Carbon Paste Dealers

• Shelf Life: 24 Months from Date of Manufacture in Sealed Condition.
• Packaging: 500 g (brushtop) - 1 kg - 5 kg

Solid lubricant paste for effective running in, assembly, press fitting and anti seize applicationsBenefits\n\nExtremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)\nLow coefficient of friction\nHigh pressure withstanding capacity\nLoad bearing capacity exceeds the yield point of most metals\nOffers protection from wear and friction\nEliminates metal-to-metal contact\nPrevents seizure, scoring, galling, fretting corrosion and stick slip\nMakes disassembly easier and non-destructive irrespective of operational period or conditions\nEconomical to use owing to its high surface coverage capacity\nAids running in and provides emergency lubrication during start ups\nPrevents cold welding and stick slip\nGood affinity for metal surfaces\n\nApplications\n\nAs a running-in, metal priming paste for all new or rebuilt mechanical equipment such as journal bearings, gear boxes, splines.\nAs a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.\nFor lubrication of all sliding metal surfaces to reducewear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splines shafts, pumps,\nvalves, threaded spindles, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings.\nAs a metal working lubricant to prevent galling, seizure, welding and metal pick up on tools and dies in deep drawing, machining, punching, stamping, thread rolling,\ncold heading, waging and forging.\nAs a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.\nAs an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.\nAs a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.\n\nMethod of Application Clean the sliding surfaces and friction points. Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film. Do not use in excess as is customary with greases. Do not mix with other oils or grease.

• Form: Powder
• Application: Industrial

What is Carbon Electrode Paste? Carbon Electrode Paste is a self-baking electrode used in submerged arc furnaces for delivering power to the charge mix. Electrode Paste is added to the top of the electrode column in either cylindrical or briquette form. As the paste moves down the electrode column the temperature increase causes the paste to melt and subsequently bake forming a block of electrically conductive carbon. Electrode Paste is essentially a mix of Electrically Calcined Anthracite (ECA) or Calcined Petroleum Coke (CPC) with Coal Tar Pitch. The Manufacturing Process CPC or ECA is screened to different fractions and stored in hoppers. The various fractions are then weighed using a batching system and taken in a bin. The composition of fractions is taken according to the desired Electrode Paste properties. The resulting aggregate is preheated in a mixer to temperatures up to 180oC and Coal Tar Pitch at 200oC is then added and mixed. The quantity of Coal Tar Pitch added varies depending on desired plasticity. Coal Tar Pitch which is used as a binder in the product is manufactured in-house, using Crude Coal Tar from different sources so as to get the precise Electrode Paste quality.

• Shape: lumps
• Color: black
• Brand Name: WONDER
• Product Type: intermediate
• Condition: semi solid
• Ash Content (%): below 2%
• Dimensions: in 25 kg drum
• After-sales Service Provided: yes

we are a leading manufacturer of carbon paste. We grind carbon of desired grades like n220, n330, n550 etc then mixed with the desired base of plasticizers like cp, dop, dbp, dinp, cantone etc. Then packed in 25 kg plastics drum.

• Shape: Lumps
• Application: Calcium Carbide & Ferro Alloys Plant
• Condition: Semi solid
• Ash Content (%): Below 2%
• Dimensions: In 25 kg drum
• Apparent Density: 1.35 gms/cc Max

We are one of the major manufacturers, exporters and suppliers of Carbon paste in the market. Processed and made with excellent quality minerals CPC & Tar pitch, The Carbon Paste we offer is widely used in various industries for different applications. Pure and authentic, our Carbon Paste is non hazardous and can be easily used. Available in various quantities and packaging, clients can avail carbon paste at reasonable prices. Made of : Calcined Petroleum Coke (CPC) Electrically Calcined Anthracite Coal (ECA) Selective Coal Tar Pitch Binder Attributes : Environment friendly Easy to apply Versatile Viscous Non hazardous Withstands high temperatures Applications : Aluminum Plants Chemical industry

we offer crc graphite assembly paste + mos2. 1. general description a universal assembly spray paste. special sprayable paste which contains a combination of the extremely pressure-resistant solid lubricants molybdenum disulphide (mos2 ) and graphite, stabilised in adhesive mineral oil. 2. features high load-carrying capacity reducing the appearance of the grooves when inserting components water-repellent good corrosion protection oxidation resistant high thermal stability (up to 650°c) very good adhesion prevents seizing prevents fretting corrosion, scuffing and stick-slip constant ratio of starting torque to initial tension smoothes out rough surfaces 3. applications mounting of longitudinal press fits, eg. for bolts and bearing seats assembly of seals and screws surface treatment of rolling and sliding bearings to improve the running-in and to extend lifetime lubrication of guides and joints with very slow sliding movement bearing lubricant for wheel bearings and kiln carts lubrication of all types of open gears running-in lubricant of new gear wheels 4. directions shake can very well till agitator ball is free apply a thin, even layer as running-in for rolling and sliding bearings, polish the applied product with a soft cloth. remove any excess. as running-in for new gear wheels : let the gears operate at a low speed and with a low load (eg. moving by hand) without the operating lubricant.then fill the system with the lubricant. 5. typical(*) product data temperature range : -30°c to +650°c load carrying capacity (four-ball welding load) (din 51350) : 7.000 n flash point of aerosol : < 0°c

• Type: Carbon Paste
• Application: Industrial
• Color: Black
• Packaging Type: Drum
• Warranty: 1 Year
• Packaging Size: 25kg, 50kg
• Density: 1.38 g/mL 25 Degree C
• Average Particle Size: 80 nm

We, along with our team members make all the payment procedures completely transparent that makes us a trustworthy name in the industry. Keeping in consideration the latest standards, we are involved in supplying only high quality Electrode Carbon Paste at reasonable prices.   Typical Characteristics of CPC Based Tamping Paste - Green Paste Volatile Matter : 12% Max Fixed Carbon : 87% Ash : 1.0% Max Plasticity : 5.15% Apparent Density : 1.55gms/cc Binder Content : 19.21%   Baked Paste At 1000 0C Apparent Density : 135gms/cc Min Volatile Matter : 12% Max Electrical Resistivity : 90 ohm-meter Max Compressive Strength : 200kg/cm2 Min Porosity : 35% Max   Typical Characteristies of Anthracite Coal Based Tamping Paste - Green Paste Volatile Matter : 11% Max Fixed Carbon : 84% Ash : 5.5% Max Plasticitiy : 5.12% Apparent Density : 1.55gms/cc Min Binder Content : 15.17%   Baked Paste At 1000 0C Apparent Density : 18 gms/cc Min Electrical Resistivity : 70 ohm. Meter Max Compressive Strength : 225 kg/cm2 Min

We are manufacturing high quality carbon electrode paste which is a self baking electrode used in electricsubmerged are furnace for delivering power to the change mix. Carbon Electrode Paste is a mix of electrically calcined anthracite or CPC with coal tar pitch.

Quality Pitch manufacturer by unique Hi-Tech process of its kind in India with high Beta resin & high Cooking value to feed requirements of different Indian Industries like... Aluminum grade, Graphite grade, Electrode Grade, Foundry Flux Grade & Carbon Paste Grade. Use : Manufacture of Roof binder, Refractory Bricks, Battery Industries, Pitch Fibres Pipes, Fireworks and in blast furnaces !addle repairs etc. Packing : 50 Kg. H.D.P.E. Bags, 200 Kgs. M.S. Drums & Liquid in self heated insulated tanker.

Carbon Electrode Paste is a self-baking electrode used in submerged Arc furnaces for delivering power to the charge mix. Electrode paste is added to the top of Electrode column in either cylindrical or briquette form. As the paste moves down the column the temperature increases which causes the paste to melt and subsequently form baked block of Electically conductive carbon. Electrode paste is essentially a mix of Electrically Calcined Anthracite (ECA) or Calcined Petroleum Coke (CPC) with Coal Tar Pitch.CPC received from our own plant or ECA received from overseas suppliers is screened to different fractions and stored in different hoppers. The various fractions are then weighed using electronic batching system and taken in a bin. The proportions of the fractions are fixed according to the desired properties of electrode paste. The total aggregate is then preheated in sigma type mixer upto 1800C and then liquid coal tar pitch is added at 2000C and mixed. Depending on desired plasticity of Electrode paste, quantity of liquid Coal Tar is added. Coal Tar pitch is used as a binder.

Electrode Carbon Paste also known as Soderberg Electrode Paste made from mix of fractions of Calcined Petroleum Coke (CPC) or Electrically Calcined Anthracite Coal (ECA coal) mixed with Coal Tar Pitch as Binder and Anthracene Oil at a predetermined temperature. It is used as conductor in sub merged arc furnace under self Baking process while manufacturing different types of Ferro Alloys and Calcium Carbides. MANUFACTURING PROCESS Calcined Petroleum Coke (CPC)/ ECA Coal produced in the Calcinations plants are brought and subjected to crushing and screening to various fraction sizes as per formulations, the fractions as available are proportioned and mixed with the milled fractions. The desired quantity of fractional material with binder is weighed and transferred into Sigma Mixer. The Mixer is heated to about 1600 C and operated (mixing) for a constant time cycle also called “mixing cycle” to obtain the homogeneity and desired plasticity of the paste. On completion of the mix operation, the product is discharged and dumped on the mould box and cast into blocks for onward dispatches to our valued customers. QUALITY PARAMETERS Carbon Electrode Paste is one of the important factors which govern the quality of Soderberg Electrode; Fluctuations in the quality of electrode paste may lead to operational problems in smelting furnaces. With highly consistent raw materials,unique technical process and management, EECPL ensures a very stable quality in the end products, which reduces the possibility of furnace problems. At the customer’s end the paste is charged on the upper part of Soderberg Electrode, the flowability, measure of Plasticity, is the main requirement of paste. It is important that the paste flows at a reasonable temperature and fills the casing properly. The plasticity of Paste is adjusted while manufacturing by adjusting binder content depending upon the electrode diameter. In the lower baked part of the Electrode, the physical properties of the paste are very important to ensure smooth operation of the electrode without any breakage. 1). These properties are: 2). Low Electrical Resistivity 3). High Mechanical Strength 4). Low Porosity

• Type: Tamping Paste
• Material: Carbon
• Application: Industrial Use
• Grade: Industrial Grade
• Form: Granules
• Packaging Type: Plastic Bags

• Apparent Density: 1.35 gms/cc Max

Electrode Carbon Paste or ECP is a Soderberg Paste produced by mixing a specific fraction of CPC and Electrically Anthracite Coal (ECA) and then impregnating the same with selective Coal Tar Pitch Binder at a definite temperature. ECP is used in Submerged Arc Furnaces for production of various Ferro Alloys and Calcium Carbide.

Functioning smoothly from Maharashtra(India); we are capable enough of serving the clients in a shortest time possible. We are known for providing a qualitative array of products and thus our entire range is strictly checked against varied quality parameters.

we are amongst the well reputed manufacturers, exporters and suppliers of electrode carbon paste. The electrode carbon paste is a soderberg paste and there has been a constant increase in their demand in the market. The electrode carbon paste can be availed at market leading prices from us. processed from a mix of a specific amount of calcined petroleum coke (cpc) and / or electrically calcined anthracite coal (eca), saturated with selective coal tar pitch binder at a definite temperature. used in submerged arc furnaces for production of various ferro alloys and calcium carbide manufacturing process the first step in the manufacture of electrode carbon paste is screening the calcined petroleum coke (cpc) and / or (eca) to different fractions and pulverizing and storing it separately. Following this, pre-determined quantities of different fractions are weighed and transferred to a sigma mixer which is heated to about 150ºc by thermic fluid. The required quantity of binder is also weighed separately and added to the mixer. the mixing is continued for a pre-determined period known as the mixing cycle. At the end of the mixing cycle, the mixed material is dumped on the mould box and cast into blocks for shipment. quality specification at the customer's end the paste is fed in the upper part of the electrode. As the paste moves downwards in the electrode it softens and melts forming the shape of the electrode casing. Flowability of carbon paste is essential for proper operation of the electrode. It is important that the paste flows at a reasonable temperature and fills the casing of the electrode, maintaining a consistent mixture of components. The paste then gets baked to a solid mass as it moves down and is capable of passing the required current to the furnace charge. The plasticity of paste, the measure of its flowability is controlled in the mixer by adjusting the binder content or percentage of coke fines. The lower baked part of the electrode is the final electrode product. The physical properties of this paste are of vital importance to ensure proper electrode operation with out breakages. typical characteristics (green paste) volatile matter 15% maxfixed carbon 84% minash 1.0% maxplasticity45 - 55%apparent density1.55 gms/cc minbinder content22 - 24% typical characteristics (baked paste at 1000deg centigrade) apparent density1.35 gms/cc minelectrical resistivity90 ohm-meter maxcompressive strength150 kg/cm2 minporosity35% max

• Dispensing Method: Jar
• Volume: 25ml
• Product Range: 847 Series
• Brand Name: MG CHEMICALS
• Part Number: 847-25ML

Our company is reputed as trader in the industry and situated in the well-connected area of Tamil Nadu(India). As we are supported by wide distribution network and fastest transportation facilities, we deliver the orders on time.

Electrode Carbon Paste, Tamping Paste

Carbon Electrode Paste, Tamping Paste

carbon paste, Graphite Products

carbon paste, Carbide Blanks, graphite tube, Carbon Rods, Carbon Vanes

Carbon Electrode Paste, calcine petroleum coke

carbon paste, Fluorspar, Ferro Alloys

carbon assembly paste, coal tar products, carbon paste electrodes

Carbon Electrode Paste