Computer Monitors Dealers in Vapi

FEATURES ²5 in 1 for Light Meter, Sound Level Meter, Humidity Meter, Temperature Meter and Anemometer ²Large Back Light LCD Display ²Data Hold and Max Hold ²Over-Range Indication ²Low Battery Indication SPECIFICATIONS ²(1) Sound Level :Range : Auto:35dB~130dB ²(2) Light : Range : 0 Lux~200K Lux, 0Fc~20KFc ²(3) Air Velocity : Range : 0.5m/s~30.0m/s ²(4) Temperature : Range : -40~70°C(-40~158°F) ²(5) Humidity : Range : 10~95%RH  

• Country of Origin: India
• Application: Blood Pressure Reading
• Weight: 0-100gm
• Feature: Accuracy
• Automatic Grade: Manual
• Certificate: CE Certified

Light Alloy Hard Anodised Construction Un-manned operation Integral Sturdy ground base Adjustable Sweeping range (+ 30° to 30°) On-Off Knob to stop Oscillation Smooth sweeping Action produces wave like effect. Adjustable flow from 100 GPM to 250 GPM. Wide fog for maximum operator protection.

TAD 3 : Weight Processor Weight processing monitor for advanced process control application. Excellent connectivity with GATE - 3: Profibus DP, Ethernet, Devicenet, Controlnet, Canopen, Interbus, Modbus TCP, Modbus Plus. Excellent operator interface. Easy setup via front panel or PC. Multiple recipe controller – 30 recipes with upto 24 activities per recipe. Non weighing functions such as stirring, heating can also be controlled. Customized software. Application: Batch / Blend / Mix System, Quality critical process weighing, Custom weighing applications, flow measurements.      

These single-gas, multi-gas, PID monitors, controllers, and wireless alarm bar can be installed to provide continuous, always-on monitoring for toxic gases and gamma radiation.   Gas Detector Features no false alarms utilizing stable, field-proven sensor technologies Highly selective for specified target Gas No zero drifts with changes in ambient conditions Self-Calibration adjusts span based on sensor life curve Non-Intrusive field Calibration using magnet LCD display: 12 characters x 2 lines. Provides user interface with magnetic switches Not affected by temperature -40 deg. C to +50 deg. C Offsite sensor calibration with sensor embedded memory chip Peak value, 15-min. , Remaining Sensor Life, Replace Sensor indication and number of days since last gas calibration Optional Relay Module in same enclosure with low, mid, high and fault relays; rated 10 Amps. Gas alarm relays can be programmed latching or non-latching, energized or non-energized, time delays Available suitable for SIL 2 environments Continuous Advanced Diagnostics   Sensor Technology Electrochemical, Photo-Ionization,Catalytic, Infrared, Solid-State Detection Range Varies with gas type  Resolution 0.01 ppm; 0.1 ppm; 1 ppm;0.1 %Volume; 1 %LEL(depends on gas type) Response Timeless than 30 sec. 90%  Recovery Timeless than 30 sec. 10%  Temperature Range-40 deg. C to +50 deg. C  Humidity Range10 - 90% RH, non-condensing  Zero Driftless than 1% of full-scale typical Power Requirements12-30 VDC 1.08 - 1.82 W (24 VDC)  Outputs4-20 mA Standard Modbus RTU Option Relay Module Option Sensor Service Life>2 years typical under normal conditions, depends on sensortype and conditions

SKF offers a range of basic products designed for the user who wishes to begin a low-cost condition monitoring programme. Basic instruments assess and report on temperature, oil condition, speed, bearing condition, shaft alignment, noise, vibration and more. SKF basic condition monitoring products include: SKF MicroVibe P   Low-cost, compact, lightweight and feature-rich, the SKF MicroVibe P is the first vibration test and measurement instrument designed to be used with a Personal Data Assistant (PDA). SKF Vibration Pen Plus SKF Vibration Pen Plus is a pocket instrument that provides a low-cost multi-parameter approach to condition monitoring. Portable instruments Our portable monitoring solutions enable maintenance personnel to identify problems on the spot, and collect dynamic machine data which can be analysed offline using our @ptitude Monitoring Suite of software products. SKF offers a wide variety of portable condition monitoring hardware, including: SKF Microlog® Analyser MX series portable maintenance instrument The Microlog MX is, in effect, several instruments combined in a single, fully ruggedised, handheld device. The MX series provides users the flexibility to choose from a range of different testing and analysis applications. The MX modular analysis tools include: A conformance check module to assess machinery health in accordance with industrial standards (ISO, BS, API etc) or enable users to define their own standards. An easy to use FFT analyzer with on-screen phase vector readout A stand alone balancer (static & dynamic couple, single or dual plane) A bump test for determining resonance A digital signal recorder Run up, coast down

Used Computer Monitor, Computer, Laptop, Bio Organic Fertilizer

Led Monitor, Computer Motherboard, LCD Monitor

gas monitors, Alarm System, heat detection, Gas Sensors, foam equipment

Ecg Monitor, Blood Pressure Monitor, Multipara Monitor

Dual O2 Monitor, Oxygen Gas Analyzer, Oxygen Analyzer Monitor

monitor, Computer, Computer Parts, key board, cpu

condition monitoring, Single Row Cylindrical Roller Bearings, Hybrid Bearing