PU Paint Dealers in Valsad

• Country of Origin: India

NEOSHIELD PU Paints are 2 part polyurethane based top coat offering good resistance to chemical, UV. These products are designed to offer best gloss retention. The product has got excellent adhesion strength and also offers a balanced aesthetic and corrosion protection. NEOSHIELD PU Paints are available in Clear / High Glossy / Semi Glossy varieties. Special products with non yellowing fetaures are also available. These products cure at Room temperature and provides excellent flexibility, toughness, good abrasion, chemical & UV resistance. Surface Preparation: Abrasive blasting to Sa 2 ½ Swedish standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3. The surface should be absolutely dry, moisture and oil free before primer application. And for Application on Primer scuff with 100 no type’s emery paper for proper bonding and performance. Application Method: Stir the Base part thoroughly. Mix base and Hardener as per our recommended ratio, by volume, Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add suggested Thinner into mix, if required, depending on application method, and stir gently for few minutes. Stain the paint through nylon filter cloth of 300 mesh size and apply uniformly over the surface. All equipment used for above should be properly cleaned. Apply By Brush/By Conventional spray.

We offer a range of PU Paint that can be effectively used on various surfaces like metal and wood. Our variety of PU Paint is clear and unadulterated. Our variety of PU Paint is available in desired quantities and is supplied in quality assured packaging. We offer PU Paint at competitive prices in the Indian market. Directions For Use For best results, all the surface, interior to be painted should be thoroughly, clean and free from dirt, grease, rust etc. Old loose & flaking paint must be removed by scraping or other means. The paint is supplied in brushing consistency. If thinning is required, mix aporopriate turpentine. This fin must be closed when not in use. This paint dries fast and second coat can be applied after six hours.