Heat Exchangers Dealers in Valsad

• Material: Pvc
• Application: Cooling Tower
• Color: Blue
• Color: Blue
• Thickness: 2-5 mm
• Packaging Type: Packet
• Minimum Order Quantity: As Per Requirement

• Material: Brass
• Shape: Round
• Length: 100-200mm
• Application: Electrical Purpose
• Color: Golden
• Finishing: Polished
• Dimension: 10-20mm, 20-30mm

Application Areas : Heat Exchangers Refineries Power Plants Desalination Plants Ship Building & Ship Repairs Condensers Ferrules Distillers Characteristic : A Copper Zinc Alloy containing tin and small amount of Arsenic, which is added as an inhibitor against indemnification. The pressure of Tin imparts to the alloy good corrosion resistance in a moderately polluted river water and clean seawater, either stagnant or slow moving (upto about 2 mtrs/sec.). The most common and wrought form is tube for heat exchange equipment. Guide to the selection of tube material:Clear river, Lake or Canal Water. Dissolved salts more than 2000 ppm.b. Chloride less then 20 ppm.c. H2S and Ammonia is less than 1 ppm.d. Suspended solids less than 25 ppm.e. For temperature more than 2000C and less than 4500 C. Permissible average velocity of water 1.8-2.0 meters/sec.   Features : Excellent finish Durable Rust resistance   Chemical Composition : Cu - 70.0 to 73.5 Zn - remaining Pb - 0.07 max Fe - 0.06 max Sn  - 0.9-1.2 As - 0.02-0.08

• Size: 100mm
• Type: Pvc Drift Eliminator
• Shape: Rectangular
• Thickness: 100-200mm
• Color: Grey
• Feature: Waterproof
• Dimension: 300X300mm
• Country of Origin: India

The eliminators can be supported at spans as high as 1800mm. Made out of UV resistant UPVC confirming tstandards set by CTI-STD 136, the V-100 drift eliminator uses the 3-pass system tair efficiently out of the drift eliminator while restricting the drift loss tless than 0.05% of circulating water.    Features and Advantages : Uniquely designed notches on the surface of the blade, positioned at the point on the drift eliminator blade where the air changes direction advances the principles of drift elimination.  Not only dthe drift droplets stay on the surface of the blade due to inertial forces but also as the drift laden air enters the drift eliminator assembly the notch on the bottom surface of the blade entraps the drift droplets while causing minimal resistance tthe circulating air. The air then changes direction to follow the sinusoidal path of the drift eliminator while the remaining drift droplets continue in their original direction where they are trapped by the notch on the inner side of the drift eliminator. 

• Size: Standard
• Usage: Industrial
• Type: Automatic
• Material: Stainless Steel
• Shape: Cylindrical
• Voltage: 220V
• Finishing: Polished

We are one of the trusted companies in India, which is manufacturer and exporter of Corrosion Resistance Heat Exchanger. The system we provide is based on latest technology, which is mechanically designed and tested by our engineers so that it can give the best of its performance. Our system is fully customized to meet our client’s requirement.Shell & Coil type Heat Exchangers, Immersion Heat Exchangers, Shell and Tube Heat Exchangers, Bayonet type Heat Exchangers, U-Tube Tubular Heat Exchangers.Material of construction comprise of combinations of highly corrosion resistant materials including Borosilicate 3.3 Glass, Fluor polymers& Exotic metals (Ta, Nb, Ti, Hastelloy, etc.).Features : Optimum Solution for every requirement with a range of designs available & in modular construction. Wide range of duties namely; Condensation, Cooling, Heating, Boiling & Evaporation. Optimum Solution for every requirement with a range of designs available & in modular construction. Fabricated with all major internationally prevalent buttress design and having a very high reliability of the strong and high-duty coupling system used for all components.

We are Manufacturer and Supplier of this product. In chemical industry, Heat Exchangers are used for transferring heat from liquids, gases and vapours. These are also used as a condenser for the recovery of the solvent. Features of ITV Heat Exchangers ITV is a well established name in manufacturing of high efficiency heat exchangers. These are extensively used to transfer heat energy from one medium (fluid, liquid and gas) to another medium (fluid, liquid and gas) without mixing them. We design and develop heat exchangers as per application and requirement of customer. Special corrugated tube design heat exchangers increase the heat transfer area with the same quantity of tubes thus reducing the initial costs. The corrugated design also helps in breaking the scaling by creating turbulence in the fluid flow. Options of various materials of construction from stainless steel to Nickel are available depending upon the circulating media to be used in heat exchangers. Capacity Heat exchangers with heat transfer areas from 1 sq.m to 1000 sq.m can be designed and supplied. Applications : Chemical Industries Pharmaceutical Industries Distillery Industries Breweries Industries Food Processing Industries Sugar Industries

Copper Finned Tubes, that we offer, enable improved heat transfer over plain tubes, thus allowing reduction in size and weight of the heat exchangers and condensers. Copper Finned Tubes are available in straight length with plain end on both sides and also available with interim skip, as per customer design and requirements. Our Copper Finned Tubes are available in either 19 fins per inch or 26 fins per inch. The Copper Finned Tubes offered by us are extensively used in API heat exchangers and for applications like heat exchanging in commercial units for cooling and heating of liquid and gas, including water, oil, steam and air as well as for condensation, evaporation etc. Specifications Outer Diameter : 15.80 mm to 19.05 mmWall Thickness : 1.20 mm to 1.62 mmUnit Length : Up to 3mTemper : QH (Quarter Hard)

Copper finned tubes that we offer, enable improved heat transfer over plain tubes, thus allowing reduction in size and weight of the heat exchangers and condensers.Copper Finned Tubes are available in straight length with plain end on both sides and also available with interim skip, as per customer design and requirements.

We offer cooling towers. Advance make frp induced draft cooling tower with belt driven energy efficient fan, with without sump. Gi structure with working platform.

Cooling towers of Natural draft and induced drafts and its accessories in proven design with aesthetic looks. Fan blades are of FRP, helps you to save power consumption.

• Material: Copper

A device for transferring heat from one medium to another. Shell and Tube Heat Exchanger out of Exotic Metals like Titanium, Tantalum, Nickel, Hastelloy B & C, Monel, Inconel, Zirconium, Niobium, Alloy 20, Alloy 904L, Stainless Steel, & other Special Alloys.

gas cooler, fiberglass cooling towers, Recirculating Chillers

We are offering cooling tower. Incepted in the year 1990, we at national cooling towers (iso 9001:2008 certified company), have become one of the recognized firm engaged in designing manufacturing and erection of an exclusive range of reliable, tailor-made water cooling towers (frp induced draft counter flow, timber induced draft cross and counter flow, rcc induced draft cross and counter flow ) plus air blast coolers and air and water chilling plants. owing to our state-of-the-art manufacturing unit comprising latest machinery, we are able to fabricate high quality cooling towers & air blast coolers and chilling plants as per cit-usa,ce and iso 9001:2008 standards. we undertake site supervision, erection, testing & commissioning. our experience and qualified sales and service staff work in partnership with you to provide technical advice and field service support. 

aluminium extrusion heatsink

Brass Tube, copper tube, Copper Tube Fitting

Industrial Pressure Vessels, Reactors, Trolleys

A Series Cooling Tower, FRP DM Series Cooling Tower

Cooling Tower Plastic Sprinkler, Cooling Tower Spray Nozzle

Extruded Heat Sink, Name Plate, fascia label, speaker grill, Signages

Copper Fin Tubes Copper Alloy Fin Tubes Arsenic Copper Rod

Heat Exchanger Tubes, Copper Nickel Tubes, copper plumbing tube, Gas Tubes

Autoclaves, Cone Blender