Knuckle Joint Press Dealers

• Die Height: 250 mm
• Model: NKJ-160
• Bolster Thickness: 90 mm
• Main Drive Motor: 7.5 HP
• Bed Knockout Stroke: 50 mm
• Bolster Area: 400 x 400 mm
• Slide Area: 360 x 400 mm
• Tonnage Rating Point: 2.5 mm
• Capacity: 160 Ton
• Stroke Length: 100 mm
• Bed Knockout Capacity: 10 Ton

• Material: Brass, Metal
• Application: Industrial, Laboratory
• Color: Silver, YELLOW
• Finishing: Color Coated, Polished
• Packaging Type: Box, Carton
• Power Source: Electric
• Feature: Efficiency & Accuracy, High Quality, Precisely Designed, Rugged Construction

swivels provide adjustment between socket & lamp, allowing for adjusting lamp and light fixture angles and rotations without having to be repositioned within a room. Generally attached to either the base of a lamp or above the canopy of a fixture, swivels are essentially lighting parts that are made from two interconnected pieces that can rotate independently of each other. Once installed, lamp socket can be swiveled to 180 degree, 90 degree, or the best position for your tasks.it is knuckle joint required for joining two rods that have to bear high amount of tensile load. This joint is also known to offer some flexibility and angular moment. It is provided with a fastening key at top required for loosening and tightening connection as required. Brass knuckle joint is also suitable to be utilized for light brackets of wall or ceiling.

• Type: Knuckle Joint Presses
• Condition: Used
• Brand Name: Schuler

We have for sale, from stock in Delhi Used 400 Ton  KnuckleJoint Press Schuler PKNR 400 The  design of the knuckle-joint press is over 200years old. The advantages of the simple but very effective principle are stillused today for many applications. With a knuckle-joint press like Schuler400 Ton Knuckle Joint Press the force is guided through a knee-likejoint. The knee-lever effect, which it is named after, causes the pressingprocess to become very fast at first, but during the working process itreceives a proportional increase in force with decreasing speed.

• Condition: New
• Country of Origin: India
• Color: Multi color
• Power: Manual Hand press exerciser

Finger strengthner

Increasing quantities, a higher level of accuracy and higher material strengths - the requirements in sheet metal forming are clearly defined.

We Offer Knuckle Joint Press. We are in the field of manufacturing and trading of Welding Machines, their accessories, Safety Equipments, Fire Fighting Equipments for the last 50 years. We have achieved great heights since we started out. Our hardest competition is with ourselves. Our efficient management and dedication, coupled with skilled manpower, has made our company a leader in our field. We are committed to better safety solutions, by adopting the ideals of quality control, reliability and trust. We maintain strict quality control norms at various levels of manufacturing. We have full fledged testing facilities through latest technology, which ensures constant quality control. We have specialized range of the following products.

Increasing quantities, a higher level of accuracy and higher material strengths - the requirements in sheet metal forming are clearly defined. Knuckle-joint presses from schuler are thanks to their characteristic drive and their high system rigidity best suited to meet these requirements.

Increasing quantities, a higher level of accuracy and higher material strengths - the requirements in sheet metal forming are clearly defined.

• UPPER KNOCK OUT STROKE: 10MM
• RAM ADJUSTMENT MOTOR: 1 H.P.

Knuckle Joint Power Press This machine is made using high grade component, procured from reliable sources of the industry in compliance with international standards under the guidance of skilled professionals. Owing to its unique feature, this machine is widely appreciated by our esteemed clients. We offer this machine to the clients as per information provided by them to meet their diverse requirements within a set time - frame.

Power brand mechanical Power Presses are coming in both C frame and Pillar type versions from 3 tons to 250 tons capacity in most economical type of construction with several std/optional features such as manual/auto lubrication. systems; knockouts electronics hand safety; single/double or un-geared versions as also pneumatic feeders/ straightness and de-coilers for automation Purpose.Steel body fixed, Inclinable type power pressFram : The frame is of all steel construction, fabricated from Rolled steel plates with suitable cross ribbings. Presses upto 30T will be supplied with C.I. legs. proper alignment of the frame is ensured by machining.Clutch : The clutchis of pin/rolling key-type. the clutch is rigid and well supported. the clutch gives continuous strokes for mass production.Crank Shaft : Crank shaft is made of special alloy steel machined to close accuracy.We have fitted same in bronze bushes for smooth working, longer life & accuracy.Flywheel : Properly sized flywheel, is made of high grade cast iron, for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running.Gears : Gear are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.Table & Ram : Table and ram are made of high grade heavy duty cast iron & properly seasoned. They are perfectly aligned, to each other to obtain high accuracy & precision press operation.Lubrication : An efficient shot lubrication system has been provided for lubricating the sliding surfaces and moving parts. The lubricant is applied by hand pump.Inclining : Inclinable type presses are provided with inclining mechanism which can be easily det and locked inMechanism : Position by spanners within minutes. the press ils so designed that even in maximum inclined position, it is stable under heavy pressing load.

Features: This Machine is use for jointing the wood for making long length of the wood. It is available in three variant 1. Manual system 2. Pneumatic system 3. Hydraulic system  .

CONTROL CONVENTIONAL LOCATION MUMBAI COUNTRY OF ORGIN ITALY TIME OF DELIVERY IMMEDIATELY AGAINST PAYMENT YEAR OF MANUFACTURING UNKNOWN CAPACITY 1000 TON STROKE OF TABLE 170MM NO OF STROKE 32 SHUT HEIGHT 470MM SLIDE ADJUSTMENT 16MM WEIGHT OF THE MACINE CA. 32 TON DIMENSION OF THE MACHINE CA. 2840MM X1950MM

Consists of two or several members assembled by tie bars made of special steel and shrunk in position. Crankshaft is forged from special Alloy Steel. Its shape dimensions and wide radii eliminate stress concentrations and metal fatigue and runs in two Bronze Bearing which is well lubricated from centralised system. Heavy Duty low inertia single, multi disc clutch, brake unit is used for transmitting power to the machine. Wear adjustment is automatically compensated by little additional movements inbuilt in the air cylinder. Slides are counter balanced by pneumatic cylinders to eliminate any possibility of its running ahead of specified speed and also to contract possibility of rebound due to bottom ejector. All presses are equipped with pneumatically operated safety controls with provision of inching , single and continuous strokes control.

From India, we are offering Knuckle Joint Presses that are manufactured with perfection and widely reckoned for their excellence. The offered Presses are widely used for manufacturing products and can also be equipped with automatic devices to facilitate material handling and speedy production. One can also get them in tailored specifications, from us. Approach us for price quotes and placing orders.   Knuckle Joint Leverage Details : Forming techniques is greatly modernized, many products which were produced by conventional methods can now be produced on knuckle Joint Presses more economically to close tolerances thus eliminating subsequent machining. These presses are designed for work requiring slow, powerful presses close to bottom stroke, suiting to work involving coining, embossing, extruding, beading, sizing and swaging operations. Knuckle Joint Presses have virtually eliminated use of expensive machines for subsequent operations by producing components to close tolerances and these machines can be equipped with automatic feeding devices to facilitate material handling and speedy production. Regarding press cycle, from production point of view idle stroke is driven at high speed until mould touches material and forming takes place at slow speed exerting full rated machine capacity. The sketch will show the differences of moving curved lines of knuckle Joint press and an eccentric press, where stroke length is same, the dwell increases efficiency and accuracy of formed components. The Knuckle type drive of presses thus develops considerable power and tremendous mechanical advantage near bottom stroke. Slide adjustment is easily accomplished by taper wedge placed on upper portion of Knuckle mechanism either manually or with motive power at extra cost. Frame : Consist of two or several members assembled by tie bars made of special steel and shrunk in position.Crankshaft : Forged from solid billet is machined and ground all over and runs in two bronze bearing which is well lubricant from centralized system.Clutch & Brake : Low inertia multidisc clutch and brake is used for transmitting power to the machine. Wear adjustment is compensated by little additional movement of inbuilt air cylinder.Counter Balance : Slides are counter balanced by pneumatic cylinders to eliminate any possibility of its running ahead of specified speed and also to counteract possibility of rebound due to bottom ejector.Safety : All presses are equipped with pneumatically operated safety controls with provision of single and continuous stroking, inching and two hand operation.Standards with Machine : Lubrication Knock out device in slide Knock out at press bed Plain bolster plate.

• Brand Name: Narendra
• Capacity: 160 Ton
• Model: NKJ-160
• Tonnage Rating Point: 2.5 mm
• Stroke Length: 100 mm
• Strokes Per Minute: 60 (S.P.M) (Continous)
• Strokes Per Minute Intermitent: 25 (S.P.M)
• Die Height: 250 mm (S.D.A.U.)
• Bolster Area: 400 x 400 mm (LR x FB x HT)
• Slide Area: 360 x 400 mm (LR x FB)
• Slide Adjustment: 15 mm
• Bolster Thickness: 90 mm
• Main Drive Motor: 7.5 HP
• Bed Knockout Capacity: 10 Ton
• Bed Knockout Stroke: 50 mm

Joint Presses, Suitable for CoiningEmbossingBlankingForming operation, duly Stress Relieved Frame, as per specifications, equipped with Pneumatically Operated Friction Clutch and Brake Unit, Centralized automatic Timer Controlled re-circulatory Oil Lubrication System, Motorized Slide Adjustment, Hydraulic Slide Locking, Eight Point Slide Gibs