Fastness Tester Dealers

Application Field :The Test is intended to determine Color Fastness of Textile Material irrespective of their Composition (Cotton, Linen Silk, Man Made Fibers & Wool) and their Form (Fiber, Yarn or Fabric) to Washing. p.s.: The LABIN Digital Washing Fastness Tester can also be used for checking the Color Fastness against Drycleaning & Bleaching.Introduction :In this Test, a Specimen of Textile in contact with pieces of Adjacent Fabric (Standard Fabric) is mechanically agitated in a Standard Soap Solution (Sodium Oleate Solution), before being rinsed and dried. The change in Color of the Specimen and the Staining of the Standard Fabric are assessed with Standard Grey Scales. The Instrument used for this purpose is called Digital Washing Fastness Tester.Eqiupment : The LABIN Digital Washing Fastness Tester is supplied with : Main Bath (Made of Stainless Steel). 8 Nos Die Made Stainless Steel Test Vessels (Jars). 100 Nos Non-Corrodible Steel Balls.   MAIN BATH (Stainless Steel)The Main Bath is double walled S. S. Water Bath, which is electrically heated with Digital Temperature Controller-cum-Indicator. The gap between the walls is duly filled with special grade glass wool for proper insulation. The Bath is heated by means of two Immersion Heaters and a Capillary type Thermostat controls the Temperature. The Temperature of the Bath is indicated on a Digital Temperature Controller-cum-Indicator. The Bath has a double walled hinged lid made of stainless steel sheet. The Bath is provided with 8 nos Die Made Stainless Steel Test Vessels (Jars). In these jars the Standard Soap Solution and the Test Specimens are kept during the Test. The vessels are provided with Silicon Gaskets for water tight closing. They are held in a Stainless Steel Rotor Assembly mounted on a Stainless Steel Shaft at the Center of the Bath. The Assembly rotates at a speed of 40 r.p.m. ± 2 r.p.m. The Rotor Assembly rotates with the help of an Electric Motor and Reduction gearbox. A special Inching Switch is provided in the LABIN Digital Washing Fastness Tester for Loading and Unloading of the Test Vessels. It facilitates tremendous ease in operations.   STAINLESS STEEL BALLS (BS 1006: CO4, CO5, CO6:1990)100 Nos non-Corrodible Steel Balls of 6 mm Ø are provided with The LABIN Digital Washing Fastness Tester. These Balls are used for providing beating action during the washing operations. The Complete Unit is fabricated on a Stainless Steel Frame. All four sides of the Unit are covered with beautifully S. S. Sheets. The Complete Top of the Unit is also made of Stainless Steel Sheet. An attractive Acrylic Panel housing all the Controls is provided on the Front Right Side of the Unit. Two Water Outlets are provided on the Left Side. Top is the Overflow outlet and Middle is the Water Outlet of the Main Bath. 

• Condition: New
• Power Source: Electric
• Usage: Household, industrial, Laboratory
• Material: Steel
• Finish: Polished

Light Fastness Tester is used to determine the color fastness of textiles against sunlight. B-Tex Engineering manufactured instrument produces accurate results as it is of most reliable quality and as per the required standards. All dyed material experience change in color when exposed to daylight for a sufficiently long period because of the action of sunlight. The color fastness is denoted by the number of the light fastness standard fabric that has change color to the same extent as the test specimen. It is expressed as the numerical rating for light fastness. Features of Light Fastness Tester: An effective and essential fabric & garment testing equipment. It is used to determine the color fastness and degradation of textiles to Sunlight. This standard model comes with a 500 watt MBTL lamp. Automatic voltage stabilizer. Stainless steel clamps. Gray scale for assessing change in color & L-4 standard @ extra cost. Specifications of Light Fastness Tester: Light Source : 500W, MBTL Fading Lamp Test Chamber Temperature : Ambient to 50° C Temperature Range Control : By Water Circulation in Type �A� rectangular cells. Maximum Number of Type : 12 Nos. �A� Rectangular Cells Maximum Number of Type : 50 Nos. �C� Cylindrical Cells Maximum Space per Type : 110 x 50 mm �A� Rectangular Cells Specimen Thickness : Up to 15 mm Specimen size : 100 x 50 mm Maximum Number of Specimen :10 Nos. Working Life of Lamp : 2000 Hours Power : 220 Volts, single Phase, 50 HZ, A.C. Supply. Power Consumption : Maximum 1 KW. Water : Use of Distilled Water only in the water circulation Unit. Dimension of the Unit : 700 mm(W) x 500 mm(D) x 850 mm(H) Net Weight : 25 kg. Recommended Ambient : 20°-24°C Temperature Operating Conditions : 50%-65% Relative Humidity Humidity Control : Inserting Saturated Solution in the type �A� & �C� Cells. Technical specifications & appearance of machines are subject to change without any notice. Light Fastness Tester confirms

One of the tests for determination of colour fastness of dyed leather is the crocking test. This test is used for the determination of colourfastness against rubbing, either under dry or under wet conditions.

• Color: Blue and Grey
• Condition: New
• Warranty: Lifetime Buyback Warranty
• Certificate: ISI Certified, ISO 9001:2008 Certified
•  Type: Washing Fastness Tester
• Country of Origin: India
• Brand Name: Paramount

Washing Fastness Tester is suitable Instrument for determining the Color Fastness of Textile material irrespective of their Composition (Cotton, Linen, Silk, Man-made Fibres, Wool) and their Form (Fibre, Yarn or Fabric) to Washing/ Dry Cleaning Paramount DigiWASH i9™ (ISO) is a special equipment used to determine the Color Fastness to Washing for all types of fabric, yarn, fibre. Its main unit is constructed in high-grade 304 stainless steel. The Microprocessor based Control unit provides excellent accuracy and repeatability. The sample in contact with pieces of Adjacent Fabric (Standard Adjacent Fabric) is mechanically agitated in a Standard Soap Solution (Sodium Oleate Solution) / ECE Detergent / AATCC Detergent, before being rinsed and dried. The change in color of the Specimen and the staining of the Standard Fabric are assessed with the help of Standard Grey Scales.

The equipment is used to determine the color Fastness of textile material perspective of any compositions for example cotton, Nylon, Linen, Silk, Wool, Yarn or fiber etc. by way of mechanical hesitation of textile in contact with the piece of specified adjacent fabrics in a soap soda solution followed by rinsing and dying.The bath is having an arrangement to rotate 8 stainless steel jars containing the test solution and the test specimen above the horizontal axis at the specified speed.The bath is heated by means of 2 emersion heater and the temperature is controlled by a capillary type Thermostat, which is displayed by a digital temperature indicator and can also be set with the preset counter as per the requirement.After the mechanical hesitation the change in colour of the specimen and the standard fabric are assist by the standard grayscale.

• Type: Light Fastness Tester
• Application: Testing Fading Color
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Condition: New, Used
• Display Type: Analog, Digital
• Frequency: 45Hz
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power Source: Battery, Electric
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Warranty: 1year, 2years

• Display Type: Digital
• Surface Finish: Powder Coated
• Material: Mild Steel
• Temperature Ambient: 50 Degree C
• Power Supply: 220/240V A.C.
• Motor Power: 1/4 HP motor

This machine is basically utilized in the textile sector for knowing the wash fastness of a fabric when exposed to washing factors and water. This equipment makes use of the regular detergent formula to test the fabric sample and carries out procedures including rinsing as well as drying. The color bleeding effect as well as the waning of color is marked by a standard grey scale. This helps to know and establish the original quality and worth of the fabric in the market.Washing Fastness Tester manufacturer and produce these in compliance to the guidelines put forward by the industry. These are highly effective and offer precise determination of the wash fastness of any given fabric material. The results are depended on by our clients because of their highly consistent performance each and every time. We supply Washing Fastness Tester to our clients at admirable rates.

Utility: It is an ideal instrument for evaluating colour fastness to light using standard 500W mercury Ballast Tungsten Filament Lamp and is internally phosphor coated. Thus it combines Tungsten Spectrum rich in red, with mercury spectrum and modified by fluorescent phosphor. Thus results of MBTL Light Fastness co-relative very well Xenon Arc and daylight results. MOC: SS 304 / 316 With Electronic Temperature Controller

• Display Type: Digital
• Brand Name: V2 Digital
• Color: Blue and Black
• Material: MS Powder Coated

With the help of our modern transit facility, we are capable of delivering the orders at the desired place with ease. We are offering our entire range of products in excellent quality packaging to guarantee zero damage during transit. For this, we have hired only professional packing personnel to ensure the same.

“TECCHNO” Light Fastness Tester   Light Fasteness tester is used to determine the effect of exposure of test fabris to sunlight.This tester is used for measuring the fade ness / colour fastness of fabrics, if it is exposed to sunlight for a pre determined time under controlled condition. In this equipment, a 500 / 1000 Watts MBTL Lamp is used which is having its spectra near to sunlight. One exhaust fan on the top of the chamber to take out hot air from chamber and time elapsed counter for measurement are provided.

• Country of Origin: India
• Application: Labouratory Use
• Color: Grey
• Feature: Four Times Stronger, Proper Working
• Voltage: 220V
• Frequency: 50Hz

• • Humidity inside Chamber: 50 – 60 % RH: • Humidity Control: By Cylindrical Cells (50Nos
• • No. of Specimen Holders: 4 Nos: • Size of Specimen: 100 x 50 mm
• • Power: 230 V, Single Phase AC 50 Hz: • Power Consumption: 0.75 KWH

·         Light fastness tester or color  fastness tester  technique  to determine the color fastness  through  sun light of textiles and garments.    All dyed material experience change in color when showing to day light for a adequately long period because of the act of sunlight.   ·         The light fastness test is signified by the number of the light fastness standard fabric that change color as the test specimen. It is describe as the numerical score for light fastness.

• Type: Light Fastness Tester
• Color: Sky Blue
• Condition: New
• Display Type: Digital
• Display Type: DIGITAL
• Color: WHITE & BLUE
• Brand Name: Ikon Industries
• Certificate: Traceable to NABL
• Length: 18 INCH
• Material: MILD STEEL
• Related Standards: Australian Standard : AS 2001.4.2

• Power Source: Electric
• Material: SS
• Voltage: 220 - 380V
• Phase: Single Phase

The outside edge of heel and vamp can be made with inward fold moulding and normal heel moulding. 2. It's Suitable for moulding of toe puffs made of different materials. 3. It has models with sweeping knife and adjustable vamp function. 4. The last can be tiled for easier operation. 5. The temperature of inner and outer moulds can be regulated automatically according to different materials. 6. The inner and outer moulds are made based on the last of customers, which will head to a perfect appearance. 7. The projection lamp can provide a more accurate moulding position. 8. The adjustable clamp will achieve 100% jointing of vamp with last. 9. The adoption of environment-friendly freezing system features high speed and good result with freezing temperature up to -30o C. 10. After moulding, the linder, rubber sheet and vamp are closely jointed without crinking deformation and bubbling.

• Light Source: 500W, MBTL Fading Lamp (Mercury Blinded Tungsten Lamp)
• Test Chamber Temperature: Ambient to 50OC
• Temperature Range Control: By Water Circulation in Type ‘A’ Rectangular Cells
• Type ‘A’ Rectangular Cells: 03 Nos. supplied
• Maximum Number of Tupe: 50 Nos.
• Specimen Thickness: Up to 15mm
• Specimen Size: 100 X 50mm
• Maximum Number of Specimen: 10 Nos.
• Working Life of Lamps: 2000Hours
• Power: 220Volts
• Power Consumption: Maximum 1KW
• Water: Use of Distilled Water only in the water Circulation Unit.

Features The machine is mainly used for all kinds of colored textiles to simulate water resistance, sea water resistance, perspiration color fastness performance. Model FP-YG631 Counterweight 3500cN±1(can be customized according to user requirements, a weight) Stainless steel shelf 2 pcs Briquetting board 1500cN±1 Plate size （W*D*H) 115mm×60mm×1.5mm 40 pieces Package Size （W*D*H) 530mm×420mm×180mm Gross weight 13kg Test box two colors, each 10

Product Description   The Color Fastness Tester is constructed on a rigid fabricated frame. Rubbing is carried out by rotating a felt pad against a test specimen placed on an anvil. The felt pad is held in a rotating holder with the help of three sharp needles and can be raised and lowered with the help of a lever to bring it in contact with the test specimen.   Motion to the felt pad is given by an AC synchronous motor and belt-pulley arrangement. The sleeve in which the rod carrying the rotating holder slides is mounted on two ball bearings to give it a long and trouble-free running life. Weights are provided to apply the specified forces on felt pads for both dry and wet rubbing.The test specimens are normally kept on a flat platform under the rotating felt pad. However, for testing of finished products, provision has been made to replace the flat platform by a small circular anvil that can accommodate various finished products like shoulders of garments and shoes.   A four-digit electronic counter with re-set counts the number of abrading rubs of the felt pad. The counter operates only when the felt pad is lowered on to the test specimen.The tester is finished in shore blue metallic painting and bright chromium or zinc plating to give it a corrosion resistant finish.

• Frequency: 50 Hz
• Power: 0.75kw
• Brand: Aadarsh
• Voltage: 230 V
• Machine Dimensions: 300 mm x 300 mm x 300 mm
• Pad Size: 30 mm x 100 mm
• Required Space: 500 mm x 500 mm
• Number of Heating Pad: 6 Nos. (3 Nos. on top & 3 Nos. on Bottom)
• Timer: 0 To 60 Seconds.
• Temperature Range: 110 to 250 Deg C

• dia: 18"

INNOLIGHT MBTL LIGHT FASTNESS TESTER is used for determination of Colour Fastness to light using a 500 W mercury Ballast Tungsten Filament Lamp & internally phosphor coated. The equipment is suitable for all types of textiles except photocrometic coloured textiles. The unit consists of a hollow cylinder of metal open at both ends with an internal dia of -18" & length of 18" A 500 W MBTL fading Lamp is mounted centrally so that the light distribution is constant around the circumference. An hour meter with buzzer and an hour totaliser are mounted on the base. Four specimen holders are installed at equidistance in inner circumference of cylinder alongwith metal sheet mask to cover half of each test specimen & the standards. As temperature may touch upto 800 C constant cooling arrangement with water flow is provided. A horizontal pump and water tank are included in scope of supply.

• Country of Origin: Made in India
• Features: Low maintenance, Robust construction, Smooth finish, Easy operations

• Display Type: Digital
• Power Source: 220 V Single Phase
• Automation Grade: Automatic
• Weight (kg): 50KG
• Number Of Heaters: 1 - 3 KW
• Motor (HP): 50Hz
• Capacity (ml): 550 ml
• Number Of Beakers: 6 Beakers
• Dimensions: 700 x 470 x 370 mm
• Brand: B-Tex
• Carriage Rotation (RPM): Reversible - 10 RPM
• Temperature (deg. Celsius): with Glycerin upto 130*, can use as dyeing machine also

The laboratory has been set up for implementing related reliability testing for raw material and final products. According to the test reports of laboratory, decisions are taken for using materials in related project.

We are an established name engaged in manufacturing and supplying a qualitative assortment of sublimation fastness tester to our patrons. The offered fastness tester is highly appreciated in the market for its durability, sturdy construction and minimal maintenance. These testers are fabricated using qualitative raw material that is procured from the most valued vendors of the industry. Our product range comprises infra colour dyeing machine, glycerin bath beaker dyeing machine and launder-o-meter.

Light fastness tester is used for determination of Colour Fastness to light using a 500 W mercury Ballast Tungsten Filament Lamp & internally phosphor coated. The equipment is suitable for all types of textiles except photocrometic coloured textiles.

• Power requirements: : 220 V AC, 65 watt
• Temperature range for test: : 120°C up to 250°C
• Temperature settings: : 150°C, 180°C & 210°C on each pad or variable temp setting. 
• Power readout: : Digital display for each pad.
• Number of heating stations: : 3
• Total number of pads: : 6 heating pads, 2 for each heating station, with individual heating
• Size of each pad: : 40 mm x 100 mm.
• Timer range: : 10-60 sec.
• Machine dimensions: : 38 cm.(w) x 34 cm. (d) x 28 (h)
• Machine weight: : 16.200 Kg.

Washing Fastness Tester is used to determine the color Fastness of textile materials perspective of any compositions for example cotton, Nylon, Linen, Silk, Wool, Yarn or fiber etc. by way of mechanical agitating of textile in contact with the piece of specified adjacent fabrics in a soap soda solution followed by rinsing and dying. The change in COLOR of specimen and stains of the adjacent fabrics are assessed with standard Grey Scale.