Pressure Gauges Dealers in Vapi

• Dial Size: 100mm
• Material: Stainless Steel
• Application: Industrial
• Brand Name: baumer
• Movement Material: bottom
• Measuring Range: 0 to 350 c

• Accuracy: ±0.3% of Full Scale at +25°C
• Display of: Pressure or Differential Pressure
• Display: Full Icon LCD
• Pressure Range: 0-5psi or 0-15psi or 0-30psi or 0-100psi
• Max. Pressure Range: 0-20psi or 0-30psi or 0-60psi or 0-150psi
• Repeatability: ±0.2% (±0.5% Max.)
• Response Time: 0.3 Seconds
• Combined linearity and hysteresis: ±0.29(Max ±1.0)%FSO
• Unit Selection: bar, mbar, psi, kPa, inHg, mmHg, ozin2, inH2O, ftH2O, kgcm2
• Special Functions: Data Hold, Backlight, Auto Power Off
• Battery: 9V Battery
• Memory Recall: Max. /Min.
• RS232 Output: Provided (Software & Cable Optional)
• Serial Format: Baud rate 2400 Baud, 1 Stop bit, 8 Data bits. PXXX.XX
• Cabinet Size: 72 x 182 x 30 mm
• Carrying Case: Provided

• Material: ss cs
• Brand Name: SMIPL

• Type: Magnehelic
• Material: Metal
• Color: Black & White
• Shape: Round

Mounting - A single case size is used for most models of Magnehelic® gages. They can be flush or surface mounted with standard hardware supplied. Although calibrated for vertical position, many ranges above may be used at any angle by simply rezeroing. However, for maximum accuracy, they must be calibrated in the same position in which they are used. These characteristics make Magnehelic® gages ideal for both stationary and portable applications. A 4-9/16 hole is required for flush panel mounting. Complete mounting and connection fittings, plus instructions,are furnished with each instrumentSpecifications : Service : Air and non-combustible, compatible gases (natural gas option available). Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi. Wetted Materials : Consult factory. Housing : Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test. Accuracy : ±2% of FS (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C). Pressure Limits : -20 in Hg to 15 psig† (-0.677 to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar). Overpressure - Relief plug opens at approximately 25 psig (1.72 bar), standard gages only Temperature Limits - 20 to 140°F* (-6.67 to 60°C). -20°F (-28°C) with low temperature option. Size - 4 (101.6 mm) diameter dial face. Mounting Orientation - Diaphragm in vertical position. Consult factory for other position orientations. Process Connections : 1/8 female NPT duplicate high and low pressure taps - one pair side and one pair back. Weight : 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g). Standard Accessories : Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rubber tubing adapter, and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.) Agency Approval : RoHS. Note : -SP models not RoHS approved.  

• Dial Size: 2.5 inch / 63 mm
• Brand Name: Baumer
• Pressure Range: 0 to 10 bar
• Display Type: Analog
• Use: Liquid
• Pressure Type: Gauge Pressure
• Connection Type: NPT
• Connection Size: 1/4 inch
• Dial Type: Dry
• Measuring Principle: Bourdon Tube
• Mounting: Bottom
• Material of casing: Stainless Steel
• Accuracy Class: 1.6
• Pointer Material: Aluminium Black
• Window Material: Safety Glass
• Wetted Parts: Brass

• Accuracy: ±2.5% of F.S
• MODEL NUMBER: MODEL PDD
• Standard Follows: EN 837-3
• Nominal Dial Size (mm): 100, 150
• Range: 0 to 16 kg/cm²
• Mounting Type: Bottom / Back / with Bracket
• Connection Size: 2 x 1/2
• Wetted Part: Diaphragm (Duratherm) - AISI 316L SS
• Case & Bezel: Bayonet AISI 304 SS
• Pointer: Aluminium, Black
• Movement: Brass Nickel Plated
• Window (Glass): Shatterproof Glass
• Static Pressure: Max up to 20 kg/cm²
• Overload: Max up to 20 kg/cm²
• Options: With Chemical Seal Other connection available With Swivel Adaptors

• Pressure Range: -1 to 600 bar
• Usage: Process Industries
• Display Type: Digital
• Power Source: 2 AAA Battery
• Display Digits: 4
• Digit Size: Dial 80 mm Diameter
• Pressure Type: Gauge Pressure
• Connection Type: NPT
• Connection Size: 1/4 inch
• Dial Type: Dry

LUX-TG-1001 - TEMP Bimetal thermometer- Temperature gauge       Principle Bimetallic thermometer’ temperature element is made of bimetallic strip   which is bent into a coil, one end will expand when it is heated, meanwhile   drive the pointer rotate, which will show the corresponding temperature of   medium.       Features >Measure process temperature of liquid or gas  >Temperature element: bimetallic strip  >Temperature range: -80 ~ 40 ℃; -40 ~ 80 ℃; 0 ~ 50, 100, 150, 200, 250, 300, 400, 500℃  >Accuracy: 1.6% of Calibration range  >Dial size: 65mm, 100mm, 150mm, 200mm  >Case material: SS304 / SS316  >Process connection material: SS304 / SS316

Dial Gauges are one of the most commonly used instruments in all types of metal working industry. Three main types of dial gauges - plunger type, lever type and back plunger type - are supplied. Dial gauges are a combination of excellent metrological attributes, superior raw materials and workmanship. To meet diverse requirements of customers, wide variety of dial gauges in different readings, different travels, different mounting styles and conforming to different National & International calibration standards are produced.

• Dial Size: DN50 / DN63
• Pressure Range: 0 - 30 psi, 0 - 60 psi, 0 - 100 psi, 0 - 150 psi, 0 - 220 psi
• Mounting pattern: Direct, Bottom connection
• Process connection: Twin connection
• Execution: Dry

With the assistance of our modern transportation facilities, we are able to deliver the orders on time. Following strict industrial norms and guiding principle, we strictly conduct quality examinations for the raw materials and the final product range. Thus, you can rely on us.

• Type: Reflex Level Gauge
• Material: SS / CS
• Brand Name: nema
• Fluid Type: oil / water / gas
• Centre Distance: 300mm to 6000mm
• Measuring Range: 500mm to 6000mm
• Pressure Type: High Pressure
• Drain Connection: Needle Valve
• Operating temperature: -20 to 400° C
• Operating Pressure: 20bar to 200 bar
•  :  

• Dial Size: 6 inch / 150 mm
• Brand Name: Waaree
• Display Type: Analog
• Material of casing: Stainless Steel
• Mounting: Bottom, Back

low pressure gauge, Hydraulic Pressure Gauge, mud pressure gauge

Stainless Steel Pressure Gauge, Magnehelic pressure gauge

Diaphragm Gauge, Industrial Valves, pressure gauge, Temperature Gauge

gauge blocks, Gloss Meter, Smoke Meter, Non contact Tachometer

Pressure Gauges, Thermocouple, Industrial Heaters, Rotameters

Weather Proof Pressure Gauge, Gas Actuated Thermometer

Pressure Gauges, Controller, indicator, Industrial Heater, RTD Sensor