Industrial Oil Dealers in Vapi

• Color: Black
• Application: Industrial
• Packaging Type: Barrel, Drum
• Packaging Size: 10ltr, 50ltr, 5ltr
• Form: Liquid

Get access to a wide range of Industrial Oil. Our range of Industrial Oils includes Quenching Oil 39-85 Oil, Compressor Oil 32-320 Oil, Hydro AW 68-460 Oil, Machine Oil 32-460 Oil, Rust Protector 274-76 Oil, Soluble Cutting Oil, Spin Oil, and Therm Super 500-600 Oil. These Industrial Oils are used in different machinery for various applications.

• Form: Liquid
• Purity: 99%
• Density: 0.92-0.99 G/ml
• Ash Content: 0.1%
• Water Content: 1.0%
• Sulphur Content: 4%

FURNACE OIL (FO) Definition: A dark viscous residual fuel obtained by blending mainly heavier components from crude distillation unit, short residue and clarified oil from fluidized catalytic cracker unit. Nomenclature: Bunker fuel, furnace oil, Fuel oil are other names for the same product. Though Fuel oil is a general term

• Color: Yellow
• Application: Pumps,Motors,Hydraulic Systems
• Feature: Durable, Good Shelf Life, Light Weight
• Packaging Type: Plastic Box
• Type: Hydraulic Fluid
• Country of Origin: India
• Viscosity: 32,46, 68 CST
• Temperature Range: 53°C to 250 °C
• Product Code: HSO-310

Furnace Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkaline, cyclo-alkaline and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil i.e. heavier than gasoline and naphtha.   Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 - 1982 for fuel oils, grade MV2.

• Packaging Type: Barrel, Drum
• Form: Liquid
• Brand: Gandhar
• Usage/Application: Rubber Industries
• Aniline Point: 78 Degree Celsius
• Purity: 98%
• Flash Point: 160 Degree Celsius
• Density: 0.8900 gm/ml at 25 Degree Celsius

Furnace Oil, Corrugated Box, PAPER TUBES, wooden pallets

• Grade: Industrial
• Packing: Drum

Furnace Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkaline, cyclo-alkaline and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil i.e. heavier than gasoline and naphtha.  Furnace Oil is a residual fuel (motor spirit / gasoline, high speed diesel and kerosene are distillate fuels). It is a dark, viscous liquid at room temperature. It is a complex mix of hydrocarbons with carbon atoms ranging mainly from 20 to 55. It is produced by blending residues from various refinery processing units and diluting with middle distillates.   SPECIFICATION   Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 - 1982 for fuel oils, grade MV2.   VISCOSITY   Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization.        

Gas Engine Oil, Transmission Oil, Chassis Grease, Ap3 Grease, EP2 GREASE

MG Kraft Paper

MG Kraft Paper, Kraft Paper-RKF-01, Kraft Paper-RKF-02, Corrugated Boxes

MG Kraft Paper

Rubber Processing Oil, Cutting Oil, Drawing Compound, Gear Oil, Greases

Industrial Lubricant, Gear Oils, Thermic Fluid Oil, neat cutting oils

Furnace Oil, fuel oils

Furnace Oil, ldo, llp, Recycled Base Oil

Industrial Grease, two wheeler oil, grease oil, Caster Oil, refrigerant oil

thermic fluid, Boiler, Electrostatic Precipitator, Steam Turbine

Gear And Engine Oil, Engine oil

MG Kraft Paper

Cutting Oils, Compressor Oils, Engine Oils, High Temperature Grease

MG Kraft Paper, Packaging Kraft Paper, Lignite Coal, Thermal Coal

Furnace Oil, Liquid Chlorine, Sulphuric Acid, chlorosulphuric acid

Turmeric waste oil

Used Cooking Oil

Hydraulic Oils, Industrial Lubricants, ie gear oil, Spindle Oil

calcium multipurpose grease, Gas Engine Oil, Grease, lithium

industrial oils

Furnace Oil