Compaqinternational Jagadhri, yamunanagar, Haryana

We offer t-connector for 11kv ab cable. Description compaq polymeric tee connector has been designed to facilitate loop-in & loop-out connection for ht ab cable lines. The tee connector may be mounted vertically or horizontally. Compaq tap-off (tee) connector is designed for 2, 3 or 4 connection point. Installation can be made quickly and easily in the field by giving connection which is simple of bolted type. Bcic uv resistance insulating material is used for high performance to ensure years of reliable service. Bcic insulating material is uv stabilised and held in place with nuts and bolts or else it can be sealed with compaq mastic sealing tape. The compaq tap-off (tee) allows complete insulation of connections so that no bare conductors are exposed. Salient features cpri tested and meets the requirement of iec 61109. suitable aluminium busbar confirming to isiec simple and easy installation. high creepage polymer insulator. high performance insulating material. u.v resistant excellent tracking resistance.

Compaq Screened Separable Connectors or we can say Touch proof terminations are designed to connect single and three core polymeric cables to medium voltage switchgear, RMU and other equipment using bushings type "C" specified for 250A, 400A, and 630A up to 24kV. Separable Connectors are made of a highly modified EPDM rubber and protected by a touch proof outer conductive screen connected to earth. Supporting a wide application range of Touch proof terminations, the design incorporates one body and stress cone adapters to cover all cross section from 25 - 400 sq.mm.     Salient Features Provides fully screened and submersible separable connection. Mating with C - type bushings and plugs complying with EN 50180 & EN 50181 One of the most Compact design 100% factory tested Unlimited shelf life at normal storage temperatures No minimum phase clearance requirements Reduced installation time and errors Easy installation without any special tools

Compaq Premoulded (Push On/Slip On) Cable Termination Kits have been designed & manufactured to terminate all type of single and three core Polymeric (XLPE/EPR) Insulated cables. The kits are designed for various cable cross sections up to 400mm2, and can be used with both compression and mechanical type lugs. Salient Features One Piece Design with integrated stress control arrangements. Non-Flammable Easy to install with short installation time Excellent performance & reliability Silicon Rubber material for excellent electrical insulation and weathering properties Reliable operations, proven in practice In compliance with IEC-60502-4 / IS:13573

Compaq Polymer Surge Arrestors are manufactured to offer optimum protection to distribution equipment such as transformers and similar assets against the damaging lightning effects and similar operational conditions. These arrestors perform their task with high-end improvement and fidelity towards surge switching and medium voltage networks. Maintenance of service safety for both underground and overheard setups is offered without any trouble on exposure in the outdoors for long durations. Going through precision tests have made Compaq arrestors more durable & reliable.   Salient Features Direct moulded housing to prevent moisture ingress. Low residual voltages. Excellent cantilever performance. Hydrophobic Silicone Housing. Maintenance free. Quality Design and Manufacturing meeting International Standards.

Compaq maintains the highest level of IEC standards in their diversified selection of polymerized Insulators Drop/Cut Out fuses. Raw material of the highest quality is used by us for fuse unit manufacturing. silicone rubber is used for designing Compaq fuse cutouts as these insulators are able to withstand extreme cold, stressful environments, and heat present in heavily polluted locations or sea coasts. These fuses help stopping faults and are highly useful as secondary backup units for protecting the system. Our Drop out expulsion type cut out fuses are well-suited for distribution systems from 11-33 kV and also for protecting transformer Centre Tap lines and H.T. lines   Salient Features No maintenance required Easy and quick for installation Long term surface hydrophobic Properties Manufacturing at IS0 9001 & 14001 certified plants Suitable for polluted environments and salty atmospheres

We offer Metal Oxide Surge Arrester. Compaq International (P) Ltd. was quick enough to design Polymeric housed ZNO Surge Arresters using technologies which are its core competences in the field of silicone elastomers. These metal oxide Gapless Surge Arrestors have been designed, developed & manufactured in Compliance to International standard IEC 60099-4 & Indian standard IS: 3070 (Part 3). These are manufactured at our ISO 9001 & ISO 14000 certificated plant to ensure zero defect quality product meeting & even exceeding specifications cover under related International & Indian quality standards.

Brand Name : compaqinternational

We offer Horn Gap Fuse. Compaq International (P) Limited make, "Horn Gap Fuse" link consisting of iron base, having 2nos.1133 Kv. Polymeric Insulators per phase, the Insulator top and bottom part is heavy aluminium parts those not braking current, complete with aluminium or aluminium alloy high presser heavy tinned nonferrous metal contacts part complete manufactured as per IS stranded

We are established manufacturers of heat shrinkable straight through joints for XLPE PVC cables from 1.1 KV tO 36 KV, heat shrinkable jointing kits and cable jointing kits. The range of heat shrinkable jointing kits is comprehensive and highly suitable for XLPE and PVC insulated cables of different voltages. Fully tested and qualified to industry standards, these cable jointing kits feature heat activated seals and offer superior performance.

Brand Name : compaqinternational

We offer Heat Shrinkable Anti Tracking Cable. Compaq International Pvt. Ltd. manufactures and supply a wide range of superior quality heat shrinkable power cable accessories. These heat shrinkable cable accessories are most commonly used for cable applications in electrical distribution and industrial networks. Made from superior quality materials, these accessories are checked for reliability under high electrical, thermal and environmental stress.

We offer a wide range of polymeric insulator Drop Out fuse that is manufactured by using qualitative raw material. Our Drop Out fuse range is extensively applicable for system protection as secondary backup. These Drop Out fuses are also used for preventing faults and are well known for efficiency as well as durability

Brand Name : compaqinternational

We are offering constant force spring clamp description spring clamp are made from stainless steel material and it is no current carrying part. It is used for solder free electric connection between metal cable elements & earthing device. Also used for cast-resin,heat shrink and medium voltage joints. Salient features easily applied onto the sheath connection corrosion free & mechanical stable continues to exert constant pressure

We offer Composite Polymeric Insulator. We take this as an opportunity to introduce our company as one of the leading companies here in India with major activities in the field of latest technology Composite Silicon Polymeric Insulators upto 66KV. The products as produced by us comply with various NationalInternational technical specifications laid world wide over in the related field. Compaq International Pvt. Ltd. combined the technology of this highPerforming Polymer material with high mechanical strength fiberglass reinforces rod and metal end fittings to produce a high quality Shrinkfit Brand composite Polymeric insulator for various end applications

Composite Silicone Insulators produced by Compaq, yield appreciable performance even in harsh working conditions. A pultruded fiber glass rod is used as the housing over this insulator. The ends of this glass rod are secured by aluminum fittings or galvanized steel. Silicone or Ethylene Vinyl Acetate (EVA) can also be provided as the housing materials depending upon the requirements of the clients. The insulators designed by the Compaq International comprise of Polymer disc insulator, Pin type composite insulators, Polymer Strain Insulators, suspension long rod silicone rubber insulator, cross arm silicone rubber insulators, station post polymer insulators and etc.     Salient Features Recommended for use in high polluted areas Elevated mechanical strength Lighter than porcelain insulators by about 70-80%. Requires least attention towards cleaning and maintenance Easy and economical for transportation and installation Quality Design and Manufacturing meeting International Standards.

We offer compaq's cold shrinkable straight through joint upto 36kv (7.2kv to 36kv). The straight through cold shrinkable concept of splicing is a most reliable system which consists of a unique mechanism having electrical & stress relief system inbuilt. The full splicing requirements are fulfilled in "one go". It is a very quick system for having 100% fool proof system.

We offer Cold Shrink Outdoor Terminations. Compaq international offer a cold shrink system for outdoor applications for voltages upto 36kv (7.2kv to 36kv) for PVCXLPEPILC cables. The components are manufactured from silicone rubber which have been specially formulated to meet & even exceed the properties required for MV terminations. Cold shrink type termination products are designed to make the installation of medium voltage cable accessories as simples, as possible. Manufactured from specially formulated silicone elastomeric rubber compound and mounted on a removable spiral type plastic card, which can be easily positioned & fitted in seconds without the need of heat and naked flame which normally involve gas torche, blow lamp and gas cylinder etc on site. No special tools are required to fix & install cold shrink components.

This series of kits are cold shrinkable designed to provide the basic important functions required for medium voltage power cable accessories including the electrical performance, stress relieving needs, environmental seal, mechanical fatigues and other related performance parameters in different countries and various service conditions.

We are offering cold shrink indoor terminations. Compaq international offer a cold shrink system for indoor applications for voltages upto 36kv (7.2kv to 36kv) for pvcxlpepilc cables. The components are manufactured from silicone rubber which have been specially formulated to meet & even exceed the properties required for mv terminations. features : built in stress control mechanism. compact design with integrated sheds. less room for jointer error. simple installation - reduction of installation time. high reliability, stable in wide temperature range. accommodates a wide range of cable sizes. no heat or torches required & no special tools.

Brand Name : Compaq's

We offer our collection of heat shrinkable terminations for PILC cables. Superior in quality these heat shrinkable terminations are suitable for PILC Cables up to 36 KV. Easy to install, these heat shrinkable cable terminations are designed under strict quality control conditions to ensure superior performance and long serving life. Available at highly competitive prices, we can supply these accessories in customized packaging to meet special client requirements.