Crusher Spare Parts Dealers in Chhiri, Vapi

• Pressure: Pressure: .10 - 200 mm W.G.P
• Capacity: 1000- 50000 m3/hr

Application : For General ventilation, fume & vapour, smoke & dust exhaust process drying & Cooling, dusty air or material conveying.

• Power: 1 HP

We have a good rapport with the leading names in the industry from whom we source the basic material, required for manufacturing superior grades products. Combining our expertise with the technology that we possess, we take the responsibility to deliver utmost quality FRP Blower to the customers.   Features : Long working life Energy efficient Less maintenance Without motor

    Felt and Wire Auto Guide Systems are designed to keep the wire running properly in the center of the roll over which it travels. If you loose control over your wire felt or fabric, the cost incurred in damaged clothing is high. Lost production can make such accidents extremely irritating and costly. Installing the reliable and well proven automatic wire and felt guiding system represents an easy way and inexpensive way to avoid this problem. It comprises of an actuator and pneumatic controller with ceramic coated palm assembly, the Auto Guide works without sliding surfaces.   Advantages : 1. Avoid Fabric run off 2. Minimize fabric edge wear 3. Reach Maximum fabric wear life 4. Reduce sheet breaks 5. Optimize paper productivity   Salient Features : 1. Immediate response to any movement of the clothing in the cross machine direction without overcompensation 2. Very few moving parts and little need for maintenance work. 3. Moving parts are fully enclosed for complete protection against water, fiber and dust 4. Extremely low compressed air consumption, normal working pressure @ 3.0 kg/cm2 5. Suited for installation in any position- horizontal, vertical, inclined or even upside down. 6. Easy to install and operate. 7. No adjustment required before start up 8. Built in manual over ride  

Precision Turbine Blowers are manufactured for high air suction need of industrial process at the same time required uniform flow of air with filtretion of dust, these blowers are made with various capacity from 0.5 HP to 5 HP For Enquiries related to Centrifugal Suction/Blow Blowers Pl. send below inputs: Material of cunstruction & End use Volume in C.F.M. or M3/Hr. Static Pressure in Inches or M.M. of Water Gauge. Operating Temperature. Direction of rotation and discharge. Fan arrangement. (Direct/Belt/Couple drive) Any other accessories desired.

FEATURE : • PP FRP blower manufactures item is giving low maintenance high reliable.• PP FRP blower manufactures item can simple to handle more stability .• Diminish operational cost.• Long product life. • Cost economical .• Ideal execution • Enduring • Low commotion level.APPLICATION : • PP FRP blower manufactures work procedure might be actualized in fume extraction requisitions.• Ventilation.• Cleaning.• Declassification.• Destructive gas streams • Cooling tower• Dust control• Smoke control.• Grain drying.• Pp frp centrifugal blower manufactures• Methodology could be utilized within pollution control requisitions.

• Certification: ISO 9001:2008 Certified
• Color: Black, Blue, Green, Yellow
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic
• Power: 1-3kw, 12-15kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Warranty: 1year, 2year
• Presssure: High Pressure, Low Pressure, Medium Pressure

  Blowers are used for low pressures, generally, less than 3.447 KPa. Rangoli Fibre Reinforced Pvt. Ltd. [GRACE™] are manufacturing centrifugal type blower. The same is used for ventilating work, moving large volumes of air or gases through ducts, conveying material suspended in the gas stream, removing fumes etc. The amount of static pressure developed depends upon the ratio of the velocity of the air leaving the tip of the blades. Operating efficiency of fans ranges from 40 % to 70 %. The performance of the centrifugal fan varies with changes in conditions such as temperature, speed and density of the gas being handled. GRACE™ [RANGOLI] can design and manufacture Blowers with different volumetric capacities and negative pressures are offered. Blowers at the optimum RPM, including blade designs / angles which insures best efficiency and hence least power consumption with minimum maintenance. The Unique feature of FRP Molded impeller is that it is light in weight which minimizes the all usual blower's mechanical problems. A complete Fume Scrubbing System can be designed to handle a gas flow up to 50,000 m3/hr with power rating up to 100 h.p. A higher gas flow rate can also be designed. Impeller of the blower is dynamically balanced at 3000 r.p.m. The shaft design is EN-8 with FRP sleeve. The bearings used will be self aligned 'SKF' or 'FAG' or any other standard make. The electric motor will be of 'Crompton' or other equivalent make.

• Output Power: 0.2 Kw To 7.5 Kw
• Max Flow: 530 M3/Hr (312 Cfm)
• Max Pressure: 570 Mbar (228 In H2o)
• Max Vacuum: 440mbar (174 In H2o)
• Stages: Single/Double Electrical

Industrial BlowersThe Ring Blowers are suitable for all those applications requiring considerably higher pressure. Side Channel exhausters are used in all those applications requiring an operating vacuum higher than the one achievable by a fan, but not as to require the use of a vacuum pump. The rotating parts are not in contact with the casing. Therefore, no friction during operation and thus no internal lubrication is necessary. The other main features are:       Higher pressure ratio     100% oil-free air     Low noise level (65dba Normal, 85 dba Max.)     140% Overload protection     ±10% Voltage fluctuation tolerance     Rated for continuous duty     IP 54 Protection     Class F insulation     Pressure die casted body, impeller & rotar     Low temperature rise     No, vibration, and therefore complete     Pulsation- free discharge     Cooler running, double sealed NSK (Japan) bearings  Applications:The Ring Blowers are suitable for very wide field of application some of them are:      Pneumatic conveying of solids/liquids     Vacuum transfer of components/sheets     Blowing away debris/sucking away debris     Sorting/counting of cards/envelopes/papers     To suck debris/gases from clean rooms/enclosed spaces/tunnels/laboratories     To agitate and aerate water in spa/whirlpool/swimming pool/fishing tanks/aqua culture Tanks     Furnace fuel burning     Beverage bottling/labeling drying     Medical/dental suction units 

Centrifugal Blower, PANNEL COOLING FAN

We are instrumental in bringing to the clients Medium Pressure Blower that is widely preferred by buyers worldwide. The Medium Pressure Blower range is extensively used for fume extracation, long distance ventilation, fiteration, pneumatic conveying, etc. we offer the Medium Pressure Blower at market leading rates to clients.

plastic blowers, FRP Blowers, frp filament wound tank, frp fittings

Single Inlet Single Width Blower, Double Inlet Impeller, Axial Flow Blower

PP & FRP Centrifugal Blowers, PP FRP Pickling Tanks, Frp Centrifugal Blowers

We are one of the well established manufacturer a wide range of air blowers

thermacol lead bonding, Ball Mill, Washers, Vessels, Rubber Lining

Steel Cutting Machine, industrial vibrator, Metal Rollers, basket centrifuge

heat blower, pharmaceutical vessel, Chemical Blowers

Electric Blowers, FRP Storage Tank, Frp Tank, gas scrubber filter, Grating

metallic expansion bellow, Cement Grouting Hose, Hot Water Rubber Hose

Air Blowers, stainless steel tanks, Vessel, pp pump, ppfrp blower

Diatel PP Tower Packing, Portable Submersible Pump

PP FRP Blower, Hdpe Tank, pigment, cobalt octate, Frp Brush, catalysts

Lead Bondings, SS Reactor Vessels

Air Blowers, air boosters, Air Dryers, Air Receivers, screw air compressors