AC Drive Control System Dealers in Gita Nagar, Vapi

• Material: aluminum
• Fire Rating: Max 4 Hours
• size: as per customer requirement

Fire rated push up access panel are most innovative access panel mostly used in government offices and hospitals. It is easy to install and remove. It can be easily mounted in wall and ceilings, push up doors are now used often in all the government sector and corporate houses. It can be easily installed and removed and can access the ceiling easily. It is mostly used in central air conditional pipe , wire and tube , toilet to drain or in areas such as the manhole. Access panels provide into drywalls and ceilings, a our innovate design features make them virtually invisible in the ceiling and flush in the finishing wall and ceiling. The door panel receive the same finish as the surrounding surface and can be removed for full access. Suitable both new construction and repairs. Panels arrive ready for installation. The best finishes of ceiling and in drywall.

We are manufacturer and supplier for MCC panel. We offer a high accuracy range of MCC Panel which has got high require owing to its supreme quality and long service life. These are planned to perfection for the distribution of power. These MCC panels are used in Refineries, chemical industries, pharmaceuticals and many others.

• Type: Mccb Switches
• Material: Ceramic
• Application: Electrical
• Application: Home, Office
• Voltage: 220V
• Max. Current: 10-15amps
• Feature: Accuracy, Durable, Long Working Life
• Warranty: 1 Year
• Output: 0-5ma

ABB moulded-case circuit-breakers derive from two families of apparatus: the well-known and established Isomax S series and the recent but much awarded Tmax series. In particular, Tmax are characterised by an extremely high level of performances with limited overall dimensions, installation simplicity and an increasingly greater guarantee of safety for the operator thanks to their reinforced insulation. Tmax circuit-breakers, thanks to their performances, completeness of protection releases and accessories, can be used for all distribution and sub-distribution application for both AC and DC electrical plants.   Furthermore, the new Tmax circuit-breakers use a completely common and standardised range of accessories with considerable advantages in terms of reduced stocks as well as flexibility and ease of use. Then within this range there are also the new residual current releases up to 500 A. Field of application The moulded-case circuit-breakers are used in industrial and civil low voltage plants with service currents from 1 to 1000 A. They are used in direct and alternating current distribution switchgear, for motor protection (Motor Control Center), generators, capacitors and for end users.

• Features: Superior functionality, Smooth operations, Long functional life

We provide Main LT Panels. We also provide Electrical LT Panels, Synchronising Panels, Electrical AMF Panels, Electrical VFD Control Panels, Thyristor Control Panels, Electrical Distribution Panels, Electrical PCC Panels, Electrical APFC Panels etc. We design, manufacture & supply Main LT Panels to our clients. These are also known as Main Low Tension Panels. Main LT Panels are appreciated by our clients. Specifications: �» 14 & 16swg crca sheet fabricated & powder coated cubicle �» Busbar: E91e grade, TPN insulated aluminum �» Make of switchgear: L&t/siemens/Schneider/ABB/or as per clients requirement.

• Type: Lever Limit Switch
• Color: Grey
• Condition: New
• Max. Voltage: 240 VAC
• Current Rating: 40 Amp
• Switch Type: Lever Limit Switch
• Usage: Industrial Use

• Type: Male Instantaneous Blank cap with Chain (Knob Type)
• Size: 2 ½” Male Instantaneous
• Finishing: Polished/Painted, Alu. Alloy- Anodized /Powder coated
• MOC: Copper Alloy (Gunmetal)/Alu. Alloy (Light Alloy)
•  :  

Type : Male Instantaneous Blank cap with Chain (Knob Type)MOC : Copper Alloy (Gunmetal)/Alu. Alloy (Light Alloy)Size : 2 ½” Male InstantaneousFinish :Polished/Painted, Alu. Alloy- Anodized /Powder coated

• Frequency: 50 Hz
• Material: Cast Iron
• Phase: Three Phase
• Brand Name: Millennium Control System
• Country of Origin: Made in India
• Operating Voltage: 440V
• Usage/Application: Power Panel
• IP Rating: IP 66
• Mount Type: Wall Mounted
• Power Source: Electric
• Shape: Rectangle
• Surface Finishing: Powder Coated

• Brand: Megh Automation

We are engaged in manufacturing high quality AC Drive Panels high on demand in the market. At par with the international standards, the AC Drive Panel is manufactured using advanced components and material, which are procured from certified vendors. The AC Drive Panel helps in controlling the speed of the alternate current induction motor by manipulating the frequency of supply. Moreover, for smooth functioning of the panels, the voltage as well as the frequency is changed in same proportion. We make available the AC Drive Control Panel at affordable prices    Highlights : Highly efficient Long lasting performance Rigid construction Easy-to-operate

A standalone solution where all of the control electronics are in the keypad or reader. Compact systems are an easy to administer and cost-effective means of controlling access to a building. However, as the control electronics are all housed in the reader or keypad this type of system is not recommended for exterior or high security interior doors. Brands Offered : Real Time, ESSL, Matrix Barcode

• Feature: Pole configuration can be SP/N, DP, TP & TP/N. » Hinged cover are provided on all enclosures.

Electrical Distribution panels are widely catered to industries like pharmaceuticals, electrical and other small and medium to large size enterprises. They are basically designed to supply power to multiple nodes from a single source. Distribution panels are fitted with circuit breakers to ensure safety in its operation. Distribution panels involve controlling and monitoring of heavy electrical machines and devices. Usually distribution panels are designed as per the requirement of client and so we use blue prints and original panel diagrams given by clients to craft our distribution panels.

Our company suppliers of Bison designer boards. These designer boards are manufactured using high quality wood materials and design them using latest technologies for meeting various residential and commercial needs. Highly applicable for making partitions, interior wall panels and many more these designer boards are specially used for commercial purposes.We offer these boards indifferent sizes and dimensions based on the application level and requirements of our clients. Our designer boards have smooth textured finish and resisting properties towards fire, water, pests and many more. We supply these designer boards to our customers in market leading prices. The pioneers of cement bonded particle boards in India have introduced few designer boards for decorative application of Bison Panels. The board patterns are named as Lumber, Quadra and Murk.They are elegantly suitable for false ceilings, partitions, wall claddings, building facades etc.They are available in sizes 10’ x 4’ (3050 mm x 1220 mm) in thickness 6mm, 8mm, 10mm, 12mm & 16mm.

We offers distribution boards. The complete portfolio for integrated, safe and intelligent power distribution for industrial applications, infrastructure and buildings tools.

• Voltage: 50 Hz AC supply I or III phase Maximum 500V,
• Type of Protection: Flameproof (Explosion proof) Ex-d or Increased Safety Ex-e,
•  :  
• Area Classification: Zone 1 & 2 or Zone 2,
•  :  
• Gas Groups: I, IIA, IIB and IIC (Please refer detailed product specification),
•  :  
• IP Protection: Minimum IP 55 or IP 65/66,
•  :  
• Apparatus standard: For Ex-d - IS 2148/1981 and Ex-e IS 6381/1972 & IS 8224/1976 (Recertification based on IEC 60079 series is under process),
•  :  
• Material: Cast Aluminium Alloy LM-6,
•  :  
• Finish: Corrosion Resistant Epoxy paint Shade 631 of IS
•  :  
• Glass: Heat and Impact Resistance and Toughened Glass TYPE "A". Glass
•  :  
• Gasket: Endless Neoprene minimum 3 mm dia.
•  :  
• Hardware: All flame path - SS Allen Bolt or Threaded. All other SS,
•  :  
• Mounting: Wall / Structure mounting arrangement using Bolt of minimum M8,
•  :  

We are manufacturer and supplier for drive panel. We are offering high range of drive panel which are highly demanded in the market places. Our panel is extensively used in power allocation in a variety of process and production industries. These are widely used in panel in various process and production industries.

Solar Panel, Solar EPC Service, Solar Rooftops, Solar Heat Pipe Tube

Access Control System, Fingerprint Lock, Ip Ir Bullet Camera

Synchronizing Panels, Diesel Generator Amc Services, Diesel Generator Sets

Lighting Distribution Board, Electric Panel Board, Motor Control Centre Panel

Electric Control Panels, Mcc Panel, PCC Panel, Plc Panel