Water Treatment Plant Dealers in Vapi

• Automation Grade: Automatic
• Material: Stainless Steel
• Voltage: 380 V
• Power Consumption: 2 HP
• Capacity: 3000 LPH
• Surface Finishing: Polished
• Frequency: 50 Hz
• Brand: Fresh N Pure

The surface aerator is a vertical shaft aerator which provides a mechanical means of oxygen transfer to sewage or industrial effluent. Manual or any required degree of automatic control can be provided including adjustment of aeration intensity by dis-solved oxygen monitoring. It can be mounted on conventional bridges, on tripods with light access bridges or floating. They can be mounted on configuration thereby offering a broad range of treatment capabilities from small communities to major installation. It provide sufficient oxygen input and maximum mixing characteristics with a minimum expenditure of power. The proven operating characteristics mean that the installations are simple, inexpensive and efficient. The process starts with the oxygen generation of the fluid which promotes the cultivation and reproduction of micro-organisms which carry out the treatment process by breaking down organic matter. Oxygenation also re-establishes dis-solved oxygen levels in thte final effluent in order to sustain plant and animal life when discharged into rivers and lakes. Vertical shaft aerators achieve oxygen transfer by developing a large interface between air and liquid so that oxygen can diffuse from the air into the liquid. In achieving this it is necessary to prevent local build up of oxygen concentration by promoting good mixing within the liquid. Excellent mixing qualities in many applications of slow speed surface aerators the function of the aerator is not just limited to introducing oxygen into the water. Also, a part of the propulsion and mixing has to be provided by the surface aerator. That is one of the reasons why the characteristic conical shape is noticeable in the design of the blades. This is the source of the pump function which is necessary for creating good mixing conditions inside the basin. For oxidation ditches this results in excellent propulsion.

CHILLING PLANT EQUIPEED WITH HERMETICALLY SEALED RECIPROCATING, SCROLL OR SEMIHERMETIC COMPRESSOR. CHILLING PLANT AVAILABLE WITH REFRIGERANTS R22, R134 A, R407C, R404A OR R410A. SYSTEMS AVAILABLE IN TANK N COIL, SHELL & TUBE, PLATE HEAT EXCHANGER OR TUBE & TUBE TYPE EVAPORATOR. SYSTEM AVAILABLE WITH WATER COOLED TYPE CONDENSER. IN BUILT WATER CIRCULATION PUMP AS PER REQUIRED FLOW RATE & PRESSURE FOR APPLICATION. EQUIPEED WITH ALL ELECTRICAL SAFETY DEVICES LIKE COMPRESSOR OVER HEAT PROTECTION, OVER CURRENT PROTECTION, OVER TEMP PROTECTION , PHASE SEQUENCE / PHASE MISSING PROTECTION, ANTIFREEZE PROTECTION. EQUIPEED WITH ALL MACHENICAL SAFETY DEVICES LIKE THERMOSTATIC EXPANSION VALVE, SOLENOID VALVE, FILTER DRIERS, LOW / HIGH PRESSURE PROTECTION, WATER FLOW PROTECTION, LOW WATER LEVEL PROTECTION NOTE: DUE TO CONTINOUS UP-GRADTION AND DEVELOPMENT THE ABOVE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

We bring forth the best quality Softener Plant. Softener Plant is used in various residential, commercial and industrial sectors to eliminate Calcium, Magnesium and other heavy cations from water for reducing its hardness. It is precisely designed using optimum grade raw material and sophisticated technology in different specifications. We provide Softener Plant at competitive prices. Attributes : Robust construction Low maintenance High performance Longer service life

• Brand Name: vasudev
• Material: ss
• Driven Type: Electric, Mechanical
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 15-18kw
• Application: Water Purifies
• Type: Industrial Reverse Osmosis Plant
• Weight: 1000-2000kg, 3000-4000kg
• Warranty: 1year
• Country of Origin: India

• Driven Type: Electric
• Condition: New
• Automatic Grade: Automatic
• Application: Water Purifies

We understand that chemical and physical invasions can cause damage to products and hamper the quality. Thus, we ensure our products are packed securely using premium packaging materials. We make sure that our payment procedure is safe and simple. We offer our clients methods like online payment gateway, electronic funds transfer, cash, bank deposits and various others.   Capacity  - 1000 Ltr to 300000 ltr

• MODAL NUMBER: MODEL RTD05
• Sensor: Pt-100
• No. Of Element: Simplex/Duplex
• Head Extension type: Flanged
• Wire Configuration: 3 Wires
• Range: -200°C up to 400°C
• Accuracy: Class “B” As per IEC - 751 / DIN - 43760
• Sheath Diameter: 6mm, 6.35mm, 3mm, 8mm
• Sheath Material: AISI 316 SS
• Enclosure Protection: IP 65/Flame Proof/Explosion proof
• Enclosure Material: Die-cast Aluminum/ AISI 304 SS
• Process Connection: Flange as per ANSI/JIS/DIN/BS
• Immersion Length: 300mm
• Extension Length: 100mm
• Options: ATEX, CSA & FM (Enclosure)

Offers excellent threshold inhibition of inorganic salts viz .Calcium Carbonate, Calcium Sulphate, Barium Sulphate,High complexing power modifies crystalline Structure of scale forming Salts and avoids their precipitation Minimizes eliminates need of acid dosing.High hydrolytic & temperature stability

• Automatic Grade: Automatic
• Brand Name: Aaradhya Enviro Tech
• Voltage: 450 V
• Frequency: 50 Hz
• Country of Origin: Made in India
• Capacity: 500 m3/day
• Power Source: Electric

• Capacity (KLD): 500 KLD
• Application Industry: Residential & Commercial Building
• Inlet Flow Rate(m3/day): 500 m3/day
• Water Source: Industrial Effluent
• Voltage: 440V
• Warranty: 1 Year
• Power: Electric
• Country of Origin: Made in India
• Treatment Technology: Mixed Bed Bio Reactor(MBBR)
• Frequency: 50 Hz
• Phase: 3 Phase
• Automation Grade: Automatic
•  :  
•  :  

We offer dm water plant with mix bed.

Demineralisation is the process of removing mineral salts from water by using the ion exchange process.   Demineralised water also known as De-ionised water. Deionisation is a physical process which uses  ion exchange resins which provides ion exchange site for the replacement of the mineral salts in water with water forming H+ and OH- ions. Because the majority of water impurities are dissolved salts, deionisation produces a high purity water that is generally similar to distilled water, and this process is quick and without scale build up.                De-mineralization technology is the proven process for treatment of water. A D.M. Water System produces mineral free water by operating on the principles of ion exchange, Degasification, and polishing. Demineralised Water System finds wide application in the field of steam, power, process, and cooling.   Principle :                 Raw water is passed via two bed filled (ion exchange resins). While the cations get exchanged with hydrogen ions in first bed, the anions are exchanged with hydroxyl ions, in the second one. Process :                   Ion-exchange is a rapid and reversible process in which impure ions present in the water are replaced by ions released by an ion-exchange resin. The impure ions are taken up by the resin, which must be periodically regenerated to restore it to the original ionic form.   Ion Exchange Resins :                 There are two basic types of resin - cation-exchange and anion-exchange resins. Cation exchange resins will release Hydrogen (H+) ions or other positively charged ions in exchange for impurity cations present in the water. Anion exchange resins will release hydroxyl (OH-) ions or other negatively charged ions in exchange for impurity anions present in the water. There are three ways in which ion-exchange technology can be used in water treatment and purification 1.       Cation-exchange resins alone can be used to soften water by base exchange. 2.       Anion-exchange resins alone can be used for organic adsorption or nitrate removal. 3.       And combinations of cation-exchange and anion-exchange resins can be used to remove virtually all the ionic impurities present in the feed water, a process known as deionisation. Water deionizers purification process results in water of exceptionally high quality   De-Mineralisation / De-ionisation : For many industrial applications, high-purity water is essentially free from ionic contaminants is required. Water of this quality can be produced by deionisation. The two most common types of deionization are : ·         Two-bed deionization ·          Mixed-bed deionization Two bed de-ionisation :                 The two-bed deionizer consists of two vessels - one containing a cation-exchange resin in the hydrogen (H+) form and the other containing an anion resin in the hydroxyl (OH-) form. Water flows through the cation column, whereupon all the cations are exchanged for hydrogen ions. The same principle applies when considering anion-exchange.                 The de-cationised water then flows through the anion column. This time, all the negatively charged ions are exchanged for hydroxide ions which then combine with the hydrogen ions to form water (H2O). Mix bed (MB) de-ionisation :                   In mixed-bed deionizers the cation-exchange and anion-exchange resins are intimately mixed and contained in a single pressure vessel. The thorough mixture of cation-exchangers and anion-exchangers in a single column makes a mixed-bed deionizer equivalent to a lengthy series of two-bed plants. As a result, the water quality obtained from a mixed-bed deionizer is appreciably higher than that produced by a two-bedplant.                 Although more efficient in purifying the incoming feed water, mixed-bed plants are more sensitive to impurities in the water supply and involve a more complicated regeneration process. Mixed-bed deionisers are normally used to polish the water to higher levels of purity after it has been initially treated by either a two-bed deionizer or a reverse osmosis unit. Mixed bed polishing produces a water with less than 0.1 micro Siemens per centimetre   conductivity. With sophisticated design and appropriate resins, the conductivity of pure water (0.055 micro Siemens per centimetre) can be achieved. Residual silica values can be as low as 1 micro Siemens per centimetre   Feature                               ·         With 5 /10 /20 Micron PP Filter ·         With Sand / Carbon Filter ·         Heavy Duty Shell / Vessel ·         Proper Sampling Points. ·         With / With out Skid Mounted ·         Easy in operation ·         No skill man power required ·         Easy to relocate ·         Plug & Play System ·         Proven Technology. ·         High quality design and materials of construction built to last ·         Modular design capability for rapid mobilization and reduced field set-up cost ·         Low maintenance – automated design and controls ·         Reduced environmental footprint – low energy and chemical consumption ·         Fully customizable to a variety of water sources and customer requirements ·         Reliable ·         Sustainable   ·         Economical

 Effluent Treatment Plant(ETP) We offer effluent treatment plant (ETP plant), which is useful to remove the unwanted & harmful chemicals from the waste water. We are instrumental in offering our clients with effluent treatment plant equipment that are appreciated for having sturdy construction and resistance to corrosion. These ETP plant are manufactured in compliance with stated industrial quality standards and are thoroughly inspected by our quality analysts before being delivered to the clients. These are used in diverse industries and are widely acclaimed among our clients.                                                    

• Installation: Under-the-Counter/ Kitchen Sink For attachment with water coolers & refrigerators with water dispenser
• Product: Kent Excell+
• USP: Modular Design
• Technology: RO+UV+UF+TDS Controller
• Purification Capacity: 15**litres/hour
• Max. Duty Cycle: 75 Liters/Day
• Storage Tank Capacity: 7 liters hydrostatic tank
• Auto-Flushing: No
• Ro Membrane: Filmtec 1812-75 GPD
• UV Lamp Power: 11 Watt
• Min. Inlet Water Pressure: 0.3 kg/cm2
• Max. Inlet Water Pressure: 3 kg/cm2
• Input Voltage: 100-300V AC (50Hz)
• Operating Voltage: 24V DC
• Dimensions: L390 W200 H520 (mm)
• Net Weight: 10.70 kgs

We are known to be one of the leading Manufacturers and Suppliers of a commendable range of Stainless Steel RO Plant. We use the finest quality of stainless steel for manufacturing Stainless Steel RO Plant. Our Stainless Steel RO Plant is fit for industrial purpose. We offer Stainless Steel RO Plant at market leading price in quality packaging.

• Type: Water Purifier
• Application: Water Purifying
• Certification: CE Certified, ISO 9001:2008
• Color: Blue, Brown, Green, Grey, Light White, Red, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic
• Driven Type: Electric
• Power Source: Electric
• Warranty: 1year, 2years, 5years

Our company is counted amongst the foremost manufacturers & exporters, wholesalers and suppliers of high quality effluent treatment plant in india.

water disinfection system, water purification plants, Water Treatment System