Rubber Gate Seals Dealers

We are leading manufacturer and supplier of best quality PTFE & Teflon Cladded Dam Gate Seals. These Dam Gate Seals are widely appreciated in market for the fine quality.These Z and L Dam Gate Seals are moulded or extruded to the shape required and the sealing effect is obtained partly due to initial interference with the embedded sealing plate and partly due to the deflection under load. To ensure even tightening of seals and thus to avoid waviness of the deal, brass spacer tubes may be used. This type of seal is used on gates on the crests of dams and weirs.

• IS: 11855, 1986: ASTM specifications

Flat Type Rubber Gate Seals are generally used as Bottom Seals. Available shapes: Rectangular, Wedge Type, Half Round at one end, etc., Bottom Seal with Side Seal Corner attached is also manufactured.

• Material: Nitrile Rubber
• Shape: Rectangular
• Size: 10inch, 2inch, 4inch, 8inch
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Application: Connecting Joints
• Feature: Accurate Dimension, Easy To Install, Fine Finish, Good Quality

Hydraulic Gate Rubber Seals are highly important elements. Hydraulic Gate Rubber Seals are mainly used in the gates of hydroelectric power plants. If the seals in the Gates of Hydroelectric Plant operate unsatisfactorily, water is lost from reservoir and the electric energy output may be reduced. To avoid such problems, it is advisable to buy such a vital product only from a reliable company. At Universalmoulders & Engineers, we are proud to say that we are among the trusted Manufacturers and Suppliers of Hydraulic Gate Seals. We offer the best quality Hydraulic Gate Seals that are highly durable, leak proof and are available in different shapes and sizes and fabrication materials.

• Material: Rubber
• Brand Name: Black Diamond
• Usase: In Dam Gates
• Thickness: 6mm to 50mm
• Hardness: 80 Shore A
• Temperature: -60 C to 150 C

All seals are made from a superior rubber compound that has been time tested and approved by the Engineers. Every batch of mixed rubber undergoes rigorous testing at factory laboratory as well as at NABL approved government laboratory to ensure all of the physical and chemical requirements before being released to final stage.An extruded rubber product differs from a molded rubber product in that the uncured rubber is forced through a die of the desired cross-section under pressure from an extruder. The extruded product is then vulcanized or cured, in a heated pressure vessel known as an autoclave. Extruded parts can be made in sizes ranging from 6" in diameter to a rectangular cross-section of up to 4" by 8" and in continuous lengths of up to 60 feet.

We are offering Dam Gate Rubber Seal. With the optimum use of our advanced production, we make dam gate pure rubber as well as Teflon and brass cladded seals for the radial gates & stop log gates. Our products are resisted against water, oil, heat ozone, and oxidation & suitable for all conditions of weather. These are extensively demanded for infrastructure projects purposes. We provide these rubber seals in customized as well as standard dimensions. Our seals help to improve the performance of the gates operations and gives good protection & pressure resistance against water leakage. The temperature resistance of our seals is tested from -45ºC to +150ºC. To avoid abrasion between the seals & wall of the dam we have specially developed brass & Teflon (PTFE) cladded rubber seals for longer life & low maintenance. ·         Musical seals(“P”) type ·         Edge typeflatbottom seals ·         “Z” type seal ·         Singledouble stem type seals   ·         Side seals

We Manufacture A Wide Range Of Rubber Center-bulb, Vertical And Companion Backstop Water Stop, Music Note, Hump And Flat Dam Gate Rubber Seal. These Are Designed To Retain Water, Prevent Water Penetration, Or Limit Contaminated Run Off In Civil Engineering Applications. We Make Musical Note Seals, J Seal/P Seals, Double Bulb Seal, Wedge Seals/Flat Seals As Per Client Requirements. We Make In Both Plain Rubber & Also With Cladding Of PTFE/Brass/Steel We Also Make Gate Seals With Asbestos/Canvas Reinforcement With Solid /hollow Bulb At The Centre Or At Edges. Corner Seal As Per Client Requirements Are Also Made.

• Country of Origin: India
• Type: Industrial Seals
• Brand Name: rabbit
• Certification: ISI Certified
• Shape: Rectangular
• Material: Rubber
• Chemical Resistance: Yes
• Application: Arrest Leak
• Condition: New
• Finishing: Polished
• Color: Black
• Suitable For: Water
• Automation Grade: Automatic
• Specialities: Unbreakable, Heat Resistant, Good Quality
• Packaging Type: Packet, Carton Box

manufacturer and supplier of various types of Rubber Dam Gate Seals. These rubber seals are being used in various Irrigation as well as Hydropower projects since many years. Dam gate seals are designed to either retain water, prevent water penetration, or limit contaminated run off in civil engineering applications. The inherent elasticity and resilience of Rubber Concept dam gate seals allow it to retain its sealing effectiveness in situations where there are fluctuating movements caused by water pressure, traffic, subsidence or seismic movement.

We are the Supplier of Musical Note type and other types of rubber seals as per Drawing for Dam intake gages - intake gates for penstocks,radial gates,Scouver vents,Tail race gates etc.,

• Size: 2inch, 4inch, 6inch
• Material: Rubber
• Thickness: 10-20mm
• Application: Tubes
• Color: Black
• Feature: Good Quality

Our entire range is value for money, as it is quality guaranteed, sold after a string of quality control tests, and is relied on by many. Buyers prefer us for our practice of delivering the orders within the pre-decided time frame. The offered Rubber Dam Gate Seals are available in various material like EPDM, CR, neoprene etc.

Cladded Rubber Gate Seal, Plain Rubber Gate Seal

rubber gate seals, Industrial Rubber Products, rice mill polishers

We are leading supplier of huge range of Rubber Dam Gate Seal

Rubber Dam Gate Seals, Printed Packaging Box, Engineering Rubber Products

Dam Gate Rubber Seal, Wear Resistant Rubber Liners, Mooring bollards

Dam Gate Rubber Seals, Polyurethane Wheels Hot Cast Wheels

Dam Gate Rubber Seal, vertical crest gates