Industrial Oil Dealers in Imran Nagar, Vapi

• Purity: 98%
• Packaging Type: Barrel /Tanker
• Form: Liquid
• Packaging Size: 210 Liter
• Color: Black
• Viscosity: 180 CST
• Density: 950-960 at 15 Degree C
• Brand: HPCL
• Sulfur Content: Max 2%
• Sediment: 0.5%

• Form: Liquid
• Purity: 99%
• Density: 0.92-0.99 G/ml
• Ash Content: 0.1%
• Water Content: 1.0%
• Sulphur Content: 4%

FURNACE OIL (FO) Definition: A dark viscous residual fuel obtained by blending mainly heavier components from crude distillation unit, short residue and clarified oil from fluidized catalytic cracker unit. Nomenclature: Bunker fuel, furnace oil, Fuel oil are other names for the same product. Though Fuel oil is a general term

• Application: Industrial
• Country of Origin: India
• Viscosity: 350 CST
• Temp. Range: 54°C to 310°C
• Product Code: 300CST
• Appearance: Transparent
• Storage: Cool & Dry Place

Furnace Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkaline, cyclo-alkaline and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil i.e. heavier than gasoline and naphtha.   Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 - 1982 for fuel oils, grade MV2.

Furnace Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkaline, cyclo-alkaline and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil i.e. heavier than gasoline and naphtha.  Furnace Oil is a residual fuel (motor spirit / gasoline, high speed diesel and kerosene are distillate fuels). It is a dark, viscous liquid at room temperature. It is a complex mix of hydrocarbons with carbon atoms ranging mainly from 20 to 55. It is produced by blending residues from various refinery processing units and diluting with middle distillates.   SPECIFICATION   Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 - 1982 for fuel oils, grade MV2.   VISCOSITY   Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization.        

• Grade: Industrial
• Packing: Drum

Light Diesel Oil, fuel oils

MG Kraft Paper

MG Kraft Paper

Rubber Processing Oil, Cutting Oil, Drawing Compound, Gear Oil, Greases

MG Kraft Paper, Kraft Paper-RKF-01, Kraft Paper-RKF-02, Corrugated Boxes

Hydraulic Oil, Industrial Lubricant, Gear Oils, Thermic Fluid Oil

Cutting Oils, Compressor Oils, Engine Oils, High Temperature Grease

Hydraulic Oil, Industrial Grease, two wheeler oil, grease oil, Caster Oil

Used Cooking Oil

Mineral Turpentine Oil

MG Kraft Paper, Packaging Kraft Paper, Lignite Coal, Thermal Coal

Mineral Turpentine Oil, ldo, llp, Recycled Base Oil, Black Oil

Marine Oils, condition monitoring, Linear Guides, Ball And Roller Screws

Fuel Oil

Liquid Chlorine, chlorosulphuric acid

Hydraulic Oils, Industrial Lubricants, ie gear oil, Spindle Oil

industrial oils, Transformer Oil