flowtech fluid systems Dwarakanagar, Visakhapatnam, Andhra Pradesh

> Suction Diffuser General DescriptionInstalled at the inlet of the pump.Serves as a filter to remove suspended debris.Act as a flow straightener and guides pumping media at the inlet of impeller.Stabilizes flow at inlet of the pump.Cast Iron body for ANSI class 125 and ductile iron for ANSI class 250.Flanges as per ANSI standard / Customer requirement.Acts as an elbow.>>>Triple Duty Valve General DescriptionInstalled at the discharge side of pump systems.Spring-loaded disc prevents valve chatter.Balancing valve/ Priming with by-pass function.Inline or 90° flow arrangement is possible.Cast Iron body for ANSI class 125 and ductile iron for ANSI class 250.Flanges as per ANSI standard / Customer requirement.Throttling operation.

Kinetic air valves are commonly used in air venting/air admission services in waterpipelines. Performance of a kinetic air valve is severely affected by tampering thevalve with an external mechanism. Tamper proof Kinetic Air Valves provide longerservice life and cost effective maintenance. With cast iron body, cover and cowl ithas a pressure rating of PN 1.0-1.6.

Brand Name : swelore

Color : Silver and Green

Swelore offers customized dosing skids (packages) built as per national &international Standards. Units are self contained, ready to operate units, which onlyrequire to be connected to customer's chemical supply line & injection points

Kirloskar SHS is sump pump for solid handling application. It is suitable for pit depthupto 9 metre

A steam trap is an automatic device to trap or hold steam until it has condensed andto allow condensate and air to pass as soon as they accumulate. 20-26% of steamleaving a boiler lost via leaking conventional trapsWith best steam trap available in the market and proactive steam trap maintenanceprogramme can reduce loss to less than 1%.

These valves are available in non rising as well as rising spindle type suitable for clearwater up to 450 C. These valves are designed with total compliance with applicabledesign and testing standards. All designs are validated for stress analysis. Sluicevalves find wide application in water works, water/effluent/sewage treatmentplants.

These valves are very useful in preventing back flow of water to the pump. Thesevalves have minimum head loss and can be very competitive in terms of long servicelife. These valves are very useful in waterworks pipelines to reduce hammer effect.Non slam and quick closing characteristics have made this product a verydemandable one across markets.

These valves are very useful in waterworks pipelines to reduce hammer effect.These valves have minimum head loss and can be very competitive in terms of longservice life. Non slam and quick closing characteristics have made this product a verydemandable one across markets.

SHM are horizontal non-clog pumps having single stage, single suction with back pullout type design. SHS are vertical non-clog pumps for wet pit applications. The pumpsection is suspended by a column pipe which also protects the transmission shaft.These pumps can be offered with a column length up to 6.5 m. The impeller is singlesuction type non-clog, free flow dynamically balanced. For SHM pumps the standardlubrication is grease and the optional one is oil. In case of SHS pumps the lubricationis grease based. These pumps are widely used in paper industries, water carryinggravel and so on.

KBL is pleased to offer top-of- line product in pipeline flow control. Kirloskar waferand lugged Butterfly valves have been developed with extensive application, designand manufacturing expertise. These products are produced by employing modernmanufacturing practices under a robust quality assurance system. These practicesensure consistent product quality and dependable performance.

Kinetic air valves are commonly used in air venting/air admission services in waterpipelines. Performance of a kinetic air valve is severely affected by tampering thevalve with an external mechanism. Tamper proof Kinetic Air Valves provide longerservice life and cost effective maintenance. With cast iron body, cover and cowl ithas a pressure rating of PN 1.0-1.6

i-CP pumps dimensionally conform ISO:2858. These pumps are horizontal, radiallysplit,single stage, centrifugal end suction volute with top centreline delivery. Thepump feet are integrally cast with the delivery casing. The impeller is of enclosedtype. The pump shaft is supported by pre-lubricated anti friction sealed bearings as astandard scope of supply. These are widely used in Chemical industries, food andbeverages industries, off sites of petro chemicals and refineries.

A pump with a muscle, extra strong for long life and fully reliable for precise &efficient perform.

This is also known as swing type valve. These valves are designed with perfect flatseating for better sealing. With a pressure rating of PN 0.2 these valves are widelyused in suction side of pump to avoid flow reversal

KBL has emerged as India's first and only valve manufacturer to get the Certificate ofCompliance from Factory Mutual for its fire service water control valves, whichcovers Outside Screw & Yoke and Non-Rising Stem Gate Valves (Metal Seated)

With a low operating torque these valves have very sturdy and robust design. KBLhas successfully carried out Flow Test on large size Butterfly Valves including 2200mm in its in-house Hydraulic Research Centre at Kirloskarvadi. Another featurewhich makes KBL butterfly valves competitive in the market is its low life cycle costand lower maintenance. With centric type pressure up to PN 1.6/Class 250, thesevalves find wide application in water works, water/effluent/sewage treatment plantsand so on.

Kinetic air valves are commonly used in air venting/air admission services in waterpipelines. Performance of a kinetic air valve is severely affected by tampering thevalve with an external mechanism. Tamper proof Kinetic Air Valves provide longerservice life and cost effective maintenance. With cast iron body, cover and cowl ithas a pressure rating of PN 1.0-1.6.

Condensate Extraction Pump series(BHRc, RKB-CV, MN-CV) by Kirloskar Brothers Limited is widely used forcondensate extraction application in thermal and nuclear power plants. HighEfficiency and Low NPSHR characteristics make CEP pumps the best suitable in thesesegments.

These valves are widely used in Refineries and Petrochemical Industries, FertilizerPlant, Thermal Power Plant and other process industries. With socket and screwedend connection, these valves are designed for handling very high pressures. Its rigidand sturdy design along with low pressure across the valve make it a very formidablemodel in the entire product line

These valves are widely used as for Naptha and Naptha derivatives in oil refineries.With a flanged end connection, these valves are designed with API 600 standards. Itsrigid and sturdy design along with low pressure across the valve make it a veryformidable model in the entire product line.

These valves are widely used for Naptha and Naptha derivatives in oil refineries.With a flanged end connection, these valves are designed with BS1873 standards. Itsrigid and sturdy design along with low pressure across the valve make it a veryformidable model in the entire product line.

These valves find wider usage in water, stream, air, gas and liquids having corrosiveproperties. These valves are made by using materials after carrying out all qualitychecks and processed by adhering stringent quality parameters. The rigid sturdydesign promises a longer life span.

Canned Motor Pump is a centrifugal pump with hermetically sealed electric motormounted on single shaft thus eliminating the requirement of mechanical seal orother sealing device. Entire rotating assembly is immersed in the liquid, and motorstator and rotor are isolated from the pumped liquid with corrosion resistant, nonmagneticliner and sleeve. A part of the pumped liquid is by-passed through themotor, for cooling of motor and lubricating the bearing.