Size: 80 - 600 MM
• WOG Rating: 150, 300, 600, 800
• Automation Grade: Manual
• Ball Seat: PTFE
• Steel Grade: 304 AND 316
• Branded: Branded
• Condition: New
• Threaded: Yes
• Fire Safe: Yes
• SS Grade: 304

The floating ball design of Ball Valves is the universal choice for most process and utility applications. In this design, sealing takes place by allowing the ball under pressure to move towards the downstream seat to ef fect a tight seal. Other designs, such as the Trunnion Mounted design, are also maunfactured.   ANTISTATIC FEATURE : Build-up of static electricit y can occur as a result of constant rubbing of the ball against the PTFE seats. This can be a potential fire hazard, especially while handling inflammable fluids. To provide electrical continuit y, spring-loaded plungers are provided between the stem and the ball in single-piece and two-piece reduced bore (80mm and above) and full bore (40mm and above) valves. For smaller sizes, this is achieved through 35% Carbon-filled PTFE stem seals. Depending on the choice of seals, the designs also provide for additional spring-loaded plungers between the stem and the body for full mechanical antistatic capability.   FIRE-SAFE FEATURE : Our fire-safe design valves feature a secondary metal to metal seat which renders the valve fire-safe. An integral metal lip in the body and the configuration of the soft seat are designed to prevent the softening downstream seat from being forced into the port in the event of a fire. When the seat is totally sublimated in a fire, the ball moves and rests against the lip, forming a metal-to-metal seat, thus ensuring leak-tightness. End connectors or inser ts have spigoted ends to ensure concentricity and correct alignment of the ball.   VALVE OPERATION : As a standard, Our Ball Valves are supplied with hand levers or gear units, depending on the valve size. The valves are also suitable for automation using either electric or pneumatic actuators. Most Pneumatic Actuator is avilable for use with our Ball Valves, and is widely used to automate valves in diverse applications.   MOULDED PTFE SEATS WITH SLOTS : PTFE seats are manufactured from moulded PTFE for a better grain structure compared to other methods of manufacture. Slots are provided in the seats to relieve the pressure past the upstream seat and prevent it from being forced against the ball. These features help lower operating torques, permit higher dif ferential pressures and reduce wear, besides extending service life.   We are offering our clients a wide range of Ball Valve that is applicable in various industrial areas. Designed & developed using finest quality raw material, these industrial valves are soft seated & usually work to achieve perfect shutoff and easy operation at the clients’ end. We deliver these valves within the stipulated time-frame to ensure maximum satisfaction of the clients.   Some well-known features of these valves are:   Smooth flow No blockage Tight closing Leakage proof Moisture resistance Less power consumption High flow capability Convenient operation   Other details:   Suitable for both horizontal and vertical installation Actuator motor: Reversible Body vent device Fire proof designed Anti-static Material: Carbon steel, Duplex /Stainless Steel, Special Alloy   Specifications:  

We are fruitfully catering to the assorted demands of the customers by offering Stainless Steel Ball Valve. Product Description: Keeping in sync with time, we are able to offer Stainless Steel Ball Valve to our patrons. We have emerged as a leading manufacturer and supplier of Stainless Steel Ball Valve. These valves are precisely manufactured by our professionals using high-quality raw materials and cutting-edge technology. For the diverse requirements of our clients we are involved in offering a wide assortment of Stainless Steel Ball Valve. These are highly demanded in market due to their superior finishing and corrosion resistant nature. Offered valves have smooth finishing and high durable in nature. Additionally, these are available in market at competitive prices. Our expertise lies in successfully handling the demands of a wide range of ball valves including High Pressure Ball Valve, Low Pressure Ball Valve and Instrumentation Ball Valve. Backed by well developed manufacturing facilities as well as services of experienced industry professionals, we can deliver these in both standard and customized specifications. We are engaged in manufacturing with excellent quality of Stainless Steel Ball Valve. this are ideal for application in different industries.These valves are widely demanded in the market owing to their smooth functioning. Features: Reliable Cost effective Fine quality Durable finish High strength Robust construction

We are offering ball valve. fully adjustable stem packing. anti-blow stem design. gland bush prevents stem galling. the stem is inserted in the body and back seated through & pife rings against the body wall.the gland is fully piloted in the body and the stem is a close fit inside the gland.the design assures full support of the stem at all times. every precaution has been taken to protect the stem seal against damage or loosening due to mechanical forces. a fillet relief is accurately machined on the lip of the ball part, permitting the ball to snap into the open position in perfect alignment snugly against the teflon seat. In this position the reduced compressive force on the seats helps to minimize the possibility of cold-flow of the teflon rings and extends service life. r-square ball valves achieve leak tight sealing even at low pressures by means of accurately controlled squeeze on the seat rings and ball.

• Application: Fire Safety
• Size: 6 Inch
• Material: Brass
• Country of Origin: Made in India
• Pressure: Medium Pressure
• No Of Valve: One

Features. : One piece integral Ball Sem combinationNo backlash in stem and ball even after prolonged serviceExtraordinary strength due to metallic body and Ball core designExceptionally low torque as compared to plug valveSelf adjusting packing for maintenance free spindle sealing

• Material: Metal
• Application: Gas Fitting, Oil Fitting
• Pattern: Plain
• Condition: New
• Pressure: High
• Automation Grade: Automatic

We are offering stainless steel ball valve. Features : - well aligned assembly - accurately machined bracket and coupler, perfect location - ease in dismounting even without affecting valve functioanl position - design : floating ball/ trunion mounted ball valve - top entry ball valve - design : single piece, two piece, three piece, lined valve, jacketed valve etc.

We make available Gate Valves which are in demand owing to its features like controlled resistance to flow, compact design, precise dimension, zero leaks, minimum pressure drop and trouble free long life. The Gate Valve finds usage in industry where air, liquid & gas are used. Also the Gate Valves are available in various MOC and end connections. Clients are eased with the availability of the Gate Valves at economical prices. Manufactured With SS 304, SS 316, Brass & CS Specifications Rating : 800/1500/2500 in SW/SCRD Ends,150/300 in Flange EndMoc : A 105 /A 182 F 304/316/F-11/F-22Range : 1/8'' to 2''End Connection : NPT/BSP/BSPTMoc : SS 304, SS 316, Brass,& CS Packaging Available Standard Packaging or as Customer’s Requirement Minimum Quantity Order 10 piece

We are one of the most renowned Industrial Valves Exporters of India. Our quality Industrial Valves are maintained as per the international standard with American Standard of ASTM-D and �BSI� Specification (BS) of British Standards. We render array of Industrial Valves such as Industrial Ball Valves and Industrial Control Valves. Our Valves are durable and ensures trouble free performance. The quality raw materials used in our Valves empowered them high efficiency and effectiveness. Industrial Valves provided by us are technically sturdy and tensile due to which they can be used with great ease. Our products need low maintenance and available at pocket friendly prices.

• Material: Stainless Steel
• Color: Available in Various Colors
• Number Of Way: 2way
• Pressure: 1000 Kpa
• Feature: Durable, Good Quality
• Port Size: 5cm-60cm

Alfa Laval is a world-leading supplier of valves for a wide range of sanitary applications within the food, dairy, beverage, bio-pharm and personal care industries. Our products are developed not only to meet your exacting demands for safety, reliability, efficiency and hygiene, but also to ensure the careful handling of your products.