Cold Shrink Cable Accessories Dealers in Jagadhri, Yamunanagar

To maintain the continuity of Cable specially for long length, the cable jointing accessories and cable jointing kits came into existence. The power cable jointing kits can be Straight Through for XLPE to XLPE or PILC to PILC Cable and can be Transition Cable Joint type for connection of XLPE to PILC Cable. The voltage grade is from 1.1 kV onwards. The cable jointing system works properly in underground cable even with water stagnation in the ground. There are wide range of cable jointing kits & systems available today, which can be classified by the way they are applied such as taped type, pre-moulded push-on slip-on type, cold application type and heat shrinkable type. Our company manufacture cable jointing compounds in important three part systems i.e. handener, resin and filler packed in buckets packs.

• Certification: ISO 9001:2008 Certified, CPRI TEST REPORT
• Color: RED
• Feature: Water Proof
• Condition: New
• Country of Origin: India
• Type: Cable Jointing Kits
• Brand Name: YAMUNA DENSONS
• Material: Pvc, XLPE, PILCA/ABC
• Application: Cable Joining, Cable Termination, Construction, Electrical Industry

Our products conform the various standards stipulated for the industry such as IS/BS/IEC/ DIN/ VDE/Cenelec etc.  Quality is our benchmark and the consistent performance of our products for more than 40 years under extreme environmental conditions has conclusively proven the quality standard of the products.  We have a successful track record for supplying our material to more than 35 countries. All of our products have been type tested as per IEC/IS standard at NABL Accreted Lab CPRI and ERDA.  33 KV joints & termination are type tested from CESI-Italy & KEMA, Holland

• Type: Outdoor Termination Kit
• Application: Domestic,Industrial
• Color: RED
• Condition: New
• Warranty: 2Years
• Country of Origin: India

• TEST: A.C. Dry withstand Voltage , Impulse withstand Voltage
• TYPE XSO/E - 2236: 75 kV / 1min and 170 kV / 10 shots

Terminations upto 36 kV For 3 Core XLPEEPR Insulated Cable DENSONS HEAT SHRINKABLE TERMINATIONS UPTO 36 kV For 3 Core XLPEEPR Insulated Cable

• Black: Red

We are offering heat shrinkable single core cable termination. Incorporated with a vision to attain prestigious niche in the market, our firm is engaged in offering heat shrinkable single core cable termination. It is demanded in the electrical industry owing to its capability to withstand high voltage and heat. Offered termination is highly suitable for 1112kv, 3336kv, 2224kv single core pvcxlperubber insulated screened cables. It is manufactured with high quality materials to ensure its durability. Owing to its fine finish, optimum resistance against corrosion, high tensile strength and quality as per the industry laid norms, offered heat shrinkable single core cable termination is acclaimed by customers. Salient features: high tensile strength resistance against corrosion capability to withstand with high voltage high quality easy installation superior finish customized design electrical performance : tests

• Type: Outdoor Termination Kit, Indoor Termination Kit
• Application: Domestic, Industrial
• Certification: ISO 9001:2008
• Color: Red
• Condition: New
• Feature: Durable, High Performance, Stable Performance
• Warranty: 1Year

We are India's leading manufacturer and exporter of 'US-SEAL Heat Shrinkable Power Cable Termination Kits'. We have a complete range of heat shrinkable termination kits which suits polymeric/plastic and paper insulated cables upto 36 kV. Our heat shrink range covers both indoor and outdoor terminations and suit all types of LV-MV-HV electrical cables (single or multi-core) with or without armour or lead sheaths.

We are offering cable jointing kits. For heat shrinkable joints and terminations for high voltage /medium voltage xlpe/pilc/pvc/rubber insulated cables up to 66 kv and composite polymeric insulator up to 36 kv. The product range also includes tapex, push on and resin cast type cable jointing systems. The cable jointing systems as produced by us comply with most of the national/international quality standard for power cable accessories such as vde-0278, ieee-48, bs, iec, sen, esi-09-13 and is specifications which are said to be most acceptable standards by all reputed utilities all over the world. We are an iso-9001 :2008 & 14001:2004 certified company. The kits & insulators are type tested from cpri bangalore as per is: 13573 at par with cenelec hd 629 isi (vde-0278), which is world’s most stringent specifications. Our supply scope also covers for loose cable accessories which are generally an integral part of cable jointing kits like heat shrinkable anti-tracking cable breakouts, rain sheds/creepage extenders, angle/straight boots, shrouds, anti-tracking tubing’s, stress control tubing’s, cable end caps etc. We also do offer various hardware items which are generally a part of power cable splices and termination kits such as tinned copper braid, copper mesh tape, worm drive clips, under arm our back up rings, terminal lugs/connectors, etc

• Brand Name: compaqinternational

We offer Cold Shrink Outdoor Terminations. Compaq international offer a cold shrink system for outdoor applications for voltages upto 36kv (7.2kv to 36kv) for PVCXLPEPILC cables. The components are manufactured from silicone rubber which have been specially formulated to meet & even exceed the properties required for MV terminations. Cold shrink type termination products are designed to make the installation of medium voltage cable accessories as simples, as possible. Manufactured from specially formulated silicone elastomeric rubber compound and mounted on a removable spiral type plastic card, which can be easily positioned & fitted in seconds without the need of heat and naked flame which normally involve gas torche, blow lamp and gas cylinder etc on site. No special tools are required to fix & install cold shrink components.

Compaq CHLT termination kits are suitable for terminating low voltage cables with XLPE, PVC or EPR Insulations up to 1000 V, and can be used with both compression and mechanical type Lugs.  

• Brand Name: ESSKA
• AC Withstand: 75KV
• DC Withstand: 48 KV
• Discharge Extintion Voltage: 25.4KV
• Impulse Withstand: 170KV(Min)
• Cable Size: 50-95 Square mm
• Cable Type: Straight Through
• Minimum Order Quantity: 1 Piece

We are offering heat shrinkable low voltage terminations kit heat shrinkable cable jointing kits & end terminations kits the heat shrinkable cable jointing kits & end terminations kits are available for complete range of cables i.e. Xlpe/pvc and epr cables from 1.1 kv up to 36kv voltage ratings. These terminations kits are designed and developed to meet various system requirements and the heat shrinkable components are manufactured by crosslinking through radiation. 1. To offer easy to use, dependable products that meet the customer needs. 2. Development of reliable, cost effective, marketable and highly productive quality products at rapid pace. 3. To cement our position among the biggest exporter of industrial electrical components from india. salient features:­ 1. Simple and fast installation. 2. Fits a wide dimensional range reducing inventories. 3. High tracking resistance in harsh environmental conditions. Repeatable results 4. Unlimited shelf life. 5. Excellent weather & uv resistance. 6. Immediate energisation on completion. 7. Exceptional insulation & stress control properties. 8. Weight addition to cable negligible. our product:- heat shrinkable cable jointing kits & end terminations kits heat shrinkable indoor end terminations kits heat shrinkable outdoor end terminations kits heat shrinkable straight jointing kit heat shrinkable transition joints kits heat shrinkable low voltage terminations kit heat shrinkable low voltage straight joints kit cast resin joints & termination for pvc pilc xlpe cables cable terminals lugs, ferrules & connectors.

With our brilliant logistics network, we are capable to deliver the orders within the postulated time frame. Our storage facility is capacious to maintain large stock. So, clients are free to approach us for urgent and massive requirements.

Heat Shrink 11kV Indoor Termination kit 1Core Cable

The Compaq Heat shrink terminations are suitable for both indoor (cable box, switchgear, transformer, motor type) and outdoor (pole mounted) terminating of single and 3 core cables. The products are extensively used in varied industrial applications calling for low, medium and high voltage. Compaq International supplies to its customers a complete range of Cable Terminations & straight through jointing Kits. The company abides by the ethical norms & standards laid down by the industry. We use top-quality components, high-tech machinery, advanced tools and innovative technologies for fabricating the heat shrink accessories. Due to these, our extensive range of products is endowed with some exceptional features making them in great demand in the industry.

Heat Shrinkable Cable Terminations, heat shrinkable cable joints

Cable Jointing Kits, Polymer Insulators

Cable Jointing Kit, Cable Accessories, Cable Connector

Cable Jointing Kits, Heat Shrinkable Cable Jointing Kits

Power Cable Jointing Kit, Cable Termination Kit, frp cross arm, frp product

Cable Jointing Kits, Elbow Connectors

electrical cable joining kit, Cable Gland, Cable Wire

Cold Shrink Cable Jointing Kits, epoxy compounds, epoxy cables