Check Valves Dealers in Vapi

• Material: Mild Steel
• Finishing: Polished
• Color: Silver
• Automatic Grade: Automatic
• Packaging Type: Carton
• Type: Non Return Valve
• Media: Water

• Material: Metal
• Application: Fire Hydrant Use
• Color: Goden-red
• Feature: Blow-Out-Proof, Easy Maintenance
• Automatic Grade: Automatic
• Pressure: High Pressure
• Number Of Way: Double Way

• Body: ASTM - A 126 Grade B (Gry Iron)
•  : ASTM - A 216 Grade WCB (Cast Steel)
•  : ASTM - A 536 Grade 65 - 45 - 12 (Ductile Iron)
•  : ASTM - A 351 Grade CF8 / CF8M / CF3M / CD4MCuN
• Disc: ASTM - A 126 Grade B (Gry Iron) + Powder Coated
•  : ASTM - A 216 Grade WCB (Cast Steel) + Powder Coated
•  : ASTM - A 536 Grade 65 - 45 - 12 (Ductile Iron) + Powder Coated
•  : ASTM - A 351 Grade CF8 / CF8M / CF3M / CD4MCuN
•  : S.G. Iron With Toffon / Powder / Nylon Coated & Rubber Line
• Seat: Nitnle / EPDM / Viton / Hypelon / silicon / Neopren
• Shaft: AISI 410 / AISI 304 / AISI 316 / AISI 316L
• Valve Type: Centric Disc Butterfly Valve With Single Piece Rubber Lined Body
• Body Type: Short Water Type Double Flange
• Seat Type: Integrally moulded with the body (Renewable Seat)
• End Connection: Water type Double Flange Suit to 150#, Table 'D' , Table 'E' & IS 6392 Table 11 (PN 10 / PN 1.6)
• Pressure rating: PN 10 / PN 16 / (PN 20 On Request)
• Oper. Temp. Range: -20° C To 80° C For Nitnle Seat (Depending on MOC)
• Seal Leakage: Tight shut off
• Operation: Lever Operated / Gear Operated / Chain Wheel Operated / Extended shaft
• Design And Manufacturing: API 609 Category A/IS : 13095 / BS EN 593
• Valve Face To Face Dimension: Short Water As Per ISO 5752 TAB 5 / API 609 Category A / ISO 5752 TAB 1 (BS 5155)
• Flange Standard Conformity: ASME B 16.5 / ASME B 16.47 Class 150, BS 10 TAB D, E & F
• Inspection & Testing: API 598 / BS EN 12266 - 1
• Top Flange Drilling: ISO 5211

Easy structures and short dimensions are the remarkable features of dual plate check valves They are to be directly mounted between DIN flanges (PN 10, PN 16 or ANSI 150).   Dual plate check valves require a low opening pressure. The resulting opening power directs the stems against the spring and the valve’s weight power, so that the media is released. If the initial pressure is higher than the entrance pressure, the valve closes and is sealed by the O-ring to protect it from the media.   Dual plate check valves type  are designed to block media on one side of the pipe within allowable pressure and temperature limits  and to be installed in a pipe system only. They are only to be used with media, which the material and the seals are resistant to. They are not suitable for media with solid components.   Installation compared to other type of check valve.  The Dual Plate Check Valve employs two spring-loaded plates hinged on a central hinge pin.   When the flow decreases, the plates close by torsion spring action without requiring reverse flow. This design offers the twin advantages of No Water Hammer and Non Slam simultaneously. All features put together make the Dual Plate Check Valve one of the most efficient designs.   Power Plants Water Fertilizer Plant Chemical Plants Oil and Gas Processing Refinery Cryogenic Service   General features Design type Swing, piston, ball, dual plate, nozzle check Size ANSI 0,25” - 16” Pressure ANSI 150 lbs - 4500 lbs Size DN DN 6 - DN 400 Pressure PN PN10 - PN 400 Design temp. minus 196 C up to 816 C End connections Flanged, Wafer type, BW, SW, HR, HUB Options Pressure seal cover, soft and metal seat Design features Retainer less design Design & testing All available international standards according to API - EN - ISO

• Material: Gun Metal LTB - II & Stainless Steel
• Performance Test :: Hydraulic Test : 21 Kgf/cm2

Material : Gun Metal LTB - II & Stainless SteelSize : 63 mm, 52 mm, 38 mm dia63 Female single outlet type - "A"63 Female double outlet type-"B"Performance Test : Hydraulic Test : 21 Kgf/cm2

• Material: Stainless Steel
• Valve Size: 25mm
• Pressure: 20 Kg/cm2
• End Connection: Butt Weld
• Shape: Round
• Media: Water

• Size: 1.5" TO 20"

We offer pulp gate valves are fully lugged type, fitted with C. I. Or M. S. Or S. S. 304 or 316 body. Also available lever or Pneumatically operated. Used in paper mills.

Motor, Sandpiper Containment Duty Pumps, metallic pump

pulp gate valves, Knife Gate Valves

Hydraulic High Torque Motor, Pressure Cartridge Valve, Hydraulic scale

DI Pipes, Wall Tiles

Non Return Valves, Automotive Tyres

Testable Pneumatic Check Valves, Automatic Bypass Valves

double outlet type landing valve, Four Way Fire Hydrant, Storze Couplings