Kay Kay Scaffolding Private Limited Dharampur, Valsad, Gujarat

Steel tubes used for inner and outer of Props are continuous welded and conform to IS: 1161, grade YST 210 or in nearer measure with same strength and load carrying capacity

Consists of verticals and captive collars welded on them at 1000500 mm. centres. Transoms. ledgers and diagonals having spigot ends get locked firmly to the verticals by free locking collars

The Crash barrier absorbs maximum impact of the vehicle and ensure minimum damage to the vehicle and the occupants. During night and bad weather the barriers act as a visual guide to the drivers The impact energy is reduced to the maximum possible extent, due to the friction between the WThrie beams and the vehicle, enabling gradual deceleration of the vehicle into the carriage way. The vehicle is prevented from skidding back into the carriage way, thus avoiding the risk to flowing traffic.

Type : Metal Beam Crash Barriers

Material : Metal

Thickness : 2-5mm

Certification : ISO9001:2015

Application : Highway, Road

Color : Black, Grey, Any Color & GI

Condition : New

Finishing : Polished

Country of Origin : India

Horizontals are available in a range or standard sizes of can be made to a special length if required. The forged blade end fits in the cup of the Vertical The simple robust design ensure that horizontals need no maintenance. These are available in the following sizes:

Consists of verticals and captive collars welded on them at 1000500 mm. centres. Transoms. ledgers and diagonals having spigot ends get locked firmly to the verticals by free locking collars

Vertical are available to suit any propping or access application economically. The connection point is set at 5001000mm vertical intervals for maximum variation in use. The lower cups are welded in position, the upper moveable cups are retained by a fixed stop. The vertical are drilled for the fixing of SPIGOT joint. A bolt can be used to restrain upward forces if required. These are available in different sizes of 3000mm, 2500mm, 2000mm, 1500mm, 1000mm or as required

Steel tubes used for inner and outer of Props are continuous welded and conform to IS: 1161, grade YST 210 or in nearer measure with same strength and load carrying capacity