project sales corporation Suryabagh, Visakhapatnam, Andhra Pradesh

The original oil and gas industry glove. Co-developed by the Oil and Gas Industry Safety Committee representing ExxonMobil, ConocoPhillips, Chevron, Halliburton and many other respected industry leaders.Brought to India in 2010 by Project Sales Corp, KONG is now the Industry leader in Impact Protection Gloves used by almost all the oil and gas companies in India.

SHOWA 377 is a fully dipped Nitrile coated glove is dipped in sky blue thin-Nitrile, and has black foam Nitrile coating in the palm area. This glove provides comfort and touch sensitivity. The thin Nitrile coating offers limited protection against a wide range of chemical substances while the superior foam over dip ensures excellent grip even in oily applications. An elastic knit wrist holds it firmly on the arm for enhanced fit. This glove is both thin and tough, allowing precision work to be carried out even in the most demanding conditions.

TS-115 Corrosion Control Grease is a multipurpose, high temperature bearing and machinery grease for industrial applications where salt water, acid vapors, or chemicals cause corrosion. It has a high melting point, over 500 degrees F, and resists water washout.

Copper Supreme Special Blend is a non-lead, non-zinc compound that applies easily in a wide range of temperatures and conditions. It is a wash-out resistant, and will not toughen or bleed extremely in storage.

Superior Glove - Clutch Gear Anti-Impact mechanics-gloves MXVSB:Our Clutch Gear impact protection mechanics glove features dense, thermo-plastic foam rubber patches at the back of the hand to protect only in the places where impact occurs, so glove stays fully flexible.

These superior leather gloves are padded with a layer of vibration-dampening polymer. Side-split fitter, safety-cuff style, anti-vibration palm and abrasion resistant double thumb patch, with red cotton-back cuff. Good protection from abrasions, repetitive impact and work with pneumatic vibrating tools.

Ironclad Wrenchworx Vibration Impact is a highly dexterous, patent design glove, engineered to provide maximum protection, in the critical palm area, from fatigue and the potential damage associated with vibration and impact tools. Features and Benefits Energy absorbing, non-compressible, 100% silicone gel-palm pads. Velcro fastener for ease of donning, which also provides a secure fit limiting the ingress dirt and debris. Synthetic back of hand and finger side walls is form fitting and breathable for all day comfort. 100% Machine washable.

SHOWA 377 is a fully dipped Nitrile coated glove is dipped in sky blue thin-Nitrile, and has black foam Nitrile coating in the palm area. This glove provides comfort and touch sensitivity. The thin Nitrile coating offers limited protection against a wide range of chemical substances while the superior foam over dip ensures excellent grip even in oily applications. An elastic knit wrist holds it firmly on the arm for enhanced fit. This glove is both thin and tough, allowing precision work to be carried out even in the most demanding conditions.

Roughneck Tefloc Gloves Designed with Oil & Gas in Mind Features TPR impact protection on top of hand and full length of fingers; High Visibility for Increased Safety; CE Rated 4232, Level 2 Cut and Puncture Resistance; TefLoc Grip System on Palm & Fingers Resists Oil & Enhances Grip; Extended Neoprene Wrist Closure with SuperCuff Technology

Kong - Rigger Grip CUT 5 Cut and Impact Protection Glove:The Rigger Grip Cut 5 is built on our Original Rigger glove chassis with the same exclusive Duraclad® Rope Channel Reinforcement. We added our exclusive CT5™ material for CE level 5 cut resistance covering the entire palm. It has our Patented Diamondclad® outer palm for ultimate grip on wet, oily surfaces on the rig or in the field.

We offer OEM buyout spares and parts manufactured by aftermarket companies for following manufacturers - Koomey Type 80, ShafferKoomey, CAD, Massco, Stewart & Stevension. Our vendors are major suppliers of Koomey-type parts. Their warehouse is well-stocked with parts and repair kits commonly used on Koomey-type Accumulator Units and maintains an extensive inventory of air-operated hydraulic pumps, triplex pumps, control valves, regulators, relief valves, check valves, transmitters, and gauges. They also stock a vast supply of parts and repair kits for subsea applications, including SPM Valves, shuttle valves, and regulators. In India, we have supplied Rig Noble Duchess with these spares.

The glove that revolutionized the safety industry did so through its dexterity, impact-resistance, and cut protection. The Chrome Series 4026 is the glove that made safety an uncompromised necessity. With level 5 cut protection on the palm, and an advanced impact-protective system lining the back of the hand, the 4026 guards against the most prevalent work-site hazards without taking any of the flexibility and comfort.

Never-Seez®, a prominent trademark in the Bostik family of products, has been recognized for almost five decades as the industrial leader in anti-seize and lubricating compounds. When first introduced, the original Never-Seez anti-seize compound represented an innovative way to assemble and disassemble metal parts with ease. A new technology in mechanical engineering, Never-Seez was soon specified for major industrial and government use on parts exposed to heat, pressure and corrosion. Never-Seez contains very fine metallic particles in a special hydrocarbon carrier which seals and protects metal parts under the most extreme conditions of heat, pressure, and contamination. The fine, protective film of Never-Seez cannot be burned off or completely removed by abrasion. Never-Seez cannot be washed off by fresh or salt water. The protective coating will remain, even after extended exposure to the elements. Application of Never-Seez insures trouble-free protection against seizure, corrosion, pitting, and galling of metal parts. Disassembly of machinery, piping and metal parts are extremely difficult. Both driven and static parts of mechanical equipment are subject to seizure.

Mechanix - M-PACT-2:Anatomically designed for an unbelievable fit, the M-Pact2 features an accordion knuckle with EVA foam padding for flexible impact protection to the top of your hand. Thermal Plastic Rubber (TPR) finger guards protect your digits from impact and pinching injuries while the TPR closure and Neoprene cuff create a seamless fit to your wrist. Your thumb, index, middle, and ring finger feature a tacky grip material for durable gripping power while the anatomically shaped palm padding provides comfort in any situation.

The KONG® Cold Condition Waterproof is perfect for cold, windy, wet conditions on the rig or in the fields. It’s oilproof, windproof and waterproof and offers the rugged protection and back of hand protection that the Oil and Gas Industry demands.Now in India with the Auth Distributors - Project Sales Corp

Thermoplastic Safety Padlock is designed exclusively for lockout tagout applications. It is durable, lightweight, non-conductive thermoplastic lock body.

Battery Type : Alkaline

Certification : CE, cETLus,ATEX,IECEx,INMETRO and MSHA

The Rigger Grip Cut 5 is built on our Original Rigger glove chassis with the same exclusive Duraclad® Rope Channel Reinforcement. We added our exclusive CT5™ material for CE level 5 cut resistance covering the entire palm. It has our Patented Diamondclad® outer palm for ultimate grip on wet, oily surfaces on the rig or in the field.

The KONG Slip & Oil Resistant features exclusive Hybrid Polymer Technology on the entire palm. The special palm channels oil, sludge and mud away from your hand for maximum grip and dexterity on slippery objects. The entire palm is also 100% oil proof meaning no oil can get to the palm of your hand.

The Rigger glove is specifically designed for a rigger. It has dual layer Duraclad reinforcements on the rope channel of the glove to stand up to long periods of handling rope and cable while rigging. It also offers the same KONG back of hand protection that the Oil and Gas Industry demands.

Kong - Kong Original:The original oil and gas industry glove. Co-developed by the Oil and Gas Industry Safety Committee representing ExxonMobil, ConocoPhillips, Chevron, Halliburton and many other respected industry leaders.Brought to India in 2010 by Project Sales Corp, KONG is now the Industry leader in Impact Protection Gloves used by almost all the oil and gas companies in India.

The KONG Cut 5 Knit is CE EN388 level 5 and ANSIISEA level 3. The Foamed-Nitrile palm is high viz and padded for impact absorption. It’s lightweight, breathable, and offers full KONG back of hand protection on the fingers, knuckles and metacarpal bones.

Anatomically designed for an unbelievable fit, the M-Pact2 features an accordion knuckle with EVA foam padding for flexible impact protection to the top of your hand. Thermal Plastic Rubber (TPR) finger guards protect your digits from impact and pinching injuries while the TPR closure and Neoprene cuff create a seamless fit to your wrist. Your thumb, index, middle, and ring finger feature a tacky grip material for durable gripping power while the anatomically shaped palm padding provides comfort in any situation.

HexArmor 2021 Rig Lizard is designed for oil and gas safety gloves by providing unmistakable grip advantages, and the highest level comfort and dexterity, without sacrificing protection. 2021 is an impact resistance, puncture, and cut, making it as a great all-purpose glove.