Project Sales Corp Suryabagh, Visakhapatnam, Andhra Pradesh

  The PSC TRT-3P Extendable Tagline Retriever Tool – When collapsed the safety tool is used to guide and manoeuvre suspended loads, pull slung loads, push suspended loads to final position without the need for use of hands to do it-making the operations safer. The inner aluminium pole allows the tool to be extended upto 12 feet to retrieve taglines without getting into the red zone under a suspended load. It is recommended that an employee is completely under control and balanced hen operating. Also do not use near energised lines due to risk of electric shocks.  

Type : New

Application : The aluminum head will pull/break off the pole at approximately 300lbs of pushing/pulling force.

Use PSC TubularGuider® to safely work with suspended tubular loads without getting injured due to pinch and crush-related spots. With the new PSC TubularGuider® now reduces pinch and crush-related injuries while working with suspended tubular loads. The PSC TubularGuider® features non-slip grips, a locking mechanism, and a super strong aluminum shaft. The Dual Release uses a spring-loaded noose release to extend the cable through the tool to release the tubular or the slide control which instantly drops the noose from the tool. Body: High-impact Poly Propylene (Orange) Internal Strap: Nitrile (Black) / Poly-Propylene webbing (Black) Carabiner: Galvanised Steel

Material : Body: High-impact Poly Propylene (Orange) Internal Strap: Nitrile (Black) / Poly-Propylene webbing (

Application : Grab Tubulars Guide Tubular into position Guide and land Suspended loads Guide and move pipes Pull

PSC Tagline Retriever Tool – Injuries from handling, lifting, or carrying loads is one of the most common types of accident in the offshore industry. The successful management of these risks is achieved through the introduction of Hands-free safety tools. Sometimes in the course of their duties, riggers cannot avoid getting under a suspended load, or at least in the load shadow( the area under the load into which that load could fall and cause fatality), and it is usually because they need to catch onto the tagline to guide the lifted load into landing position. The PSC Tagline Retriever Tool allows a worker to be at a much safer distance from the load when suspended and freely grasp and handle the tagline while remaining outside the line of fire of objects and the suspended load.   PSC TRT is designed to help facilitate ‘hands-free’ lifting and improve safety In handling taglines. The tool is a modified aluminum telescopic boat hook with a rubber buffer at the other end. The hook end is used at full extension (approximately 2.1m / 7ft) to retrieve taglines hanging vertically without a load handler having to go too close to a suspended load. The rubber buffer is used to push against suspended loads to guide them, especially when landing loads in tight or congested spaces. Once again, this allows the operator to remain a safe distance from the load until it has landed. The poles would normally be fully retracted (for rigidity) during this type of use where their length is 1.2m / 4ft. However, they can be used half-extended if required but if too much pressure is applied, they will telescope in.

The PSC SafeGuider and Tagline Retriever Tool is a lightweight tool used for the hands-free guiding, and directing of heavy cranes, fork lift loads, and retrieving the taglines. With the use of this retriever tool, workers can now easily direct the taglines from a safe zone and no more have to worry about getting injured. PSC SafeGuider and Tagline Retriever Tool enables the person to multi-task with a single tool and avoid carrying of many tools for different-different purposes. The PSC SafeGuider and Tagline Retriever Tool is made with Ash Hard Wood pole with a serrated cat aluminum head tested to push loads right up to 600lbs, this lightweight push-pull pole is ideal for maneuvering suspended loads without taking the hand close to the danger zone.

Size : 2, 3, 4, 6 & 8 Feet Length.

PSC SafeGuider™  High-viz Tagline ropes are specially designed to be a safer alternative to ineffective and hazardous rope when guiding a suspended load. When a crane lifts an object, it can swing into objects around it or power lines, or on a personnel on the ground. This safety tagline rope is attached to the load as it swings on the crane’s hook so that it doesn’t collide with objects around it. Using PSC SafeGuider™  High-viz tagline ropes you can eliminate potential hand injuries and unnecessary delays created by out-of-control loads during lifting and moving. Available in 10’,15’,20’,25’,30’40’ lengths., the PSC SafeGuider™  High-viz tagline ropes are tangle-resistant and knot-free and feature a high visibility coating to repel corrosive material for visibility in low light situations. They always retain their shape and are easily rolled up for storage.

Material : Nylon

The PSC Load Guider™  Push Pull Tool helps to mitigate the risk of pinching or crushing hands & feet while handling suspended loads or maneuvering loads in tight positions until the load is in its final placement/resting position. The tool is simple to handle and allows the user to guide a suspended load from a distance, either with push or pull activities. The PSC LoadGuider™  Tool also avoids unnecessary strain on the wrists during maneuvering operations and protects from cuts, pinches, abrasions, lacerations, etc. thus improving hand safety. When handling suspended loads or maneuvering loads in tight spaces, the PSC LoadGuider™  Push Pull Tool helps to reduce the risk of pinching or crushing hands and feet until the load is in its ultimate placement/resting position. The tool is easy to use and allows the user to guide a hanging load from a distance by pushing or pulling.

Material : Fiberglass, Plastic, Nylon

Size : 42”, 50” & 72”

Project Sales Corp has brought in the PSC LoadGuider™  safety tangle-free Tagline ropes to solve the problems associated with the use of PP ropes. These taglines are specifically designed for hands-free lifting applications. PSC LoadGuiders™  are tangle resistant as the center rope is wrapped with an outer layer of smaller diameter ropes. This prevents the tagline from twisting and wrapping around objects or people. PSC LoadGuider™  Tagline Ropes are designed not to catch on pinch points, as there are no knots or raised surfaces. These are made in Iceland in technical cooperation with a major drilling operator. These safety tagline ropes are tangle resistant as it is designed with a rigid core and stiff cover braiding to prevent any turning on itself and wrapping around objects. The patented Helix spiral effect increases grip in wet and slippery conditions. The PSC LoadGuider™  Safety taglines are designed not to catch on pinch points, as there are no knots or areas to snag. Inside the Helix cover is Dynex 75 fiber giving them exceptional strength and making them very lightweight for operator handling. A twist lock carabineer 50 mm gate opening as per ANSI Z359.12 can now be purchased for use with the PSC Taglines.

A simple design that acts as an extension of the body to move, push, or reposition loads, keeping hands and fingers out of the danger zone by avoiding crush and pinch points along with sustained control of the load being positioned. The PSC Load-It™  positioning tool can be used for a multitude of jobs like an extension to move, push or reposition unsuspended items and equipment, grab taglines, wire cables or slings, safely guide, maneuver, and position loads like gratings, finished steel products master links, flanges, and other heavy components. PSC Load It™  also ensures relaxed body posturing while usage to reduce the risk of back injuries due to manual load stress.

Application : Lifting, Moving and positioning of load Retrieving of tagline or guiding of suspended load Grab, gu

PSC Lift Assist Manual Lifting Tools are essential lifting aids for manual handling, designed to improve safety and efficiency during lifting and handling operations. These lifting aids are particularly useful for handling small and heavy items such as pipe, ironwork, and tubing sections, as they help to reduce unnecessary bending and lifting activities that can lead to back and other musculoskeletal injuries. The use of Lift Assist tools promotes safe lifting practices and ensures lifting and rigging safety by reducing the risk of hand and finger injuries that can occur when lifting and carrying small equipment with bare hands. These lifting aids are compatible with a wide range of equipment, including chicksan and bop choke valves, pup joints, fishing tools, pipe, tubing, and deck cargo. Whether you’re working in oil and gas, construction, or any other industry that requires manual lifting, PSC’s Lift Assist Manual Lifting Tools can help you work more safely and efficiently while promoting lifting equipment safety and safety lifting practices.

PSC Handle-Tech Pipe Handles is the latest product in PSC’s hands-free safety range.  In many industries, like fracking, for example, there might be dozens of guys dragging pipe and hose around the fields all day long. The hoses are usually too wide to get your hands around. They may be under high pressure, or even filled with hazardous gas or chemicals. The only way to move them is to bend down, hug them to your body and walk while dragging them – often over muddy, wet, slippery, or icy terrain. It’s very awkward and unwieldy. You hear about a lot of hand injuries, back injuries, falls, hoses decoupling and hitting people, and other accidents.  A simple handle that could be locked onto any hose or pipe, enabling the worker to move the hose while standing in a more natural position, almost as easily as carrying a suitcase. The handles make it so much easier and so much safer, that people will not want to move any hoses or pipes by hand ever again. CLICK. GRIP. LIFT. MOVE. AS SIMPLE AS IT SOUNDS !​ The Handle-Tech is extremely strong, has great electrical insulation characteristics and is practically impervious to heat and cold. The finished product is so strong it was tested to live over 1100 pounds, and the durability is just extraordinary. The Handle-Tech (Suction/Pumping) Hose Safety Handles are a ground breaking hand tool designed to improve safety and efficiency for manual handling of many types of industrial hose.

PSC Hand Safety - Tagline Ropes - Hand safety tools. Taglines or restraint lines must be used when rotation or swinging of the load is or may become hazardous or if the load needs guidance. In brief, loads requiring continuous manual guidance while in motion shall be provided with tag lines, and required tag lines must be used “on loads likely to swing or which need guidance”

Brand Name : PSC Hand Safety - Tagline Ropes - Hand safety tools

Material : Nylon, Polyester, Rubber

Color : Orange, Yellow

PSC Hand Safety - Tagline Retriever Tools - Hand safety tools The PSC Tagline Retriever Tool is designed to aid with ‘hands-free’ lifting and tagline handling safety. A modified aluminum telescopic boat hook with a rubber buffer on the other end serves as the tool.The hook end is extended to its full length (about 2.1m/7ft) to recover taglines strung vertically without requiring a load handler to approach a suspended load too closely. When landing loads in confined or congested spaces, the rubber buffer is utilized to push against suspended loads to direct them.This permits the operator to stay a safe distance away from the load until it lands. During this type of application, the poles would generally be fully retracted (for rigidity) because their length is 1.2m/4ft. They can, however, be utilized half-extended if necessary, but they will telescope in if too much pressure is applied.

Color : Black

Application : Hand safety tools

PSC Hand Safety - Push/Pull Poles - Hand Safety Tools. PSC Push/Pull poles mainly focus on aiding hands-free guiding and roots for hands-free safety. It helps in safely guiding,spotting and landing of suspended tools. It further helps in manoeuvring drill pipes, snagging of taglines and sling legs etc. though its main work is to protect you from pinch/crush points and areas. 

Brand Name : PSC Hand Safety - Tagline Ropes - Hand safety tools

PSC Hand Safety- Hands-off Tools - Hand Safety Tools.  Project sales corp has the most diverse range of hands-free safety tools, keeping hands and fingers away from impact zones during operations such as hammering or tasks which demands workers to lift and shift small loads and protecting them from pinch & crush injuries.

Brand Name : Project Sales Corporation (PSC)

Color : Yellow

Application : Hand safety tools

PSC Guide-it™ Hand Safety Tool  is a simple easy-to-use Hand-Safety Tool to keep hands and feet away from pinch and crush injuries when guiding suspended loads. A robust fiberglass pole with a nylon head allows personnel to push and guide suspended loads to their final place, without taking them too close to the load to avoid caught-between struck-by hazards.  This push pull pole assists in “Hands-Free” Guiding, spotting, and landing suspended loads, maneuvering drill pipe and all types of tubular on pipe racks or on the platform, snagging taglines and sling legs, etc.  PSC Guide-It™  Hand Safety Tool assists personnel to maneuver and guide suspended loads while avoiding pinch points and crush points. With the use of these tools, workers do not place themselves in danger by working in unsafe proximity to hazardous suspended loads.

PSC launched its new PSC Guide It™  Safety Rigger Tagline  which is designed to enhance safety and performance during lifting operations. Made of the finest polyester fibers, this 14mm diameter rope features an ultra-lightweight 25kN galvanized steel composite swivel hook with a 2-inch opening, making it easy to attach to the load and ensuring a secure connection. The safety latch adds an extra layer of protection during lifting operations. PSC Guide It™ Safety Rigger Tagline Rope is a quality-tested tagline/rope that rigger can use to control the swinging and/or rotation of a suspended load, making it an essential tool for any lifting operation where worker safety is a top priority.

Material : Polyester

Introducing the original UK Finger Saver, now available in India! This lightweight, 350mm safety tool in vibrant orange is designed to protect hands during high-risk activities like using flogging spanners. Don't risk injury with duplicates; invest in the genuine Finger Saver for peace of mind and safer workdays in oil and gas operations.

Material : Body: High-impact Poly Propylene (Orange)

Size : 350mm

Introducing the Original UK Finger Saver, now in India! This safety tool protects hands and fingers from workplace hazards. With a length of 850mm and vibrant orange color for visibility, it's perfect for oil industry workers. Don't settle for duplicates – invest in genuine safety. Lightweight and versatile, it's ideal for confined spaces. Prioritize hand protection and enhance workplace safety with the Finger Saver today!

Color : Orange

Application : Simple Tool To Keep Hands Away From Impact Zones

Size : 850mm

Introducing the latest Finger Saver: a compact, UK-made tool at 295mm, weighing only 164g. Its vibrant orange color ensures visibility, while its design offers precise control with punches and chisels. Avoid duplicates for safety. This tool is crucial for preventing finger injuries and crush incidents, particularly in oil and gas industries. Its lightweight build makes it perfect for confined spaces. Prioritize safety with this essential hand protection gear.

Color : ORANGE

Certification : ISO9001 and AS9100

Material : Lightweight

Color : Orange

The PSC FingerSaver is a finger safety tool designed to reduce the risk of hand and finger injuries in the workplace. This innovative tool keeps your hands away from the impact of the hammer on the flogging spanner and from pinch points when using impact wrenches, minimizing the risk of finger injuries. The 3G version of the FingerSaver is available in Standard 350 mm, Long 900 mm, and Compact 295mm. This finger saver tool offers support equivalent to that of hands and fingers, and its design is carefully considered and tested on typical applications and users where large spanners and flogging spanners are used on nuts and bolts.  At PSC, we are committed to promoting finger safety and helping the onshore and offshore sectors of the Oil & Gas Industry become safer places to work. Our finger injury prevention tools, such as the FingerSaver, are designed to help prevent all hand and finger injuries across your site, ensuring that your workers can return home safely at the end of the day. Whether you’re lifting heavy loads or working with tools that pose a risk of finger injuries, PSC’s FingerSaver can help you work more safely and efficiently, reducing the risk of accidents and injuries in the workplace.

  PSC EZY-Lift is a simple pipe lifting tool designed to keep the wrist and hand in a neutral position. It avoids strain, and prevent pinched fingers and cuts from sharp surfaces. The ergonomic design is to avoid strain when used with proper body positioning and lifting. This is a CNC cut metal piece covered with a rubberized coating. We simulated the right way to lift and hold a pipe and this tool is accordingly designed to allow a person to keep the wrist in a neutral position. The use of bare hands as an alternative to holding a pipe at the entry and exit could cause cuts or any other pipe-dropping incident.    

The PSC Chisel and Punch Holder is a versatile safety tool that can benefit workers across a wide range of industries. Whether you’re in construction, automotive repair, metalworking, or woodworking, this holder can help you work more efficiently and safely.  One of the key advantages of the holder is its ergonomic design, which reduces hand fatigue and strain. With a comfortable and firm grip, workers can use these tools more effectively and with less effort. Another benefit of this punch and chisel holder is its safety features. By keeping workers’ hands and fingers away from the contact point, the holder helps to prevent injuries and accidents. This is particularly important in industries where workers are using sharp tools or working with heavy machinery. In addition to its ergonomic design and safety features, this hand safety tool is also durable and long-lasting. Made from high-quality materials, it can withstand heavy use and is resistant to wear and tear. It is also easy to clean and maintain, ensuring that it remains in good condition for many years. Overall, the PSC Chisel and Punch Holder is a valuable tool for any worker who frequently uses chisels and punches. Whether you’re looking for a punch and chisel holder, punch and chisel organizer, or punch chisel holder, this tool can help to improve your productivity and safety on the job.