Media Filter Dealers in Balitha, Vapi

• Color: Blue
• Usage: Textile Industry, Water Filter, Remove Small Particles In Water
• Voltage: 110V
• Filtration Capacity: 10 Microns
• Flow Capacity Range: 50 Cfm, 100 Cfm, 150cfm, 200cfm
• Filter Dimensions: 70X70X60cm
• Type: Drum Filter
• Warranty: 1 Year
• Country of Origin: India
• Weight: 1000-2000kg
• Automatic Grade: Semi Automatic
• Driven Type: Mechanical

Sand filtration is a frequently used very robust method to remove suspended solids from water. The filtration medium consists of a multiple layer of sand with a variety in size and specific gravity. A sand filter has a High dirt holding capacity TSS / m2 of sand surface. When the filters are loaded with particles, the flow direction is reversed and the flow is increased to clean the filter again . This step is called a backwash.       Carbon filter  is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical absorption.   Each particle/granule of carbon provides a large surface area/pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One pound (450 g) of activated carbon contains a surface area of approximately 100 acres (40 Hectares).   Feature: ·         Proper Sampling Points. ·         With / With out Skid Mounted ·         Easy in operation ·         No skill man power required ·         Easy to relocate ·         Plug & Play System ·         Proven Technology. ·         High quality design and materials of construction built to last ·         Modular design capability for rapid mobilization and reduced field set-up cost ·         Low maintenance – automated design and controls ·         Reduced environmental footprint – low energy and chemical consumption ·         Fully customizable to a variety of water sources and customer requirements ·         Reliable ·         Sustainable   ·         Economical

• Vessel Diameter: Max 600mm
• Vessel Height: Max 1200mm
• Voltage: 440V
• Frequency: 50 Hz
• Usage/Application: Industrial
• Flow Rate: 4000 m3/hr
• Brand: NeoTech
• Automation Grade: Semi-Automatic
• Body Material: Mild Steel
• Phase: 3 Phase

Pressure Sand Filter consists of a pressure vessel-this could be either vertical or horizontal-fitted with a set of frontal pipe work and valves, graded silica quartz sand supported by layers of graded under bed consisting of pebbles and gravels, a top distributor to distribute the incoming water uniformly throughout the cross section of the filter, and an under drain system to collect filtered water. Raw water flows down wards through the filter bed and as the suspended matter- which has usually been treated by addition of a coagulant like alum- is retained on the sand surface and between the sand grains immediately below the surface. There is steady rise in the loss of head as the filter process continues and the flow reduces once the pressure drop across the filter is excessive. Advantages and Features 1. Efficient Turbidity and TSS Removal 2. Filter up to 20 – 30 Microns 3. FRP, CS, MSEP, SS Vessel available 4. ASME Pressure Vessel is also available 5. Standard and effective silica quartz sand media 6. Low Pressure drop across the vessel 7. Air scouring available for high flow pressure vessel 8. Automatic Valves are provided as per customer need 9. Manual, Semi Automatic and Automatic features are provided

Pressure Sand Filter. It is used for effective removal of color, odor, organic contamination and Chlorine in water. The sand also removes certain chemicals that are dissolved in water passing through a filter containing GAC by trapping the chemical in the GAC.