Back Back
wiring duct
All the wiring ducts are manufactured from high impact, self extinguish, wrap proof rigid PVC with lead free material. PVC material carries UL 94 flammability rating of V0 for excellent flame retardancy, continuous use temperature 50°C (122°F). Wiring ducts includes solid & slotted style, narrow slots/finger design provides more slot to closed fit the spacing of high density terminal block and other hardware. The wiring ducts are available in different sizes. Wiring-Ducts comes in standard colour of grey in 1 meter and 2 meter length. Other colour of wiring ducts are also available on request for an minimum order quantity (MOQ).
Material : HDPE, UPVC
Diameter : 40-50cm
Shape : Rectangular
Thickness : 5-10mm
Length : 150-200cm, 50-100cm
Color : Shiny Silver
...more
WirelessHART
WirelessHART eliminates (or reduces) the need for traditional wiring by wirelessly networking new or existing HART devices. By adding WirelessHART to your sensor network, you’ll get more data from your HART devices back to the control room, and you’ll reduce cost and installation time.
...more
Twin Cord End Terminal
Application : Electrical Use
Thickness : 2mm, 5mm
Color : Golden
Finishing : Polished
Surface Treatment : Coated, Non Coated
...more
Trio Power Supply
TRIO POWER for the serial production of machines : Basic functionality at the highest level for 24 V DC Operational safety thanks to high dielectric strength up to 300 V AC Reliable supply with nominal values, even at high ambient temperatures up to 55°C Simple secondary grounding by means of third negative terminal Compensation of voltage dips and recharging of batteries based on definable output voltage.
Type : High Voltage Power Supply
Application : Control Panels
Color : Green
Frequency : 50hz
Tensile Strength : 0-25Mpa
Feature : Easy To Install, Four Times Stronger
...more
Thermal Overload Relays
Thermal overload relays are economic electro mechanical protection devices for the main circuit. They offer reliable protection for motors in the event of overload or phase failure. Starter combinations are setup together with block contactors and mini contactors.This leads to a release of the relay and a change of the contacts switching position.The thermal overload relays are three pole relays with bimetal tripping elements. The motor current flows through the bimetal tripping elements and heats them directly and indirectly. In case of an overload (over current), the bimetal elements bent as a result of the heating.
Type : Thermal Overload Relays
Material : Aluminium
Certification : CE Certified
Voltage : 110V
Frequency : 50Hz
...more
Switch Fuse Units
From 16 to 1250 Amp, up to 690V. The switch fuse is used as the main switch in low voltage switchgears in the industry for distributing power and protecting motors, cables and other devices against short circuits and overloads.The standard switch fuses withstand 100 kA fault current and they are available for all types of fuse links, DIN, BS, NFC, UL, CSA.The range includes single pole to four pole versions, front- or side-operated. The pole module design enables location of the operating mechanism in any position together with the direction of the terminals giving flexibility to installation in different types of cubicle designs.
Material : Cermaic, China Clay
Certification : CE Certified
Application : Indistrial
Frequency : 50Hz
Power : 0-5Kw
Feature : Auto Controller, Durable, Stable Performance
Warranty : 1Year
Punture Voltage : 11000V
...more
Switch Disconnector
The switch-disconnector is largely used as the main switch in low voltage switchgears for distribution of power, starting and stopping motors and isolating loads during maintenance. They are also enclosed in metal or plastic boxes as safety switches to ensure that accidental start of machines is prevented. TThe range from 16 to 160 Amp are either base plate or door mounted by snap-on or screw fitting. Front operated 3-, 4-, 6-, 8-pole and change over types are available as standard. From 200 up to 3150 Amp the switch-disconnectors, also called load break switches, are designed as pole modules and they are available as 1- to 4-pole versions, front or side operated.
Material : Cermaic, Plastic
Certification : CE Certified
Application : Commercial
Voltage : 110V
Frequency : 50Hz
Power : 0-5Kw
Warranty : 1Year
...more
Spring-Cage Connection Terminal Blocks
The proven connection method for applications that are sensitive to vibration. The spring always exerts the same constant force on the conductor, regardless of the influence of the operator. Wiring is simple using the space-saving front connection.
Material : Porcelain, Rubber
Application : Electronic Connectors
Color : Grey
Power Source : Electric
Connection Type : Female, Male
Feature : Electrical Porcelain
Phase : Single Phase, Three Phase
Certifications : CE Certified
...more
Soft Starters
The ABB softstarter portfolio now consists of 4 different ranges making it possible to find a suitable softstarter for almost all possible applications and motor sizes all the way up to 1800A. The softstarter family consists of the Compact PSR, the Flexible PSS, the Efficient PSE and the Advanced PST(B) rangeThe range covers all motor applications from 3 A to 1810 A used in a main voltage between 208 V to 690 V AC.PSR – The compact range, 3 to 105 APSE – The efficient range, 18 to 370 APSS – The flexible range, 18 to 300 A. (Inside Delta 515 A)PST(B) – The advanced range, 30 to 1050 A. (Inside Delta 1810 A)PSR — The compact rangeThe PSR softstarter is the most compact of all the softstarter ranges, thereby making it possible to design compact starting equipments. The system concept with Manual Motor Starters and the PSR provides a far more compact starting solution than for instance a star delta starter. Built-in by-pass reduces the energy loss and makes the connection easier and with only three potentiometers, the set-up couldn’t be any easier. Still, the optimized ramping characteristics will ensure a very smooth start and stop for all applications.PSE — The efficient rangeThe PSE softstarter is the world’s first compact softstarter with both built-in electronic overload for motor protection and torque control for an excellent control of pumps. The compact design with the most important functionality integrated provides a very efficient starting solution. The illuminated language neutral display and the four button keypad make it easy to take advantage of all the advanced functionality in the softstarter. The display will also provide all the necessary information both during ramping and continuous operation.PSS — The flexible rangeThe PSS softstarter allows both in line and inside delta connection making it a very flexible option. Just as on the PSR softstarter, the few settings make the set-up very easy. Connecting an external current transformer makes it possible to activate the current limit function, which will allow you to keep the current at a pre-set level also when starting heavy duty applications. The PSS softstarter is the ideal solution when looking for a robust solid state starting solution where many starts per hour are required.PST(B) — The advanced rangeThe PST(B) softstarter is the most advanced softstarter in the range with almost all imaginable functionality included. All the advanced protections for the motor, the softstarter and the load ensure a trouble free operation. Pre-warnings even allow problems to be detected before the motor needs to be stopped and thereby avoiding unnecessary downtime.The torque control function has been developed and tested together with well known pump manufacturers to ensure the absolutely best possible stop of pumps without water hammering and pressure surges. With the full text LCD display in your own language, pre-programmed application settings and event logging, it couldn’t be easier to set-up and operate. By using the ABB FieldBusPlug, you can decide at any time which bus protocol to use. The fieldbus system will allow you to set-up, control and monitor the softstarter.
Application : Industrial Use
Application : Airport Lounges, Hospital Premises
Weight : 100-1000kg
Input Voltage : 110V
Material : ABS
Power : 1-3kw
Driven Type : Electric
Power Source : Electric
Warranty : 1yr
...more
Smart Managed Switches
smart managed switches offer excellent realtime properties with high data throughput at the same time. The industrial din rail switches support fast ethernet or gigabit on all ports and are ideal for use in the profinet rt or ethernet/ip environment. The fl switch smcs 8gt and 6gt/2sfp gigabit versions also have maritime approvals gl, bv, abs, lr, and dnv. All smcs switch versions can be used in ex zone ii. The nat switch combines nat, routing, and switching in a single device. all devices support:: rstp mrp (client and master) vlans
Size : 2 Inch, 3 Inch
Material : ABS
Certification : CE Certified
Application : General, Office, Restaurants
Design : Customised
Mechanical Life : 1 Year
Current Rating : 16A, 6A
Max. Curren : 110 V DC
...more
Screw Connection Terminal Blocks
Phoenix Contact screw terminal blocks are designed for very high demands. An important characteristic is the maintenance-free connection of conductors. It is not necessary to tighten the terminal screws. The screws are prevented from loosening by the “Reakdyn principle", a screw locking technique developed by Phoenix Contact. All kinds of copper conductors can be clamped without pre-treatment. Splicing protection can also be used in the form of ferrules. A special characteristic of the screw clamping body is the multi-conductor connection, which is often necessary. Very large conductor cross sections up to 240 mm² can also be wired gas-tight and with long-term stability thanks to the high contact forces.
Material : Fiberglass, Porcelain, Rubber
Application : Electronic Connectors
Color : Creamy
Voltage : 110V
Power Source : Electric
Connection Type : Female, Male
Feature : Four Times Stronger, Shocked Proof
Phase : Single Phase, Three Phase
...more
safety relays
Phoenix Contact is setting new standards in safety technology. As one of the first safety products available on the market, PSR safety relay modules for process technology are now certified according to SIL 3/IEC 61508. They are also approved in acc. with EN 50156-1 for continuous operation for Safety Level 3.Conventional safety relay modules often have a very high inrush current, which control systems detect as short circuits. PSR-ESP safety relays provide optimum switch on behavior and have two separate isolated redundant form A contacts and one form B contact with a width of 22.5 mm (0.886 in.), which can switch up to 250 V AC/6 A. They are used to safely electrically isolate the field application from the control system or to adjust the voltage or power.The international standard IEC 61508 applies to electrical and electronic applications, in particular in process technology, such as chemical processing or process engineering and mechanical engineering. Like safety control systems or other control systems, compact safety relays are also an integral part of the safety chain.A new module with safe, slow-release contacts was incorporated in the PSR safety relay product family. Over a narrow 45 mm, the articles provide three enabling current paths and one signaling current path without delayed dropout for category 4 in acc. with EN 954-1. Furthermore, two slow-release enabling current paths – adjustable up to 300 seconds – are available. Single or two-channel control is possible. After the safety inputs have been enabled, the module starts automatically or manually.A connected start button is monitored to check that it functions correctly. To protect them against manipulation, the switches accessible from the top can be covered with the enclosed decal after startup.To monitor emergency stop circuits and protective door circuits without time functions, the PSR safety relay product family provides up to eight enabling paths and one signaling current path each. Modules for process engineering in acc. with IEC 61 508 SIL 3, two-hand control modules, check the parity (< 0.5 s) of the two inputs for applications in acc. with EN 574 Type III C. In the case of controlling, disabling protective devices, safety category 4 is attained. By using the corresponding extension modules, up to five enabling paths can be safely connected.All products of the family include pluggable screw connecting or spring-cage connecting terminal blocks as standard.
Certification : CE Certified
Voltage : 11000V
Frequency : 50Hz
...more
residual current device
Residual current operated circuit-breakers are amperometric protection devices which trip when the system leaks a significant current to earth. They continuously calculate the vector sum of the single-phase or three-phase system line currents and, while the sum is equal to zero, they allow electricity to be supplied; supply is rapidly interrupted if the sum exceeds a value preset according to the sensitivity of the device. Residual current operated circuit-breakers can be classed according to three parameters: Detectable wave form Tripping sensitivity and tripping time Besides, depending on the type of construction, residual current devices (RCDs) may be classed as RCBOs (magnetothermic with overcurrent protection), RCCBs (without overcurrent protection releaser incorporated) and RCD blocks
...more
Relay Card Module
Application Relays are being used as the interface between the two circuits at same or different potential to achieve: Electrical isolation between the controller and the load side For Signal multiplication For Signal amplification And to interface different potential Varioface Relay Modules are specially designed to meet the application of relays in all electrical control panels in various voltage ranges like 12, 24 and 48 VDC and 24, 110 and 230 VAC commonly used in all industries.In practice a relay interface comes into use when flexible interface configuration with large switching capacity range and the possibility of combining different types of contact is required.Varioface Relay Modules are the compact modules carrying multiple electro mechanical / solid state relays on a single PCB along with the required screw terminals and necessary protection and signalling circuitry.Varioface Relay Modules are configured as: Relays in groups of 1, 2, 4, 8 and 16 nos on one board Relays with 1/ 2/ 4 Change Over With/without Fuse Protection with/ without fuse blown indication Relays with socket or directly soldered on PCB Above range virtually offers every interfacing requirement in the electric controls panel Advantages of the module at a glance:Varioface Relay Modules carry all the advantages of relays with the following additional advantages:Visual indication for Relay status, necessary protection circuits, e.g. Free wheeling diode with DC relays etc. make the complete module more useful than just a relay. This default feature of modules minimizes the faults, too. Modular shape and compact size of module helps in simplified construction of the switch cabinets. Wiring gets reduced. It provides convenient means of wiring via properly labeled screw terminals, which reduces the wiring mistakes and debugging becomes easier on later stages. Generally relays are used in group; in which looping of one coil terminal is quite common. On board plug-in jumpers facilitate this function in relay modules and hence external wire looping is not required. Modules are Din Rail mountable. Major components like relays, fuses etc can be replaced easily. On demand more features can be added on the same board e.g. fuses, with / without fuse blown indication. Customization is possible if required.
Color : Light White
Design : Standard
Warranty : 1Year
Current : 5A
Voltage : 110V
Number of Poles : 2, 6
...more
Quint Power Supply With Sfb Technology 1AC, 24V DC, 20A
17,500 - 19,000 Per Piece
1 Piece(s) (MOQ)
Defective current paths are disconnected selectively, the fault is restricted and important system parts remain in operation. Additionally, a comprehensive diagnosis of the connected consumers is carried out by constantly checking the output voltage and output current. The predictive function monitoring recognizes critical operating states, visualizes and reports them to the controller in good time. QUINT POWER guarantees highest system availability. To magnetically trigger standard power circuit-breakers, power supply units must be capable of supplying a multiple nominal current for a short period of time. With the SFB technology (Selective Fusebreaking Technology), and six times the nominal current for 12 ms, this current reserve is always available.
Certification : ISI Certified, ISO 9001:2008
Application : Control Panels, Industrial Use
Color : White
Feature : Easy To Install, Sturdy Construction
Condition : New
Frequency : 50hz, 60hz
Phase : AC Single Phase, DC
Warranty : 1yr
Country of Origin : Germany
Brand Name : Phoenix Contact
Output Type : 24V DC
Input Voltage : 1Ph AC, 230 V
Voltage : High voltage
Function : High voltage electric rat trap
...more
Quint Power supply
QUINT POWER for plant and special machinery : Universal power supply with extensive product range, including special variants and accessories Uninterruptible solutions DC-UPS 10, 20 and 40 A, maintenance-free buffer module Reliable starting of heavy loads with high inrush currents through Power Boost power reserve Can be used worldwide in all industrial sectors thanks to the large approval package High operational reliability even in the event of a permanent failure in one of the three phases Compact power supply units of the new QUINT POWER generation maximize the availability of your system. The SFB technology (Selective Fusebreaking Technology) can be also used to trigger standard power circuit breakers quickly and reliably.
Feature : Easy To Install, Four Times Stronger
Tensile Strength : 0-25Mpa
Warranty : 1yr
Cooling System : Air Cooling
Temperature : High Temperature, Medium Temperature
Automation Grade : Automatic
...more
Quint Buffer
0.2 to 4 seconds of backup power (refer selection chart below)20 to 1A load current rangeNo batteryCost effectiveSlim profile
Material : PVC
Color : White
Surface : Polished
Weight : 20-50 gm
Feature : Durable
...more
QUINT Batteries
1.3, 3.4, 7.2 and 12 amp hour batteries are available DIN-rail or panel mount External Fuse Plug-in Modules Device Markers
Weight : 7.2Kg
...more
Push-In Connection Terminal Blocks
The Push-In Technology series is characterized by the easy, direct conductor connection. The up to 50 % reduction in insertion forces supports easy and direct insertion of solid and stranded conductors featuring ferrules with a cross section of 0.34 mm² or higher. The actuation lever is used to open the spring in order to release the conductors. It can be operated with any tool.
Application : Electronic Connectors
Color : Off White
Voltage : 110V
Power Source : Electric
Feature : Easy To Connect, Shocked Proof
Phase : Single Phase
...more
plc relays
Application System integrators Process & Machine Automation Railways Wind Turbine Machine AutomationThe PLC-INTERFACE is a high-performance interface between the controller and field level. The PLC-INTERFACE relay system provides you with a comprehensive range of ultra-slim, plug-in relays and solid-state relays, plus a complete range of accessories.Choice of connection methodsFor maximum flexibility, the PLC Relays are availbale with screw, spring-cage or Push-In Connection methods.The Push-In technology also allows straightforward, direct insertion of small conductors from 0.34 mm² without tools. They are distinguished by a high level of contact quality and low insertion forces. This facilitates quick, user-friendly, and secure wiring.
Usage : Protective
...more
pilot devices
A complete range of 22 mm Push buttons, Emergency Stops, Selector Switches and Signalling units. These are complemented with enclosures and a wide range of accessories. The main advantages are the robustness and the fast and easy installation ensuring cost efficiency for our customers. The ABB Pilot Devices are suitable for all types of industrial environments, indoor as well as outdoor. Other sectors of common usage include trucks, buses, trains and official buildings. Can be used in many different applications by OEMs, panel builders, contractors, etc. For industrial machines and equipment, control panels and control stations for emergency circuits, alarm and signal equipments, traction equipments, hoists and lifts, door openers, etc
...more
Pcb Connectors
The COMBICON control product range comprises PCB terminal blocks (PCB connection terminal blocks) and connectors for MCR technology. Their versatile design makes them ideal for a wide range of applications in industrial electronics. The product range offers various features and conductor connection options with 2.5/2.54 mm to 7.62 mm pitch. The PCB terminal blocks are designed for currents up to 41 A and voltages up to 630 V. The connectors feature a rated voltage of up to 630 V and a current carrying capacity of up to 12 A. COMBICON power is the PCB terminal block and connector range for PCB connections from 16 A to 125 A. Whether used in frequency inverters or power supply units and chargers, to control wind power generators or connect solar equipment, to operate electric vehicles or simply to connect power PCBs: COMBICON power provides the perfect connection for power electronics. COMBICON power is the PCB terminal block and connector range for PCB connections from 16 A to 125 A. Whether used in frequency inverters or power supply units and chargers, to control wind power generators or connect solar equipment, to operate electric vehicles or simply to connect power PCBs: COMBICON power provides the perfect connection for power electronics. COMBICON power is the PCB terminal block and connector range for PCB connections from 16 A to 125 A. Whether used in frequency inverters or power supply units and chargers, to control wind power generators or connect solar equipment, to operate electric vehicles or simply to connect power PCBs: COMBICON power provides the perfect connection for power electronics.
Material : Plastic, Resin
Certification : CE Certified
Application : Electronic Components Connecting
Grade : DIN, ETDC
Condition : New
Connection Type : Female, Male
Feature : Electrical Porcelain, Proper Working
Warranty : 1year
Current Type : AC, DC
...more
Miniature Circuit Breakers
The S2 Series of miniature circuit breakers offer a compact solution to protection requirements. The S2 devices are current limiting, DIN rail mounted and can offer a good equivalent to fused systems. The S2 is available with application-specific trip characteristics to provide maximum circuit protection. The breakers offer thermal-magnetic trip protection according to B, C, D, K and Z characteristics. For the worldwide market, the breakers carry UL, CSA, IEC, CE and many other agency approvals and certifications.Features : Current limiting Unique bus connection system Wide range of accessories Available with variable depth handle mechanism Optional Z curve for SCR protection CE certified and marked DIN rail or front panel mounting Finger safe terminals Multi-function terminals Suitable for reverse feed 480Y/277VAC and 500VDC versions UL489 - branch circuit protective device. UL file #E212323
Material : Ceramic, Plastic
Power Source : Electric
Warranty : 1year
Current Type : AC, DC
Puncture Voltage : 800-900V
Connection Type : 3way, 4way
...more
mini contactor
ABB mini contactors are compact and powerful contactors. They are ideally suited for applications where reliability is a must and space is at a premium. The dimensions, technical features and the variety of the assortment provide customers a high flexibility in a wide-range of applications. The range offers 4-pole mini contactors and 3-pole mini contactors with auxiliary contact up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) with various contact combinations.
Weight : 6.4 Ounces
Number of Poles : 3 Pole
Ambient Temperature : -5 Degree C
...more
panel assembly
Solar EPC Service
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from AIC Technik Pvt Ltd
Post Free Ad