Wood Coatings Dealers in Vapi

hubergroup India manufactures Wire Enamels for insulation of Copper and Aluminum conductors. These enamels cover a broad range based on Modified Polyester, Polyurethane and Polyesterimide from class B (130 degree) to class H (180 degree) and Polyamide Imide (Top Coat) which are suitable for fine and thick wires, including strips. Modified Polyester Based Wire Enamels • MITSHINE R • MITSHINE RH • MITESTER FF • MITCUT F • MITESTER MM • MITSUPER F 39 Polyurethane Based Wire Enamels • MITSOLD S 30 • MITSOLD F 30 Polyesterimide Based Wire Enamels • MITMID 35 • MICROMID 39 Polyamide Imide Based Wire Enamel • MICROTHERM 35 DC

• Type: Polyurethane Paints
• State: Liquid
• Application: Painting Use
• Application: Roller
• Packaging Type: Can
• Finish: High Gloss

• Brand: AMERICAN COLOUR
• Usage/Application: Industrial
• Packaging Size: All
• Paint Base Type: Oil Based Paint
• Finish: High Gloss
• Packaging Type: KIT
• Form Of Paint: Liquid

• Country of Origin: India
• State: Liquid
• Shelf Life: 1 year
• Drying Time: Surface Dry in 1 Hours
• Use on: Walls

Description: NEOSHIELD PU Paints are 2 part polyurethane based top coat offering good resistance to chemical, UV. These products are designed to offer best gloss retention. The product has got excellent adhesion strength and also offers a balanced aesthetic and corrosion protection. NEOSHIELD PU Paints are available in Clear / High Glossy / Semi Glossy varieties. Special products with non yellowing fetaures are also available. These products cure at Room temperature and provides excellent flexibility, toughness, good abrasion, chemical & UV resistance. Surface Preparation: Abrasive blasting to Sa 2 ½ Swedish standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3. The surface should be absolutely dry, moisture and oil free before primer application. And for Application on Primer scuff with 100 no type’s emery paper for proper bonding and performance. Application Method: Stir the Base part thoroughly. Mix base and Hardener as per our recommended ratio, by volume, Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add suggested Thinner into mix, if required, depending on application method, and stir gently for few minutes. Stain the paint through nylon filter cloth of 300 mesh size and apply uniformly over the surface. All equipment used for above should be properly cleaned. Apply By Brush/By Conventional spray.  

We are a prominent Manufacturer and Supplier of Pu Paint that widely used in various industries due to its corrosion resistant property. Pu Paint is recommended as a self - priming coat for direct adhesion on variety of substrate like MS, Aluminum, Galvanized Iron and selected plastic surfaces. Demanded for Excellent glossy appearanceColor retention propertiesProtection against Ultraviolet rays and weatheringCorrosion resistant property Recommended for Transportation IndustriesInfrastructure ProjectsLocomotivesSteel structure

Wood Coatings, Unicare Wood Preservative, Epoxy Coatings

Wire Enamel, Printing Inks, pigment, Resins, Ketonic Resins

PU Paints, Epoxy Paints, synthetic paints, chlorinated rubber paints

wire enamels, metal decoration, UV Curing Offset Inks

wire enamels, flexible packaging inks, PU adhesive

Wood Coatings, Protective Coating, floor coating, MISCELLANEOUS COATING