Water Testing Equipment Dealers in Vapi

• Brand Name: Hanna
• Weight: 85 g
• Dimensions: 63 x 40 x 26 mm (6.4 x 1.6 x 1.0 inch )
• Temp.Compensation: Automatic from 0 to 50 Degree C (32 to 122 Degree F)
• Battery Type / Life: 4 x 1.5 V / 100 hours
• Auto Shut-off: After 8 minutes

Karl Fischer titration is a widely used analytical method for quantifying water content in a variety of products

• Country of Origin: India
• Type: Portable Dissolved Oxygen Meter
• Material: Plastic
• Application: Industrial
• Display: 13 mm
• Resolution: 0.1 mg/L
• Accuracy: +- 0.4 mg/L
• Battery Type: 006P DC 9V battery
• Measurement Range: Dissolved Oxygen - 0 to 20.0 mg/L.
• Sensor Temp. Compensation: Automatic from 0 to 40 Degree
• Panel adj knob: ZERO knob, CAL knob
• Power Consumption: Approx. DC 3.5 mA
• Main instrument: 131 x 70 x 25 mm
• Oxygen probe: 190 mm x 28 mm
• Probe cable length: 4 Meter

• Brand Name: HM original
• Range: 0 to 19990 PPM
• Measuring Range: PPM
• Is It Water Proof: Non Water Proof
• I Deal In: New Only 
• Type Of Ph Meter: Hand-Held
• Usage/Application: Measurement
• Model Name/Number: T-3

Water is required to be cooled for many processes, for example air conditioners, manufacturing processes or power generation, etc. A cooling tower is used to reduce the temperature of a water stream by extracting heat from water and emitting it to the atmosphere. Cooling towers make use of evaporation whereby some of the water is evaporated into a moving air stream and subsequently discharged into the atmosphere. As a result, the remainder of the water is cooled down significantly. Water by its basic nature is corrosive. Therefore cooling systems are plagued with corrosion. Many factors affect corrosion rates in a given cooling water system. The presence of dissolved gases, chloride and sulfate levels, pH, alkalinity, scaling tendency, and protective ions such as calcium, magnesium, phosphate nitrate, and silicate must all be taken into consideration. The first step to control is detection therefore regular monitoring of the above is absolutely essential.

• Type: Tds Meters
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Application: Tds Monitor
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Material: Aluminum, Brass, Cast Iron, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Low Power Comsumption, Stable Performance
• Warranty: 1Year, 2Years

• Feature: Accuracy , Durable .
• Measure Range: 0 - 19,990 PPM
• Usage/Application: Laboratory , Industrial
• Accuracy: +- 2%
• Temperature Range: TEMP. -50 TO 70C-50 To 70 Degree C
• LC: 10 PPM

We are offering Dissolved Oxygen Meter. Dissolved Oxygen Laboratory Bench Meter Model HI 2400 HI 2400 is a dissolved oxygen bench top meter with automatic calibration and % or mgL (ppm) measurement range. The measurement is automatically compensated for altitude and salinity compensation based on the user settings for altitude up to 4000 m and 40 gL for salinity. Measurements are automatically temperature compensated by using the polarographic DO probe with built-in temperature sensor. This probe features screw cap membranes for easy replacement. With a built-in logging function, measurements are stored in non volatile memory, and can be transferred to a PC through the USB port using the optional HI 92000 software and HI 920013 USB cable. The software is provided with an exclusive online guide of all the commands available and allows data printing, plotting and exporting.

Bacteria Test Kits, Yeast and Fungi Test Kit, Vibrio Cholera Test Kit

PH Conductivity TDS Salinity MV Temp Meter, pH Sensor General Purpose

Tds Meters, digital temperature meter, Binocular Microscope

Water Iron Testing Kit, Heat Treatment Plant